Free generator · Runs in your browser

NFC tag holder generator Tap, and it opens.

Make a keychain, coaster, business card or table sign with a hidden pocket for an NFC tag, and get the exact layer to pause at to drop the tag in. Or print an open pocket and glue the tag in.

  • Private by designNothing leaves this device
  • Four holdersKeychain, coaster, card, sign
  • Exact pause layerFor your layer height
  • Ready to sliceSTL, 3MF and per-colour files

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Holder

Make a
Keychain shape
Coaster shape
100 mm

The size of a bank card (ID-1, 85.6 × 54 mm). It grows if the tag needs more room.

140 mm

A separate stand with a slot that leans the sign back 15°.

4.0 mm

Rounded to whole layers. It grows if the tag, floor and cover need more.

Tag and pocket

Sticker and card sizes from retailer spec sheets. Thickness varies by make, so measure yours if you can.

Tag shape

Measure with calipers, including any adhesive and backing you leave on.

0.40 mm

Gap around the tag on every side.

0.20 mm

Extra depth over the tag, so the nozzle clears it after the pause. The pocket rounds up to whole layers.

Fitting the tag

The tag is hidden inside. Pause at the layer shown below, drop the tag in, and resume.

Glue the tag in, no pause needed. The part prints face down, so the text is engraved into the face.

Layers and pause

Use the same layer height as your slicer profile: the pause layer depends on it.

3 layers

At least 2 solid layers. Every extra layer puts the tag further from the phone, which shortens the read range.

Preview

Decoration

Up to two lines, such as “Scan me”, “Guest Wi-Fi” or a name.

10.0 mm

Shrinks to fit if the text is too long.

Typeface

A dot and three arcs that show where to hold the phone.

0.8 mm

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    How to hide an NFC tag in a print

    An NFC tag is a thin sticker or card with a chip and an antenna. Phones read it when held close, through plastic. The generator makes a holder with a pocket sized to your tag, and tells you the layer to pause at so you can drop the tag in and print over it.

    1. Pick the holder: keychain, coaster, business card or table sign.
    2. Pick your tag, or measure your own.
    3. Enter your slicer’s layer height and first layer height.
    4. Download and slice. Add a pause at the layer shown under the preview.
    5. At the pause, lay the tag in the pocket and resume. The print closes over it.
    6. Write the tag with an NFC app on your phone.

    Tags

    Tag sizes

    TagSizeThicknessGood for
    Round sticker, 25 mm25 mm across0.27 mmKeychains, small coasters
    Round sticker, 30 mm30 mm across0.27 mmCoasters, signs
    Square sticker38 × 38 mm0.27 mmSigns, business cards
    NFC card85.6 × 54 mm (ID-1)0.9 mm (thicker than the 0.76 mm ID-1 card)Large signs
    Your own tagMeasuredMeasuredCoins, key fobs, anything else

    Sticker thickness depends on the make: paper, plastic and wet inlays differ. The pocket rounds its depth up to whole layers and adds the depth clearance, which covers most stickers. If yours is thicker, choose Measure your own tag.

    Pausing

    Adding the pause in your slicer

    The pocket’s top is the end of a layer. The pause goes before the next layer, the first one that covers the pocket. The page gives that layer’s number and height for the layer settings you enter.

    SlicerAdd the pauseNote
    PrusaSlicerSlice, drag the layer slider to the pause layer, then right-click the plus icon and choose to insert a pause.The pause comes before the selected layer prints.
    Bambu StudioSlice, drag the layer slider to the pause layer, right-click it and choose Add pause.Check in the preview which layer the pause marker sits on.
    CuraExtensions, Post Processing, Modify G-Code, Add a script, Pause at height. Choose to pause by layer.Enter the last layer to finish before the pause: one less than the layer shown here.

    After the pause, the printer prints the cover straight over the tag. Most printers park the nozzle and wait for a button press. Keep your hands clear of the hot nozzle while placing the tag.

    Read range

    Cover thickness and read range

    NFC works over about 4 cm or less, and small tags read over less, so every millimetre of plastic between the tag and the phone uses up range. The default cover is 3 layers. Two solid layers is the least that closes the pocket cleanly. Metal behind a tag can stop it reading altogether, so keep metal coasters and stands away from it.

    Writing the tag

    What a tag can hold

    A tag stores a short message that a phone app writes after printing, through the plastic. Common contents are:

    • A link: a menu, a review page, a portfolio or a playlist. Most phones open links from a tag without any app.
    • Wi-Fi details: some phones join a network straight from a tag. Others only open links, phone numbers, email and text messages from a tag without an app, so for guests on any phone, a link to a page with the details works best.
    • A contact card: name, phone and email. Contact cards are larger, so pick a tag with more memory.

    Shops list each tag’s chip and its user memory. The three most common sticker chips hold:

    User memoryRoom for
    144 bytesA link or a Wi-Fi login
    504 bytesA short contact card
    888 bytesA full contact card

    Printing

    Printing tips

    • Match the layers: slice with the layer and first-layer heights you entered, or the pause layer changes.
    • Check the preview: the layer under the pause should still show the open pocket.
    • Stickers: peel the backing and stick the tag to the pocket floor so it can’t move.
    • Test first: write the tag and test it before sealing it in. Writing works through the plastic afterwards too.
    • Two colours: raised text and symbol print in a second colour with a colour change at the top of the holder.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview. Keychains, coasters and cards fit any printer; for a big sign, lower the sign width.

    Can I write the tag after printing?

    Yes. Phones read and write tags through the plastic cover. Test the tag before you seal it in, because a faulty tag can’t be swapped afterwards.

    Why does my phone not read the tag?

    Hold the phone’s NFC spot (often near the camera) flat over the tap symbol. Make sure NFC is on, the cover isn’t too thick, and there’s no metal behind the tag.

    Can I sell holders I print?

    The designs you make are yours. The typefaces are open-licensed, which allows making physical products. Tags are small parts, so check toy-safety rules before selling to children.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-10. Community posts are one maker's experience, not a specification.

    1. NFC Sticker - NTAG213 - 25 mm Circle GoToTags
    2. NFC Label - NTAG213 - 30 mm circle GoToTags
    3. NFC Label - NTAG213 - 38 × 38 mm GoToTags
    4. Glossy white PVC NFC card - NTAG215 GoToTags
    5. ISO/IEC 7810 (ID-1 card size) Wikipedia
    6. NTAG 213/215/216 data sheet NXP Semiconductors
    7. Insert pause or custom G-code at layer Prusa Research
    8. View slicing information (pauses and filament changes) Bambu Lab
    9. Pause at height post-processing script UltiMaker Cura (GitHub)
    10. Near field communication overview Android Developers
    11. Adding support for background tag reading Apple Developer
    12. How to create an NFC tag that connects any Android phone to a Wi-Fi network How-To Geek