Free generator · Runs in your browser

Cake topper generator Your words, on top of the cake.

Make a birthday, age, wedding or monogram cake topper: script or bold letters welded into one piece, hearts, stars, balloons or confetti, stakes or skewer sockets, a second glitter colour and matching cupcake picks.

  • Private by designNothing leaves this device
  • One rigid pieceEvery letter joined
  • No supportsPrints flat
  • Two-colour readyLetters as their own part

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Text

Topper

Press Enter for a second line.

A name or a date in smaller letters.

Main typeface
Small line typeface
35 %

Letter height of the small line, as a share of the main letters.

Small line goes
0.3 mm

Grows thin strokes. Script typefaces need 0.3 mm or more.

Shape

160 mm

The text scales to this width. Measure your cake: most toppers are a little narrower than the top.

Shape
4.0 mm
Join the letters with
3.0 mm

The border around every letter. Wider is stronger and joins letters that sit apart.

5 mm

Fills gaps up to twice this wide between letters and lines, for a smoother shape.

Bare letters standing on a bar, the classic look. Best for one line of joined-up script; loose letters and lines get a small strut.

3.0 mm

3 mm is stiff enough for most toppers up to about 200 mm wide.

1.2 mm

Decoration

Decoration
Place it

Confetti dots go in a band above the text.

80 %

As a share of the main letter height.

Stakes

Into the cake with
How many
70 mm

How far the stakes go into the cake, below the topper’s lowest edge.

8 mm

Points slide into firm icing more easily.

Measure your skewers with calipers: sizes vary between packs.

0.40 mm

Added to the skewer diameter, so it slides in. Lower it for a tighter fit.

15 mm

Colours and picks

The raised letters, decorations and frame line become their own part in the 3MF, for glitter or silk filament.

Make
12
45 mm

Picks use the main line and the decoration; the small line is left off.

40 mm
Preview

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    How to make a 3D printed cake topper

    Type the words, pick a shape and a decoration, and set the width. The generator welds every letter into one rigid piece, adds the stakes, and gives you a file to slice. It prints flat in about an hour or two.

    1. Pick the kind of topper: a word, an age, names with a date, or a monogram.
    2. Choose the typefaces. Script looks festive; raise Thicken letters so thin strokes print.
    3. Set the width to suit your cake, and pick a silhouette or a frame.
    4. Add stakes, or sockets for wooden skewers you already have.
    5. Download and print flat, face up, with no supports.

    Options

    Shapes, joins and stakes

    OptionWhat it doesGood for
    OutlineA border grown around every letter and decoration, so they all joinScript, two lines, loose letters
    Baseline barBare letters standing on a thin barOne line of joined-up script, the classic look
    Arch or circle frameThe text inside an outline-only frame, standing on a shelfMonograms, initials, weddings
    Printed stakesOne to three stakes with pointed tipsMost cakes
    Skewer socketsBlocks at the bottom with a hole sized to your skewerTall or heavy toppers, reusable toppers
    Cupcake picks6–12 small copies on one stake eachCupcakes to match the cake

    Sizes

    Sizes that look right

    A topper usually looks best a little narrower than the cake. Measure the top of your cake and set the width to suit. Thin strokes are the weak spot: keep every stroke at 1.2 mm or more (three lines of a 0.4 mm nozzle), and use the outline for script typefaces.

    UseWidthStakes
    Cupcake pick35–50 mmOne, 30–45 mm
    Small cake100–140 mmOne or two, 50–70 mm
    Large cake150–220 mmTwo or three, 60–90 mm
    Tiered wedding cake150–250 mmTwo or three, or skewer sockets

    Printing

    Printing tips

    • Print flat, face up, with no supports. The skewer sockets have a pointed (teardrop) top, so they print without supports too.
    • Two colours: the raised letters are their own part in the 3MF. On a single-nozzle printer, add a colour change where the raised letters start (the topper thickness).
    • Glitter and silk filaments look festive; a slightly slower outer wall keeps them shiny.
    • Food contact: 3D prints have tiny gaps between layers that are hard to clean, and colours and additives are not made for food. A topper only touches the cake briefly, but wrap the stakes in food wrap or foil, or use a filament sold as food-contact safe and follow its instructions. We make no food-safety claims.
    • Small parts: cupcake picks and loose pieces are small parts: not for children under 3, and remove them before serving.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview to check. A topper prints flat, so it needs a bed a little wider than the topper and as long as the topper with its stakes. Cupcake picks spread over as many plates as needed.

    Can I sell toppers I print?

    The designs you make are yours. The typefaces are open-licensed, which allows making physical products. Don’t use names or logos you have no right to, and don’t claim food safety.

    Is it safe on a cake?

    We can’t say it is. Prints are not food-safe by default. Keep contact short, wrap the stakes, or use a filament sold as food-contact safe and follow its maker’s instructions.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-11. Community posts are one maker's experience, not a specification.

    1. Food safe FDM printing Prusa Research
    2. Layers and perimeters Prusa Research
    3. Color change Prusa Research
    4. SIL Open Font License SIL International