The method
Make a personalised ornament in four steps
Pick a shape and a variation, type a name and the generator fits the letters inside the outline, blends a hanging loop into the top and adds the shape’s own details in a second colour. Everything runs in your browser.
- Choose a shape and variation. Thirteen shapes, from baubles to gingerbread houses.
- Type the names. One per line makes a whole family’s ornaments on one plate. Add the year as a second line.
- Pick a style and pattern. Raised details work on any printer with one colour change; flush inlay needs a multi-material printer.
- Download and print. The page gives you the exact colour-change height.
Shapes
Shapes and variations
| Shape | Variations | Notes |
|---|---|---|
| Bauble | Round, Oval, Finial | The roomiest shape for a name and year. |
| Star | Five-point, Six-point, Eight-point, Rounded | Short names and initials. |
| Tree | Tiered, Simple, Layered, Star topper, Family tree | The name sits across the bottom tier. The family tree holds up to 8 names. |
| Heart | Classic, Slim, Double | First Christmas, couples and pets. |
| Snowflake | Classic, Crystal, Fern, Star, Draw your own | Change the pattern number for a new flake, or draw your own arm; a name goes in the centre. |
| Bell | Classic, Jingle bell, Double bells | Jingle bells carry a slot; double bells share a bow. |
| Candy cane | Cane, Heart | Striped in the second colour. No name. |
| Stocking | Classic, Elf, Fluffy cuff | The name is cut out of the cuff. |
| Mitten | Classic, Heart | The name is cut out of the cuff. |
| Gingerbread | Man, Girl, House, Santa hat | Icing in the second colour; the house has a door and windows, and Santa wears a hat. |
| Snowman | Top hat, Beanie, Two snowballs | The name sits on the bottom snowball. |
| Gift | Square, Tall, Hat box | A ribbon and bow; the name crosses the ribbon. |
| Wreath | Leafy, Berries, Heart | The name sits on a banner across the bottom. |
Lettering
Names that print crisply
- Letter size: 6 mm or taller prints cleanly on a 0.4 mm nozzle; the second line should stay above 4 mm.
- Typeface: rounded and bold faces read best on small ornaments. Scripts look lovely on baubles and hearts with a little thickening.
- Thickening: it is capped on small lines, so the holes in letters like a, e and 0 stay open.
- Long names: they shrink to fit. A condensed typeface or a larger ornament keeps them big.
Two colours
Two colours on a single-nozzle printer
For raised details, the ornament is one colour up to its top surface and the name and details are everything above it. Add a filament change at the height shown under Colours in the readout (in most slicers, right-click the layer slider and add a colour change or pause). The printer stops, you swap filament and the details print in the second colour.
On stockings, mittens and gifts the name is cut out of the cuff or ribbon, so it shows in the ornament colour. Multi-material printers can print flush inlays directly: open the 3MF and assign a filament to each part.
Hanging
Loops that last the season
- Hole size: 4 mm takes ribbon, cotton thread or a wire ornament hook; go to 5–6 mm for thick ribbon.
- Loop wall: about 2 mm of plastic around the hole holds up to handling; thinner loops can snap when the ornament is packed away.
- Thickness: 3 mm is light enough for a branch and stiff enough not to bend. Large ornaments over 100 mm are sturdier at 3.5–4 mm.
- Material: PLA is fine indoors. PETG is less brittle if ornaments get dropped or posted.
Questions, answered
Is it free to use?
Yes. No account, no watermark and no limits. Names never leave your device.
Can I sell ornaments I make with it?
Yes. The designs are yours, and all eight typefaces are open-licensed (SIL Open Font License or Apache 2.0), which allows using them to make physical products, including ones you sell.
Why did my name get smaller?
The generator keeps every letter inside the shape with a margin from the rim. Long names are scaled down to fit; the readout shows the final letter height.
Do I need supports?
No. Ornaments print flat, face up, with no overhangs.
Should I download STL or 3MF?
3MF keeps the ornament and its details as two coloured parts of one object, ideal for multi-material printers. STL combines everything; the per-colour option gives one STL per colour.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-09. Community posts are one maker's experience, not a specification.
- Color change Prusa Research
- Multicolor printing with a Prusa: beginner’s guide Prusa Research
- View slicing information (pauses and filament changes) Bambu Lab
- SIL Open Font License SIL International
- Google Fonts: open-source fonts used here Google
- 2D distance functions (heart, polygon and segment) Inigo Quilez