The method
How a text flip works
Each block is where two letters overlap. Letter one of the front word is pushed straight back, letter one of the side word is pushed straight across, and only the solid they share is kept. From the front, that solid has the outline of the first letter; from the side, the outline of the second. Set the blocks in a diagonal row and the whole row reads one word from the front and the other word from the side.
- Type the two words. Same length is best; otherwise slim posts fill the gaps.
- Pick a bold typeface and a letter height.
- Choose square blocks or natural widths, and the spacing.
- Download and print it standing up on its base.
Use the Front and Side buttons above the preview to check each word before you print.
Options
Settings at a glance
| Setting | What it does | Starting point |
|---|---|---|
| Letter widths | Square blocks give every pair the same footprint, so both words are evenly spaced. Natural widths keep each letter’s own width, like ordinary text. | Square blocks |
| Block width | How wide each square block is, as a share of the letter height. | 80% |
| Letter spacing | The gap between letters in each view. Blocks never touch, so the base joins them. | 1.5 mm |
| Stroke weight | Thickens the letters before they are crossed. | 0 mm; 0.2 to 0.4 mm for lighter typefaces |
| Posts | Stand in where the shorter word has no letter. | At both ends |
| Base | A rounded plate around the row that holds every block. | 3 mm thick, 4 mm border |
Printing
Printing tips
- Orientation: print it as it comes, standing on its base. The base holds it on the bed, so no brim is needed.
- Supports: letters with flat arms that stick out over air, such as E, F, T, Z, 4, 5 and 7, need supports. Tree or organic supports snap off cleanly. Let them start on the model, because they stand on the base. The studio lists the letters that need them.
- No supports: words made of letters such as A, H, I, M, N, O, U, V, W, X and Y usually print without any, because their undersides are short bridges or steep slopes.
- Two colours on one nozzle: add a colour change at the base thickness, where the letters begin.
- Detail: 0.12 to 0.16 mm layers and three walls keep letter edges crisp.
Questions, answered
Is it free to use?
Yes. No account, no watermark, no limits. Everything is built on your device.
Will it fit my printer?
Choose your printer below the preview. The row runs diagonally, which uses the bed’s longest direction. If it is still too big, lower the letter height or the block width.
Can the two words be different lengths?
Yes. Every block needs a letter from each word, so where the shorter word runs out, a slim post stands in. It shows as a thin bar in that view. Words of the same length look best.
Can each word have its own colour?
No. Each block is both letters at once, so there is no part that belongs to only one word. The base can take its own colour.
Can I sell pieces I print?
The designs you make are yours. The typefaces are open-licensed, which allows making physical products. Names and words you print are your responsibility.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-10. Community posts are one maker's experience, not a specification.
- Text flips: how to design and 3D print your own 3DWithUs
- Organic supports Prusa Research
- Color change Prusa Research
- SIL Open Font License SIL International