The method
See exactly what your printer will do
G-code is the list of moves your slicer writes for the printer. This viewer reads every move in the browser, groups them into layers and features using the slicer’s own comments, and draws the extruded paths in 3D. Drag the layer slider to watch the print build up.
- Open the file. Plain G-code from any FDM slicer, or a sliced Bambu .gcode.3mf.
- Check the summary: time, filament, temperatures and how much of the time is spent travelling.
- Add changes at a layer if you need them, then download the edited file.
Estimates
Where the print time comes from
Slicers simulate acceleration and write their estimate into the file. When that comment is there, the viewer shows it and shares it out across the layers in proportion to their moves. When it isn’t, the viewer adds up each move’s distance divided by its speed. That ignores acceleration, so it is a minimum: real prints usually take longer.
Editing
Inserting a pause or filament change
Each change goes in just before the chosen layer starts, with a comment so you can find it. The command depends on your printer’s firmware:
| Firmware | Filament change | Pause | Notes |
|---|---|---|---|
| Marlin | M600 | M0 | M600 needs ADVANCED_PAUSE_FEATURE and an LCD. M0 waits for a click. |
| Prusa (MK3, MK4, MINI, XL, CORE One) | M600 | M601 | The same commands PrusaSlicer inserts from its layer slider. |
| Klipper | PAUSE | PAUSE | Needs the [pause_resume] section. M600 works only if you have a macro for it. |
- Temperatures use M104 (nozzle) and M140 (bed), which don’t wait. Fan uses M106 with S from 0 to 255. Speed uses M220, as a percentage.
- Test on a small print first. Firmware settings vary, and a pause your printer doesn’t support is ignored.
- Bambu Lab printers check the files they receive; use Bambu Studio’s own Add pause on its layer slider.
Colours
What the colours mean
| Feature | Colour | Slicer labels |
|---|---|---|
| Outer wall | #F2B33D | External perimeter, Outer wall, WALL-OUTER |
| Inner wall | #E2574C | Perimeter, Inner wall, WALL-INNER |
| Infill | #8B5CF6 | Internal infill, Sparse infill, FILL |
| Top and bottom | #2F6FED | Solid infill, Top surface, SKIN |
| Bridge | #4BB7C9 | Bridge infill, Bridge |
| Support | #3FA672 | Support material, SUPPORT |
| Skirt and brim | #9AA3B5 | Skirt, Brim, SKIRT |
| Other | #D9D6CF | Anything else |
Questions, answered
Is my file uploaded?
No. The file is read and edited in your browser.
Can it open Prusa binary G-code (.bgcode)?
Not yet. Export plain G-code from PrusaSlicer by turning off binary G-code in the printer settings.
Why doesn’t my file show colours for each feature?
The colours come from the slicer’s comments. Files without them, such as some older or post-processed files, show everything as one colour.
Is the edited file safe to print?
The viewer only adds the lines you choose, with a comment above each. Check them in the preview text, and try a small test first.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-07. Community posts are one maker's experience, not a specification.
- M600 – Filament Change Marlin
- M0–M1 – Unconditional stop Marlin
- Insert pause or custom G-code at layer Prusa Research
- G-Codes (PAUSE and RESUME) Klipper