Free generator · Runs in your browser

Place card and table set generator Every guest, one list.

Paste your guest list and print a whole table set: a place card, napkin ring, drink marker and name ornament for every guest, plus table numbers, packed onto your printer’s plates. Themes for Thanksgiving, Christmas, weddings and birthdays.

  • Private by designNames stay on this device
  • One list, every pieceUp to 60 guests
  • Five themesLeaves, snowflakes, hearts and more
  • Ready to sliceA file per plate, names in colour

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Guests

One name per line, up to 60. Add a table number after a comma if you like: Emma, 3. Emma (3) and Emma; table 3 work too.

Check every guest
    Theme

    A theme sets the motif, typeface and colours. You can change each one below.

    Typeface
    0.30 mm

    Grows thin strokes, so script names print cleanly on small pieces.

    Place cards

    Card
    85 mm

    Every card is the same width; long names shrink to fit.

    40 mm

    Along the face of a standing card. Plaques come out about two thirds as tall.

    Measure your paper card or menu and add about 0.3 mm.

    On the cards, plaques and initial drink markers.

    Napkin rings

    Ring

    Fold and roll one of your napkins, then measure across it.

    2.0 mm

    Added to the napkin’s diameter so it slides in easily.

    28 mm

    Drink markers

    Marker shows

    Measure the thinnest part of the stem where the marker will sit.

    1.0 mm

    How much narrower the clip’s opening is than the stem. More grip holds tighter but is harder to push on.

    Numbers and ornaments

    4

    Used when the guest list has no table numbers; otherwise every table up to the highest number on the list is made.

    The name on a hanging tag, to take home or hang on the tree.

    4.0 mm

    Style

    0.8 mm
    3.0 mm

    Plaques, drink markers and ornaments. The colour change goes at this height.

    So a colour change at the flat pieces’ height doesn’t touch the standing ones.

    Download

    Building the preview…

    Print it well

      Everything is built on this device. Nothing you type or upload is sent anywhere.

      Advertisement

      The method

      A place setting for every guest

      Type your guest list once and the generator makes every guest’s pieces from it: a place card, a napkin ring, a drink marker and an ornament to take home, plus a standing number for every table. Everything is packed onto your printer’s plates, each type together.

      1. Paste the guest list, one name per line. Add a table number after a comma for table numbers: Emma, 3. The check under the list shows any line it could not read.
      2. Pick a theme. It sets the motif, typeface and colours.
      3. Turn on the pieces you want and measure what they fit: a rolled napkin for the rings, a glass stem for the drink markers.
      4. Pick your printer below the preview. The readout shows how many plates the set needs.
      5. Download and print. Each plate is its own file, and every piece is named after its guest.

      Pieces

      What it makes

      PiecePrintsSized by
      Tent cardUpright, on its two feet; the name on both facesCard width and height
      Easel cardUpright, a steep front with a back legCard width and height
      Stand with card slotUpright; the name on the sloped front and a slot on top for a paper card or menuCard width and the slot width you measure
      Flat plaqueFlat, with a raised rim, motif and nameCard width and height
      Napkin ring or clipUpright on its end, with a flat badge for the nameYour rolled napkin’s diameter plus the extra room
      Drink markerFlat; a clip that snaps onto the stem and a tag with the name or initialYour glass stem’s diameter and the grip
      Table numberUpright, like a large tent cardOne per table, 1 to the highest number
      Name ornamentFlat, the name on a tag with a hanging loopThe length of the name

      Themes

      Themes and ideas

      ThemeMotifTypefaceColours
      ThanksgivingLeaf or pumpkinScriptOrange with white names
      ChristmasSnowflake or treeRoundedGreen with white names
      WeddingHearts or ringsElegant scriptWhite with gold names
      BirthdayBalloon or starRoundedYellow with red names
      PlainNoneLegibleWhite with black names

      Printing

      Printing tips

      • Two colours on one nozzle: flat pieces (plaques, drink markers, ornaments) take a colour change at their thickness, where the names start. Standing pieces carry the name on an upright face, so give the Names part its own filament on a multi-material printer, or print them in one colour.
      • No supports: standing cards, rings and numbers print upright with sloped or vertical faces; flat pieces print face up.
      • Test one first: print a single napkin ring and a single drink marker, and try them on your own napkin and glass before printing the whole set.
      • Drink markers: PETG flexes without cracking, so the clip snaps on and off many times. They go on the stem, away from the drink.
      • Script names: raise Thicken letters to 0.3 mm or more so thin strokes print.
      • Care: PLA softens in a hot dishwasher; wipe pieces clean by hand.

      Questions, answered

      Is it free to use?

      Yes. No account, no watermark, no limits.

      Will it fit my printer?

      Choose your printer below the preview and the set is packed onto its plates; the readout shows how many plates it takes. Without a printer the plates are 256 × 256 mm.

      How many guests can I add?

      Up to 60 in one set. For a bigger event, split the list and make two sets.

      Can I sell sets I print?

      The designs you make are yours. The typefaces are open-licensed, which allows making physical products. Drink markers and ornaments are small parts, so check the rules that apply where you sell.

      Sources

      Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.

      1. Color change Prusa Research
      2. PETG Prusa Research
      3. PLA Prusa Research
      4. SIL Open Font License SIL International