PNG to STL
How PNG to STL works here
A PNG often has a transparent background. The studio treats see-through pixels as empty, so the plate follows the logo’s outline instead of a square. Solid pixels are raised by the height you choose.
For a logo with two or three colours, choose the bands split and each shade becomes its own part in the 3MF, ready for a multicolour printer. For a photo PNG, switch the mode to Relief and brightness becomes height instead.
Your picture never leaves this device: the model is built in your browser.
Other ways in: Image to STL · JPG to STL · Filament painting · Drawing to 3D print.
The method
Turn an image into an STL
Add a PNG, JPG or WebP. The picture is read on your device and turned into a heightmap: every pixel becomes a height. Choose what kind of print you want, set the size, and download an STL or 3MF.
- Add a picture, or try a sample.
- Choose a mode: photo relief, logo emboss or filament painting.
- Pick a shape and size. The aspect ratio is kept, so nothing is stretched.
- Adjust the picture until the preview looks right, then download.
Modes
Three ways to print a picture
| Mode | What you get | Best for |
|---|---|---|
| Photo relief | A smooth surface: brighter is higher (or invert it). Bas-relief flattens the big shading for wall art. | Portraits, pets, landscapes |
| Logo emboss | A plate with the logo raised on it, in one or two colours | Logos, line art, signatures |
| Filament painting | A thin stepped relief that shows the picture in colour as filaments are swapped at set layers | Photos and art in colour, on any printer |
A lithophane is the opposite idea: it is lit from behind, so thickness controls how much light gets through. For that, use the lithophane generator. For a vector logo with each colour as its own part, use SVG to STL.
Filament painting
How filament painting works
Thin layers of plastic let some light through. Print a dark filament first, then lighter ones on top, and a pixel’s colour depends on how many layers of each it has: one layer of white over black looks dark grey, ten look nearly white. Each filament’s transmission distance (TD) says how quickly it hides what is below it.
- List your filaments with their colours and TD.
- The generator sorts them darkest to lightest and suggests the layer for each swap.
- Each pixel gets a height: the one whose blended colour is closest to the picture.
- Print with the swap list: add a colour change (or pause) at each listed layer, at exactly the layer heights you chose.
The blend is a model: each layer lets through a share of the light that falls off exponentially with thickness, reaching about 5% at the filament’s TD. Real filaments scatter light too, so print a small test before a big piece.
TD values
Transmission distance values
TD is the thickness at which light is effectively blocked. One filament maker publishes these values for its own colours; other brands differ, sometimes a lot, so measure yours when you can.
| Filament | Colour | TD |
|---|---|---|
| Black PLA | #080A0D | 0.1 mm |
| Grey PLA | #8C9099 | 0.4 mm |
| White PLA | #EBF7FF | 3.2 mm |
| Red PLA | #E72F1D | 1.9 mm |
| Blue PLA | #003776 | 0.3 mm |
| Yellow PLA | #FFE800 | 4.3 mm |
| Matte white PLA | #F4EFEB | 4.1 mm |
| Matte light grey PLA | #8A8C94 | 0.4 mm |
| Translucent cyan PLA | #08ABFB | 8 mm |
| Translucent magenta PLA | #D93B90 | 7.8 mm |
| Translucent yellow PLA | #F9ED3D | 14 mm |
Measure it: print a strip of steps 0.08 mm apart (the swatch generator adds thickness steps), hold it in front of a bright light, and find the thinnest step you can’t see the light through. That thickness is about the TD.
Options
Sizes and options
| Option | Range | Notes |
|---|---|---|
| Size | 30–300 mm | The longer side; the other follows the picture |
| Relief thickness | 0.4–15 mm | Thinnest and thickest; 0.8 mm minimum keeps it stiff |
| Logo | Plate 0.6–6 mm, logo 0.4–6 mm | Colour change where the logo starts |
| Filament painting | 2–8 filaments, 0.04–0.2 mm layers, 0.6–5 mm tall | Swap heights snap to whole layers |
| Frame | 1–15 mm wide | At the full height |
| Hanging hole | 3–10 mm | With a 2.5 mm ring round it |
| Detail | 0.25, 0.18 or 0.12 mm grid | Files capped at 1.5 million triangles |
Printing
Printing tips
- Print flat, picture up, with no supports.
- Filament painting: slice at exactly the layer and first-layer heights you set here, with 100% infill (aligned rectilinear if your slicer has it) so no infill pattern shows through. Common settings are 0.08 mm layers on a 0.16 mm first layer.
- Swaps: add a colour change or pause at each listed layer. On a multi-material printer, use the 3MF: each filament’s band is its own object.
- Relief: fine layers (0.08–0.12 mm) keep the detail; side lighting brings it out.
- Big files: Maximum detail on a large picture can make a file of 50 MB or more. Standard is plenty for most prints.
Questions, answered
Does a transparent PNG work?
What size PNG is best?
Can I make a photo PNG into a relief?
Is it free to use?
Yes. No account, no watermark, no limits, and your picture never leaves this device.
Will it fit my printer?
Choose your printer below the preview to check. If it is too big, lower the size; the stand prints beside the panel.
Can I sell prints I make with it?
The models you make are yours. The picture is the part to check: only use photos and art you made, bought a licence for, or have permission to use. Logos and characters are usually trademarked or copyrighted.
Which pictures work best?
For a relief, a well-lit photo with a clear subject and a plain background. For a logo, strong contrast. For filament painting, pictures with clear light and dark areas; busy, noisy photos make bigger files, so raise Denoise.
PNG or JPG?
Both work, and so does WebP. A PNG with a transparent background lets you cut the print to the picture’s own outline.
Why do my colours look different from the preview?
The preview models how each filament blends from its TD. If your filament’s TD is different, the blend will be too: measure it and enter your value. The layer heights in your slicer must also match the ones here.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-10. Community posts are one maker's experience, not a specification.
- HEX codes and transmission distances Polymaker wiki
- Wiki: quick cheat sheet (layer heights and infill for filament painting) TailWag Studio, GitHub
- Color change Prusa Research
- View slicing information (pauses and filament changes) Bambu Lab