Free generator · Runs in your browser

Sundial generator Made for your latitude.

A sundial only works where it was drawn for. Choose your place and get a garden, wall, desk or analemmatic dial with every hour line worked out, the gnomon at the right angle and the time correction for your zone.

  • Private by designYour location stays here
  • Any place on EarthLines worked out for you
  • No supportsPlate and gnomon print flat
  • Ready to sliceSTL and two-colour 3MF

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Place

Press Enter or Search. Only the words you search for are sent, to the OpenStreetMap place search (Nominatim; data © OpenStreetMap contributors, ODbL).

    Your location is asked for only when you press the button, and stays on this device.

    Hemisphere

    Latitude as a positive number, with the hemisphere set here. Longitude is positive east of Greenwich, negative west. Dials work from horizontal 10–85°, vertical 10–80°, equatorial 15–80°, analemmatic 15–80° of latitude.

    Time

    The dial reads

    Your zone’s offset in winter, without daylight saving: 0 for London, +1 for Paris, −5 for New York, +10 for Sydney.

    “My time zone” turns the hour lines by 4 minutes for every degree you are east or west of your zone’s central meridian. Either way the readout shows the correction.

    A second, smaller ring of numerals one hour on, to read daylight saving time.

    A small plaque with the minutes to add each month (the equation of time).

    Dial

    Type
    0 °

    0° for a wall facing due south (due north in the southern hemisphere). Positive if it turns west, negative if east. Measure with a compass and correct for magnetic declination.

    A disc in the plane of the equator on a rod that points at the celestial pole. Summer hours show on the top face, winter hours underneath.

    Hour points on an ellipse, and a date scale. Stand a peg or pencil in the slot at today’s date: its shadow points to the hour.

    Plate shape
    200 mm

    Across the plate or disc. Pick your printer below the preview to check it fits.

    5.0 mm

    Gnomon

    Gnomon
    3.0 mm

    The hour lines start from both faces of the gnomon, so the dial stays right however thick it is.

    Rod or peg

    Measure your rod, dowel or pencil with calipers. The holes add the clearance below.

    Gap added to slots and holes. 0.2–0.3 mm suits most printers; print a fit test if unsure.

    Marks

    Lines and numerals
    0.8 mm
    Lines
    Numerals

    Short works best: Tempus fugit, Carpe diem, I count only the sunny hours.

    Typeface

    Mount

    Mounting

    Measure the screw’s shank. Use stainless screws outdoors.

    A blind socket under the plate centre, for a dowel or bolt set in your post or pedestal. Measure it; the plate becomes at least 6 mm thick.

    The equatorial dial comes with its own stand: a base, and a socket that holds the rod at your latitude.

    Colours

    Preview

    Download

    Building the preview…

    Print it well

      Everything is built on this device. Nothing you type or upload is sent anywhere.

      Advertisement

      The method

      How to make a sundial for your place

      A sundial only tells the time where it was drawn for: the hour lines depend on your latitude. Choose your place and the generator works out every line, the gnomon angle and the time correction, and builds a plate you can print.

      1. Find your place: search, pick a city, type the coordinates, or use your location.
      2. Choose the time: local sun time, or lines turned to read your time zone.
      3. Pick a dial: a flat garden dial, a wall dial, an equatorial desk dial or an analemmatic dial.
      4. Style it: numerals, lines, a north arrow and a motto, raised in a second colour or engraved.
      5. Download, print and set it up as described below.

      Dial types

      Which sundial?

      DialWhere it goesGnomonHour lines
      Garden (horizontal)Flat and level on a post or wall topWedge at your latitudetan θ = sin φ · tan(15° × h)
      Wall (vertical)A wall facing the equator, or turned up to 45°Wedge at 90° minus your latitudetan θ = cos φ · tan(15° × h) on a wall facing due south (north in the south); turned walls use the declining-dial formula
      EquatorialA desk or shelf in the sunA rod along the Earth’s axisEvenly spaced, 15° per hour, on both faces
      AnalemmaticFlat and levelA vertical peg or pencil moved along the date scaleHour points on an ellipse; the peg moves with the season

      φ is your latitude and h the hours from noon. Hours appear only when the sun can reach them on the longest day.

