The method
How to make string art with a printed frame
String art is thread pulled tight between pegs. The printed frame gives you every peg in the right place, already numbered, so there are no nails to hammer. The thread order tells you which peg comes next.
- Choose a photo or a pattern. Crop the photo so the subject fills the frame.
- Set the pegs and thread. Watch the thread preview: it shows what the finished piece will look like at the real size.
- Print the frame. It prints flat with no supports.
- Tie on at the start mark and follow the order with the step player, the checklist or the text file. Loop the thread once round each peg.
- Tie off on the last peg and add a drop of glue to the knots.
Photos
How a photo becomes one thread
The generator starts at peg 1 and looks at the straight line to every other peg. It picks the line that crosses the darkest part of the picture that still needs thread, adds it, and starts again from the new peg. A few thousand lines later the dark areas are dense with thread and the light areas are almost empty. This greedy method was made popular by the artist Petros Vrellis in 2016 and studied by Birsak and others in 2018 (see the sources).
- Use strong light and shadow. A face lit from one side on a dark background works well. Flat, pale pictures do not.
- Fill the frame. Small details are lost, so zoom in.
- Size matters. The thread has a real thickness. A 400 mm ring with thin thread shows far more than a 150 mm ring.
Patterns
Patterns from maths
| Pattern | Rule | What you see |
|---|---|---|
| Times table | Peg n joins peg n × multiplier | × 2 gives a heart-like cardioid, × 3 a nephroid, and bigger numbers give more lobes |
| Nested rings | Every peg joins the peg a fixed jump away | A smooth ring; each colour uses a shorter jump for a bigger ring |
| Curved corners | The jump is one side of the shape | Straight lines that look like curves, an idea from Mary Everest Boole’s curve stitching |
| Star | Each tip joins the tip two along (a star polygon), with a band of neighbouring pegs on each edge | A pentagram or other star made of ribbons; each colour is one band of every ribbon |
Every pattern works on the ring, the square and the heart. Each colour is one continuous thread: where the next line starts at a different peg, the order tells you to run the thread along the outside of the pegs to get there.
Options
Frame options
| Setting | What it does | Good start |
|---|---|---|
| Pegs | More pegs draw finer detail but sit closer together | 200 on a 210 mm ring; 240 or more on big rings |
| Lines | The most lines the photo may use | 2,000 to 4,000 |
| Thread thickness | Sets how dark one line is, and the preview | Measure your thread |
| Notched rim or posts | Blocks with a lip, or round posts with a head. Both hold the loops down | Notched rim for many pegs |
| Peg numbers | Engraved or raised every 5 or 10 pegs, with an arrow at peg 1 | Every 10 |
| Backing board | A thin board under the frame in a second colour | On for small frames |
| Split into arcs | Cuts a big ring into arcs that fit the bed | Only if needed |
Pegs are numbered clockwise from the arrow. The readout under the preview shows the peg spacing and the thread you need.
Printing
Printing and winding tips
- No supports. Print the frame flat, pegs up. The lips on the pegs slope at 45°.
- Two colours without a second nozzle: with a backing board, pause at the height shown in the tips and swap filament.
- Arcs: push the dovetail tabs together on a flat table and glue the joints before winding, because the thread pulls inwards.
- Thread: thin, smooth sewing thread works well. Buy more than the readout says to allow for wraps and knots.
- Tension: keep the thread snug but not tight. Many tight lines can bend a thin frame.
- Lost your place? The step player remembers it. On paper, tick each row of ten.
Questions, answered
Is it free to use?
Yes. No account, no watermark, no limits.
Will it fit my printer?
Choose your printer under the preview. Rings bigger than the bed are split into arcs that key together. Squares and hearts print in one piece, so keep them inside your bed.
Is my photo uploaded?
No. The picture is read and worked out in your browser and never leaves your device.
How long does winding take?
It depends on the line count and your pace. Thousands of lines take hours, so the saved place and the checklist matter.
Why does my photo look rough?
The preview is honest about the real thread thickness. Use a bigger frame, thinner thread, more pegs, or a picture with stronger light and shadow.
Can I sell what I make?
The designs you make are yours. Only use photos you have the right to use. We make no claims beyond that.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-13. Community posts are one maker's experience, not a specification.
- A new way to knit (2016) Petros Vrellis
- String Art: Towards Computational Fabrication of String Images Birsak, Rist, Wonka and Musialski, Computer Graphics Forum (2018)
- String art Wikipedia
- Cardioid: as an envelope of chords of a circle Wikipedia
- Star polygon Wikipedia
- 2D distance functions Inigo Quilez