Free generator · Runs in your browser

Pet tag generator Name on the front. Number on the back.

Make a 3D printable pet ID tag: bone, round, heart, paw or dog tag, with the name raised on the front and your number engraved into the back, in one print.

  • Private by designDetails stay on this device
  • Six shapesBone, heart, paw and more
  • Two sides, one printBack reads when turned over
  • Ready to sliceSTL, 3MF and per-colour files

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Shape

Tag shape
34 mm

The longest side. 25–30 mm suits cats and small dogs; 35–45 mm, big dogs.

66 mm

Name and details

Make several of every item, such as spares or a whole plate of one name.

Check every tag

    One per line, up to 40. Add | for a second line, and an order number in square brackets to name each object without printing it: [1042] Olivia | Class 3. Pick your printer below the preview to fill its plates.

    Up to three short lines, such as a phone number, “Microchipped” or “I need meds”. Lines after a | in the list above replace it for that tag.

    Back
    Name typeface
    0.20 mm

    Style

    Name
    1.0 mm
    0.6 mm
    3.0 mm

    Attach

    How it attaches
    4.2 mm
    2.2 mm
    Collar width

    Two slots the collar threads through, so the tag lies flat and never jingles. Bone, round and dog tag shapes only; the tag grows if it needs to.

    Bag tags get a strap slot at the clipped end, for a luggage strap, cable tie or key ring.

    Colours

    Download

    Building the preview…

    Print it well

      Everything is built on this device. Nothing you type or upload is sent anywhere.

      Advertisement

      The method

      Make a pet tag in four steps

      Pick a shape, type the name and the details for the back, and the generator fits both inside the outline. The back is engraved into the face that prints on the bed, mirrored, so it reads correctly when you turn the tag over: two sides from one print, with no flipping.

      1. Choose a shape and size. Bone, round, heart, paw or dog tag; or a bag tag.
      2. Type the name and the back. A phone number is the most useful thing on a tag.
      3. Choose how it attaches. A ring loop, slide-on collar slots (silent) or a strap slot.
      4. Download and print. The page gives the colour-change height for a two-colour name.

      The back

      What to put on the back

      • A phone number, written the way you’d dial it.
      • “Microchipped”, so a finder knows a vet can scan for you.
      • A medical note, such as “Needs meds” or “Deaf”.
      • Keep it short. Three lines fit a 34 mm tag at about 3–4 mm per letter. Longer lines shrink, and the studio warns you when they get too small to read.

      The back uses Atkinson Hyperlegible, a typeface designed by the Braille Institute for legibility, so numbers like 1, 7 and 0 stay distinct even when small.

      Attaching

      Ring, slide-on or strap?

      OptionBest forNotes
      Ring loopMost collarsTakes a split ring or S-hook. Keep the loop wall 2 mm or thicker for big dogs.
      Slide-onQuiet pets, cats, active dogsThe collar threads through two slots, so the tag lies flat and silent. Choose your collar width; the tag grows to fit the slots with a wall around them.
      Strap slotBags, luggage, keysA slot at the clipped end for a strap, cable tie or ring.

      Printing

      Tough, readable tags

      • Material: PETG or TPU stand up to chewing, sun and water better than PLA, which can get brittle and soften in a hot car.
      • Bed: the back prints against the bed, so a smooth plate gives the crispest details.
      • Contrast: rub acrylic paint into the engraving and wipe the surface.
      • Check it: tags wear. Look at the loop now and then and reprint when it thins.

      Questions, answered

      Is it free to use?

      Yes. No account, no watermark, no limits.

      Can I make tags for several pets, or a batch of orders?

      Yes. One name per line (up to 40), with the back’s lines after a |: Max | 555 0100 | Microchipped. Import a CSV from your shop, pick your printer and the tags fill its plates. The proof sheet and batch list help you check every tag before printing.

      Is a 3D printed tag safe for my pet?

      A tag on a collar is fine for most pets, but any tag can be chewed. Check it regularly, and never use a tag as a toy. Small tags are a choking hazard for pets and young children if they come off.

      Which typefaces can I use, and can I sell what I make?

      All the typefaces are open-licensed (SIL Open Font License or Apache 2.0), which allows using them to make physical products, including ones you sell.

      Sources

      Print advice is a starting point drawn from these references, checked on 2026-11-08. Community posts are one maker's experience, not a specification.

      1. Atkinson Hyperlegible typeface Braille Institute
      2. Color change Prusa Research
      3. SIL Open Font License SIL International