      Reading it

      Sun time and clock time

      A sundial shows sun time. Three things separate it from your clock:

      • Longitude: 4 minutes for every degree you are from your zone’s central meridian (15° × the UTC offset). Choose “My time zone” and the lines include it.
      • The equation of time: the Earth’s tilted, oval orbit makes sun time run up to 16 minutes ahead or 14 behind through the year. Add the plaque, or use the table below.
      • Daylight saving: add one hour in summer, or turn on the summer-time numerals.
      MonthEquation of time (min)Add to the dial in London
      January-9+9 min
      February-14+15 min
      March-10+10 min
      April+0+1 min
      May+4-4 min
      June+0+0 min
      July-6+6 min
      August-5+5 min
      September+5-4 min
      October+14-14 min
      November+15-15 min
      December+5-5 min

      Mid-month values from the NOAA approximation; they change by a minute or two within a month. The studio’s advice gives the table for your own place.

      Setting up

      Setting it up

      • Point to true north, not magnetic north. A compass points to magnetic north, which can be several degrees away from true north; the difference (magnetic declination) depends on where you are and changes slowly over the years. Look yours up with the NOAA magnetic field calculator, or turn the dial until it reads the correct time at noon on a day the table shows close to 0.
      • Level it. A garden or analemmatic dial must be flat: check with a spirit level in two directions. A wall dial must hang plumb.
      • Gnomon: the sloping edge points to the pole (north in the northern hemisphere, south in the southern) and rises at the angle in the readout.
      • Equatorial dial: the rod sits in the stand at your latitude. Turn the disc on the rod until the noon mark is at its lowest point, then fix it with a drop of glue.
      • Analemmatic dial: stand the peg in the slot at today’s date mark (January to June on one side, July to December on the other).

      Printing

      Printing tips

      • Outdoors, use ASA or PETG. ASA resists UV light and heat; PETG suits most outdoor use below 80 °C. PLA softens in hot sun and goes brittle.
      • Two colours on one nozzle: raised lines with a colour change at the plate’s thickness.
      • No supports for the plate, gnomon and rod. The equatorial stand’s socket leans at your latitude; below about 40° its underside overhangs steeply, so add supports under it there.
      • Slot fit: the clearance you set is added on every side. Print the gnomon first and test it.

      Questions, answered

      Is it free to use?

      Yes. No account, no watermark, no limits.

      Will it fit my printer?

      Choose your printer below the preview. If the dial is too big, lower the size; in the print layout the plate, gnomon and plaque spread over as many plates as needed.

      How accurate is it?

      The lines are exact for the latitude used. In practice a printed dial reads to a few minutes, set by how well it is levelled and pointed. Sun time also drifts from clock time through the year: see the table.

      Can I sell sundials I print?

      The designs you make are yours, and the typefaces are open-licensed, which allows making physical products. Sundial geometry is centuries old and free for anyone to use.

      Sources

      Print advice is a starting point drawn from these references, checked on 2026-11-11. Community posts are one maker's experience, not a specification.

      1. Sundial mathematics: calculating dial lines North American Sundial Society
      2. The Sundial Primer: vertical declining sundial (Carl Sabanski) mysundial.ca
      3. The Sundial Primer: longitude correction (Carl Sabanski) mysundial.ca
      4. The Sundial Primer: analemmatic sundial (Carl Sabanski) mysundial.ca
      5. Analemmatic sundials: how to build one and why they work (Chris Sangwin and Chris Budd) Plus Magazine, University of Cambridge
      6. General solar position calculations (equation of time and declination) NOAA Global Monitoring Laboratory
      7. Magnetic field calculators (declination) NOAA National Centers for Environmental Information
      8. British Sundial Society British Sundial Society
      9. ASA Prusa Research
      10. PETG Prusa Research
      11. Nominatim usage policy OpenStreetMap Foundation
      12. Copyright and licence OpenStreetMap
      13. Color change Prusa Research
      14. SIL Open Font License SIL International