The method
Bases for your miniatures
Pick a common size or enter your own, add a magnet pocket and a texture, and print a batch. Bases taper slightly from bottom to top, like the moulded bases they replace.
Reference
Common base sizes
| Nominal | Measured bottom × top | Height |
|---|---|---|
| 25 mm round | 25 × 23.8 mm | 3.5 mm |
| 32 mm round | 31.6 × 29.4 mm | 4.0 mm |
| 40 mm round | 39.6 × 38.6 mm | 4.0 mm |
| 50 mm round | 49 × 47.3 mm | 4.2 mm |
| 60 mm round | 63.6 × 62.4 mm | 4.2 mm |
| 80 mm round | 79.1 × 77.4 mm | 5.0 mm |
Measured commercial bases differ a little from their nominal size. Ovals in common use include 60 × 35, 75 × 42, 90 × 52, 105 × 70, 120 × 92 and 170 × 105 mm (some sets use 170 × 109 mm).
Magnets
Choosing magnets
| Base | Suggested magnet |
|---|---|
| 25–28 mm | 5 × 2 mm (or 4 × 2) |
| 32 mm | 5 × 2 mm |
| 40–50 mm | 8 × 2 mm |
| 60 mm and up | 8 × 2 mm, or 10 × 2 mm |
Pockets are made 0.3 mm wider and deeper than the magnet so it presses in with a drop of glue.
Questions, answered
Are these official bases?
No. They are generic bases in common sizes. Check your game’s rules for the size each model needs.
FDM or resin?
Both work. Resin prints the textures crisper; FDM is faster for smooth bases.
Can I print a batch?
Yes: download once and duplicate the base in your slicer to fill the plate.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-07. Community posts are one maker's experience, not a specification.
- Basing guidelines: base size guide Hobby Heaven
- Magnet size guide for tabletop bases first4magnets