Free tool · Runs in your browser

STL viewer Look before you slice.

Open STL, 3MF and OBJ files in your browser. Check the size and the mesh, estimate weight and cost, and see which printers it fits. Nothing is uploaded.

  • PrivateFiles never leave your device
  • STL, 3MF, OBJBinary, ASCII and projects
  • Mesh checkWatertight and overhangs
  • Printer fitAcross our catalog

Drop a file anywhere here · Drag to rotate · Scroll or pinch to zoom

Size
—
Volume
—
Weight
—
Fits
—

File

Size and orientation

STL and OBJ files don’t say their units. If the model looks 25 times too small, it was made in inches.

100 %
Turn 90°

Mesh check

Watertight
—
Separate bodies
—
Triangles
—
Surface area
—
Overhang area
—

Weight and cost

2
15 %
Estimated weight
—
Filament
—
Material cost
—
If printed solid
—

An estimate from walls and infill; your slicer gives the exact figure. How it’s worked out

Download

Download as

For files with several objects or plates. 3MF always keeps them as parts.

Off keeps the original position.

Open a file to convert it.

Your file is read on this device and is never uploaded.

Advertisement

The method

Look at a model before you print it

Drop in an STL, 3MF or OBJ and the model appears on a build plate you can turn and zoom. The readouts give its size, volume and estimated weight. The fit count shows how many printers in our catalog can hold it, and choosing your printer draws its bed under the model.

  1. Open the file. It is read in your browser; nothing is sent to a server.
  2. Fix the size if needed: wrong units are the usual reason a model looks tiny.
  3. Check the mesh, then download it in the format you need.

Mesh check

What the checks mean

  • Watertight: every edge is shared by exactly two triangles facing the same way. Slicers need this to know what is inside the part.
  • Open edges are holes in the surface; non-manifold edges are shared by three or more triangles; flipped faces point inward. Most slicers repair small problems on import, but a clean mesh slices predictably.
  • Separate bodies are pieces that don’t touch. Several bodies in one STL is normal for print-in-place parts and plates of parts.
  • Overhang area is surface facing down at more than 45° from vertical, not counting the face on the bed. It’s a rough guide to where supports may be needed.

Estimates

How the weight is worked out

A printed part is a solid skin plus sparse infill. The tool takes the surface area times the wall thickness (walls × 0.42 mm lines) as the skin, fills the rest of the volume at your infill percentage, and multiplies by the material’s density. Your slicer knows the real toolpaths, so treat this as a quick estimate.

MaterialDensitySource
PLA1.24 g/cm³Prusament PLA data sheet (ISO 1183)
PETG1.25 g/cm³Polymaker PolyLite PETG
ABS1.04 g/cm³Polymaker PolyLite ABS
ASA1.13 g/cm³Polymaker ASA
TPU 95A1.22 g/cm³Polymaker PolyFlex TPU95
PC1.19 g/cm³Polymaker PolyLite PC
Nylon (CoPA)1.12 g/cm³Polymaker PolyMide CoPA
PLA-CF1.29 g/cm³Polymaker PLA-CF

Densities vary by brand and colour, by a few percent. Check your filament’s data sheet for its exact value.

Units

Why a model comes in at the wrong size

STL and OBJ files store bare numbers with no unit. Slicers assume millimetres, so a model made in inches arrives 25.4 times too small, and one exported from Blender in metres arrives 1,000 times too small. 3MF states its unit (micron, millimetre, centimetre, inch, foot or metre), and this tool reads it.

Made inSet “File units” toSize change
Inches (many US CAD exports)Inches× 25.4
CentimetresCentimetres× 10
Metres (Blender’s default)Metres× 1,000

Questions, answered

Is my file uploaded?

No. The file is read by your browser and processed on your device. Nothing is sent to 3Dprintsy or anyone else.

How big a file can it open?

Models up to a few million triangles open in most desktop browsers. Very large scans may need simplifying first.

Can it open STEP or other CAD files?

Not yet. It opens STL, 3MF and OBJ, and can write STEP.

Sources

Print advice is a starting point drawn from these references, checked on 2026-11-07. Community posts are one maker's experience, not a specification.

  1. STL (STereoLithography) File Format Family Library of Congress
  2. 3MF Core Specification 3MF Consortium
  3. Wavefront OBJ File Format Library of Congress
  4. Prusament PLA technical data sheet Prusa Research
  5. Technical data at a glance (densities) Polymaker