Free generator · Runs in your browser

Chess set generator Your set, every piece.

Make a full matching chess set and board: all 32 pieces in four styles, sized from the king, weighted with washers or coins, felt recesses, a board split to fit your printer, storage trays and a travel peg set.

  • Private by designNothing leaves this device
  • Four stylesClassic to low-poly
  • No supportsPieces print upright
  • Ready to sliceEvery piece its own object

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Set

Make
Style
75 mm

The queen, bishop, knight, rook and pawn follow in the standard proportions (95 : 85 : 70 : 60 : 55 : 50).

Square size
50 mm

The king’s base is about 75 % of the square. Tournament boards use 50–60 mm squares.

50 mm

For an existing set, make the square about 1.3 times your king’s base.

22 mm

The pieces scale with it: the king is 1.8 times the square.

Weights

Measure your own coins or washers: they vary a little. Pieces too small for the weight get none.

Only for the added-weight estimate.

2
Pocket

A shallow recess under each base for self-adhesive felt. It hides the pocket too.

1.0 mm

Weights and felt are for full-size pieces. Board-only and travel sets have none.

Board

6.0 mm
Dark squares
0.6 mm

For the dark squares when raised, and for the coordinates.

Typeface

Pick your printer below the preview; without one the tiles fit a 256 × 256 mm bed.

Tiles join with

Choose “Pieces and board” or “Board only” for a board.

Colours

Preview

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    How to make a chess set

    Set the king’s height and the generator sizes all 32 pieces from it, links each base to the square size, adds pockets for weights and recesses for felt, splits the board into tiles that fit your printer, and packs everything onto plates, one colour at a time.

    1. Pick what to make: a full set, pieces, a board or a travel set.
    2. Pick a style and the king’s height.
    3. Add weights if you like: washers, nuts or coins you have.
    4. Download and print. Each piece is its own object, and each colour gets its own plates.

    Sizes

    Piece sizes

    PieceShare of king95 mm king75 mm king
    King100 %95 mm75 mm
    Queen89 %85 mm67 mm
    Bishop74 %70 mm55 mm
    Knight63 %60 mm47 mm
    Rook58 %55 mm43 mm
    Pawn53 %50 mm39 mm

    The heights follow FIDE’s standard proportions. FIDE also asks that each base is 40–50 % of the piece’s height, that squares are 5–6 cm, and that four pawns fit on one square. The link between king and square (the king’s base is about 75 % of the square) is a common rule of thumb, not a FIDE rule. The generator keeps the base between 38 % and 55 % of the height and tells you when the square pushes it to a limit.

    Styles

    The four styles

    StyleLookKnight
    Classic turnedTurned profiles with beads and collars, a crown of points on the queen, a cross on the king and battlements on the rookA flat-sided horse head with bevelled edges
    Modern minimalistSmooth tapered columns with a simple top for each pieceAn abstract block head
    Faceted geometricThe classic shapes with eight zigzag facetsA faceted horse head
    Low-polyThe classic shapes with six sides and fewer stepsA simplified horse head

    Printing

    Printing tips

    • No supports for the pieces: undersides are kept to about 45° or less.
    • Sealed weights: add a pause at the height shown, drop the weights in, then resume. The roof prints onto the weights.
    • Open pockets and felt recesses have flat roofs that print as short bridges. The felt hides them.
    • Two-colour board: raised squares with a colour change on one nozzle, or the flush inlay on a multi-material printer.
    • Tiles: the joins sit in the lower half, so the squares on top stay whole. Join keys are 0.15 mm smaller than their notches.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview. The board splits into as many tiles as your bed needs, and the pieces spread over as many plates as needed, with each colour on its own plates.

    Can I sell sets I print?

    The designs you make are yours, and chess is a traditional game anyone may make. The piece shapes here are original, not copies of any maker’s set. The typefaces are open-licensed, which allows making physical products. Pieces are small parts, so check toy-safety rules before selling for children.

    How heavy will the pieces be?

    The advice under the preview adds up the weights you chose. Steel washers and nuts add the most; coins work too. Measure yours, as sizes vary a little.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.

    1. Chess equipment without electronic components (from 1 March 2026) FIDE Handbook
    2. ISO 7089 plain washers, normal series Westfield Fasteners
    3. Insert pause or custom G-code at layer Prusa Research
    4. Color change Prusa Research
    5. SIL Open Font License SIL International