Free generator · Runs in your browser

Play food cookie generator Sweet, but not to eat.

Make toy cookies for pretend play: iced with sprinkles, chocolate chip, sandwich or jam, with a name piped on, a box or jar for the set, and a matching cutter for real baking.

  • Private by designNothing leaves this device
  • Eight shapes or yoursTrace any image or SVG
  • No supportsSprinkles fused, not loose
  • Ready to sliceEach colour its own part

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Shape

Shape
1.0 mm

Closes small gaps and fills tight inside corners.

75 mm

Measured along the longer side. Real cookies are often 60–90 mm.

Cookie

Style
8.0 mm
Edge
3.0 mm

How far the rounded or bevelled top edge reaches in. Printed as fine steps, like layer lines.

1.0 ×

More or fewer chocolate chips. Each is fused to the dough.

2.4 mm
0.45 ×

Relative to the widest round spot of the shape.

Icing

Icing edge
2.0 mm

How much bare cookie shows around the icing. Scallops and drips reach out to this line.

1.4 mm
2.5
Sprinkle colours
7

Each number scatters the sprinkles (and drips) differently.

Icing and sprinkles go on iced cookies. Pick the Iced style to add them.

Name

One per line, up to 12; each cookie in a set takes the next line. Leave empty for none.

Typeface
0.9 mm

Names go on iced, sandwich and plain cookies.

Piped on gingerbread people that have no name, including those in a holiday set.

Set

1
Holder

A cutter in the same outline, for baking real cookies to match.

14.0 mm
Preview

Colours

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    Make a set of play cookies

    Pick a shape and a style, decorate it, and the generator builds each colour as its own part: the cookie, the icing, the sprinkles and the piping. Everything runs on your device.

    1. Choose a shape, or trace your own image or SVG.
    2. Pick a style: iced, chocolate chip, sandwich, thumbprint jam or plain.
    3. Decorate: the icing edge, sprinkles and a name.
    4. Make it a set: up to 12 cookies with a tray, plate, box or jar sized to fit, and a matching cutter if you like.
    5. Download and print flat, with no supports.

    Styles

    Cookie styles

    StyleWhat printsColours
    IcedCookie, icing (smooth, scalloped, drips or a piped line), sprinkles, nameUp to 6
    Chocolate chipCookie with chips fused on top2
    SandwichTwo biscuits with a filling, an embossed ring and a name on top2–3
    Thumbprint jamCookie with a round well filled with jam2
    PlainCookie, with an optional name or gingerbread face1–2

    Defaults

    Sizes and why

    PartDefaultWhy
    Cookie70 mm, 7 mm thickClose to a real cookie, and too big for the small-parts cylinder.
    Icing1.4 mm thick, 2.5 mm in from the edgeA few layers: thick enough to read as icing.
    Sprinkles0.7–0.8 mm high, sunk 0.3 mmSunk into the icing so they print fused to it.
    Piping0.9 mm highTwo to five layers at common layer heights.
    Cutter0.8 mm blade, 1.6 mm wall, 4 mm flangeThe same profile as our cookie cutter generator.

    Safety

    Small parts and toy food

    Not for children under 3. US rules (16 CFR 1501) treat any toy part that fits entirely inside a test cylinder 31.7 mm wide and 25.4 to 57.1 mm deep as a small part, banned in toys for children under 3. Pieces that break off in use-and-abuse testing count too.

    • Our estimate: the generator checks each printed piece’s outline and height against that cylinder and warns when one could fit. It is a geometry estimate, not a test or a certification.
    • Sprinkles and chips are printed fused into the surface below them, never as loose bits, but they have not been tested to stay on: a bite or a bend can snap one off.
    • Toy food looks like food. Tell children it is not to be eaten, and keep play cookies apart from real ones.
    • The cutter is the one part meant for real dough. Printed plastic has layer lines that trap food, so wash it by hand, keep it out of the dishwasher (PLA softens around 60 °C) and replace it now and then. We make no food-safe claim. Our cookie cutter generator explains more.

    Printing

    Printing tips

    • No supports: every piece prints flat. The sandwich’s top biscuit overhangs the filling by 1.2 mm, which bridges cleanly.
    • Multicolour: each colour is its own part in the 3MF. On one nozzle, the advice under the preview gives the heights for colour changes.
    • Rounded edges print as fine steps, the way any curve does in layers.
    • Material: PLA is fine for play cookies. For the cutter, PETG is a little tougher.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview. A big set spreads over as many plates as needed; if a tray or plate is too big, lower the cookie size or the count.

    Can I sell sets I print?

    The designs you make are yours. The typefaces are open-licensed, which allows making physical products. Toys for children must meet toy-safety rules where you sell, including small-parts limits and testing, so check those before selling.

    Are these cookies edible?

    No. They are plastic toys for pretend play. Only the cutter is meant to touch food, and only briefly.

    Can I trace my own shape?

    Yes. Choose “Your image” and upload a dark shape on a light background, a PNG with a transparent background, or an SVG. Use only images you have the right to use.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-10. Community posts are one maker's experience, not a specification.

    1. Final rule on small parts (60 FR 10742): test cylinder 1.25 in (31.7 mm) wide, 1 to 2.25 in (25.4 to 57.1 mm) deep US Consumer Product Safety Commission, Federal Register, 27 Feb 1995
    2. 16 CFR 1501.4: size requirements and test procedure Electronic Code of Federal Regulations
    3. Small parts for toys and children’s products US Consumer Product Safety Commission
    4. Food-safe FDM printing Prusa Research
    5. Color change Prusa Research
    6. SIL Open Font License SIL International