Free generator · Runs in your browser

Cheer bell and cowbell generator Ring it for the team.

Make a team hand bell, a cowbell or a rattle ring with a clapper printed in place, your team name, number and year wrapped round it, stripes in team colours, and a batch with one bell for every player.

  • Private by designNothing leaves this device
  • Three noisemakersHand bells, cowbells, rattles
  • No supportsEvery inside at 45° or less
  • Ready to sliceEvery colour its own part

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Bell

Make
Profile

Classic narrows to a waist; tulip flares wide at the mouth; straight is a plain cone.

64 mm
56 mm

Without the handle.

2.2 mm

The wall grows thicker near the crown so the inside never leans in more than 45°.

Handle
42 mm
Cowbell
60 mm
40 mm
80 mm
2.6 mm

Thicker walls survive drumsticks better.

28 mm
10.0 mm

Measure the rod or bolt on your mount. Printed holes come out a little small, so add about 0.2–0.4 mm.

90 mm
56 mm

Measure across your hand at the knuckles and add a little.

16 mm
12

Or set 0 and fill the chamber with dry rice or plastic beads.

5.0 mm
0.20 mm

The gap round the lid where it drops into the ring. Glue seals it.

Clapper

Clapper

Printed in place, the clapper stands inside the bell on the bed, its loop round a bar in the crown. If it fuses on your printer, raise the clearance or choose the hook-on clapper, which prints flat beside the bell.

0.70 mm

The gap between the clapper’s loop and the bar, and round the loop. Our tolerance test finds your printer’s number.

A cowbell for drumsticks has no clapper.

The rattle ring has beads instead of a clapper. Set them in the first step.

Text

Each line makes one bell: the name replaces the team name, and text after a | replaces the number, as in Ava | #7.

Make several of every item, such as spares or a whole plate of one name.

Check every name

    One per line, up to 40. Add | for a second line, and an order number in square brackets to name each object without printing it: [1042] Olivia | Class 3. Pick your printer below the preview to fill its plates.

    Text is
    Typeface
    0.8 mm

    Colours

    Stripes
    3.0 mm

    Download

    Building the preview…

    Print it well

      Everything is built on this device. Nothing you type or upload is sent anywhere.

      Advertisement

      The method

      How to make a team bell

      Choose a hand bell, a cowbell or a rattle ring, type your team name, number and year, and the generator builds every part ready to print. The text wraps round the bell, and the clapper prints inside it.

      1. Choose the bell and its size.
      2. Pick a clapper: printed in place, or a separate one that hooks on.
      3. Add your text, or paste a list of names for the whole team.
      4. Download and print. The bell, text, stripes, handle and clapper are each their own part, so each can take its own filament.
      5. Free the clapper: after printing, shake the bell or nudge the clapper with a finger until it swings.

      Options

      What each bell is made of

      BellPartsPrintsNotes
      Hand bellBell with a bar in the crown, clapper, handle, text, stripesMouth down, no supportsThe bar is a short bridge across the crown
      CowbellCowbell with a bar, clapper, loop handle, text, stripesMouth down, no supportsThe inside closes in a 45° roof
      Drumstick cowbellCowbell, mounting tab, text, stripesMouth down, no supportsThe tab’s hole has a pointed top so it prints cleanly
      Rattle ringRing with a bead chamber, lid, beads, textFlatFill with beads, then glue the lid in

      Printing

      Printing tips

      • Overhangs: the inside of every bell leans in no more than 45°, which most printers manage without supports.
      • Clapper: it stands on the bed inside the bell, so the bell’s first layer must hold it well. A brim on the clapper can help. If it fuses to the bar, raise the clearance.
      • Two colours: the raised text and stripes are their own parts. Give them their own filament on a multi-colour printer, or choose engraved text for one colour.
      • Sound: printed plastic damps vibration more than metal, so expect a softer, shorter ring than a metal bell. A thinner wall or a different filament may ring louder; print a small one and test.

      Questions, answered

      Is it free to use?

      Yes. No account, no watermark, no limits.

      Will it fit my printer?

      Choose your printer below the preview. A batch spreads over as many plates as it needs, and the download comes with a file per plate.

      Can I sell bells I print?

      The designs you make are yours. The typefaces are open-licensed, which allows making physical products. Do not add team names or logos you don’t have the right to use. Clappers and beads are small parts: not for children under 3.

      Will it be as loud as a metal bell?

      No. Plastic damps vibration, so a printed bell rings softer and shorter than a metal one. Be kind to the people near you: ring away from ears, and check the venue’s rules, as some ban noisemakers.

      Sources

      Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.

      1. Model optimization and performance evaluation of hand cranked music box base structure manufactured via 3D printing Heliyon (2021)
      2. What causes noise-induced hearing loss US Centers for Disease Control and Prevention
      3. The 45-degree rule in 3D printing Snapmaker
      4. Support material: overhang threshold Prusa Research
      5. Small parts for toys and children’s products US Consumer Product Safety Commission
      6. SIL Open Font License SIL International