The method
How a layered shadow box works
A shadow box tells a picture in depth. Each layer is a flat plate cut out wherever you can see through it to the layers behind. The front layer holds only the nearest shapes; each layer behind adds the next, and the back layer is the sky with the sun, moon or stars cut out. Lit from behind, the layers become silhouettes with the light glowing between them.
- Pick a scene or upload your picture. The generator splits it into layers by brightness or colour.
- Set the layers: how many, how far apart, and the smallest feature your printer should make.
- Size the frame, choose a window shape, and add the light, a foot or a keyhole.
- Print every part flat, each layer in its colour, and stack them into the frame front to back.
Parts
What you print
| Part | What it does | Print it in |
|---|---|---|
| Frame | The front border and window, and the tray the layers sit in | Any colour; it prints face down |
| Layers 1 to 8 | The cut-out picture, front to back, each with a spacing rim behind | A gradient from your front colour to your back colour |
| Diffuser and LED ring | A thin plate that spreads the light, and the ring the LED strip sticks to | White or natural, so it glows evenly |
| Back cover | Closes the box; optional keyhole | Any colour |
| Stand foot | Holds the box upright | Any colour |
Light
Lighting it safely
- USB LED strips only. USB power is 5 V. LED strips still run warm, so the ring keeps them off the layers. Never put a mains-powered light, a bulb or a candle in a printed box.
- Keep it cool: PLA softens above about 60 °C, so keep the box away from heaters and strong sun.
- Warm white light suits sunsets; cool white suits night scenes and snow.
- Even glow: a deeper cavity and a slightly thicker diffuser hide the LED spots.
Printing
Printing tips
- No supports: every part is flat. The layers print rim up.
- Fit: layers have 0.3 mm of room each side in the frame, and the back cover 0.2 mm, so it presses in.
- Fine details: raise the smallest feature if thin parts break, or lower it with a 0.25 mm nozzle.
- Colours: one filament per layer on a single nozzle, one layer at a time. Pale layers let a little light through; dark layers stay crisp.
Questions, answered
Is it free to use?
Yes. No account, no watermark, no limits. Your picture never leaves this device.
Will it fit my printer?
Choose your printer below the preview and switch the preview to Laid out to print. The frame is the biggest part; layers and the rest spread over as many plates as needed.
Can I sell shadow boxes I print?
The designs you make are yours, and the built-in scenes are original drawings anyone may use. If you upload a picture, make sure you have the right to use it.
Why did some pieces get bridges?
A shape that touches nothing else in its layer, such as a cloud or a bird, would fall out. A thin bridge ties it to the nearest solid part. Choose Keep them loose to glue such pieces to the layer behind instead.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-10. Community posts are one maker's experience, not a specification.
- USB hardware: power Wikipedia
- LED strip light Wikipedia
- PLA Prusa Research