Free generator · Runs in your browser

Math manipulatives generator A classroom kit, printed.

Print fraction circles and bars with trays, base-ten blocks, geometric solids with folding nets, and number tiles, with raised labels and braille for low-vision learners, for one student or a whole class.

  • Private by designNothing leaves this device
  • Five kitsFractions, blocks, solids, tiles
  • Tactile labelsRaised print and braille
  • Class setsPlates grouped by colour

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Kit

Kit
100 mm

Classroom fraction circles are often about 10 cm across. Bigger circles leave room for braille on more pieces.

180 mm

Every bar is an exact share of this length, less a 0.2 mm fitting gap.

20 mm
12

Pieces from the whole down to this fraction, such as 12 for twelfths.

Circles get one round recess each; bars sit in rows as a fraction wall. Trays split to fit your bed.

4.0 mm
10 mm

Classroom sets use 1 cm units, so a rod is 10 cm long and a flat is 10 × 10 cm.

Grid-lined walls over an empty middle with a pointed ceiling, so it needs no supports inside.

2.4 mm
Solids
40 mm

The cube’s edge. Every solid stands about this tall; the guide lists each one’s sizes.

Nets

Nets are the flat-faced solids unfolded, with thin living hinges that fold up. The cylinder, cone and sphere have no flat net.

1.6 mm
0.40 mm

Two layers at 0.2 mm bend well in PETG; PLA hinges may crack after many folds.

30 mm

A raised line with a tick on each tile, so tiles laid side by side make a number line.

Labels

Base-ten blocks carry their grid lines and solids stay plain, so this kit has no labels.

In Atkinson Hyperlegible, a typeface designed for low-vision readers.

8.0 mm

Labels shrink to fit narrow pieces, down to 4 mm.

Uncontracted (Grade 1) Unified English Braille, as in the braille label generator. Fractions use the numeric fraction line.

Braille dots
0.8 mm

Class set

1

Copies of the whole kit, packed onto plates. Pick your printer below the preview to fill its bed. Up to 1,500 pieces per download.

0.4 mm

Room around each circle or row in the tray.

Colours

Colours
Tile colours
Preview

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    How to print a maths kit for a class

    Pick a kit, set its size, and the generator builds every piece with raised labels and braille where they fit, then packs one kit, or a kit for every student, onto your printer’s plates, grouped by colour.

    1. Pick the kit: fraction circles, fraction bars, base-ten blocks, geometric solids or number tiles.
    2. Set the size and which pieces to include.
    3. Choose labels: raised print, braille, or both.
    4. Set the class size and pick your printer so the plates fill its bed.
    5. Download and print. Each piece is its own object, so every colour can go on its own plate.

    For teaching time, the wall clock generator makes a clock face with numerals and hands.

    Sizes

    What is in each kit

    KitPiecesSizes
    Fraction circlesThe whole and 1/2 to 1/12: 78 piecesDiameter 60–160 mm; pieces 0.3 mm apart so a full circle drops into its recess
    Fraction bars1 whole and 1/2 to 1/12: 78 barsEach bar is exactly the whole divided by its denominator, less a 0.2 mm gap
    Base-ten blocksUnit, rod (10), flat (100), thousand cube (1000)Unit 1 cm by default: rod 10 × 1 × 1 cm, flat 10 × 10 × 1 cm, cube 10 × 10 × 10 cm
    Geometric solidsCube, cuboid, cylinder, cone, sphere, square pyramid, triangular prism, tetrahedron, octahedron, dodecahedron, icosahedronSize S is the cube’s edge; cuboid 1.5S × 0.75S × S; cylinder 0.8S across, S tall; cone and sphere S across; pyramid base S, S tall; prism side S, 1.2S long; the other four stand S tall
    Number tiles0 to 20 (any range up to 99)Tile width 24–50 mm, 1.2 times as tall

    Tactile labels

    Raised print and braille

    Labels use Atkinson Hyperlegible, a typeface made for low-vision readers, raised 0.8 mm. Braille is Grade 1 (uncontracted) Unified English Braille with domed dots in the same sizes as the braille label generator. A fraction such as 1/4 is written with the numeric indicator, the 1, the fraction line (dots 3-4) and the 4.

    Each label grows as large as the piece allows, side by side with its braille or above it. Braille needs about 30 mm for 1/12, so narrow pieces get print only, and the advice lists which. Larger circles or longer bars leave room for braille on more pieces.

    Not a compliance claim. These are Grade 1 labels for learning and home use, not accessible-signage or curriculum standards. Ask a braille reader or a teacher of students with visual impairments to check the pieces before you rely on them.

    Printing

    Printing tips

    • Two colours on one nozzle: every piece in a kit is the same thickness, so a colour change at that height gives dark labels and braille on bright pieces.
    • Fine layers (0.12–0.16 mm) make rounder braille dots and crisper numerals.
    • No supports: pieces, trays, blocks and nets print flat. The sphere prints as two halves to glue. The icosahedron’s lowest faces lean out about 48°, which most printers manage.
    • Nets: print with the hinges on the bed, fold the faces up, and close the last seams with tape or a drop of glue.
    • Wash pieces in warm soapy water; hot water and dishwashers can warp PLA.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview. Pieces and trays are packed onto as many plates as needed; a tray that is too big splits into smaller trays. If one piece is still too big, make the kit smaller.

    Can I sell kits I print?

    The designs you make are yours, and these are traditional teaching shapes anyone may make. The typeface is open-licensed, which allows making physical products. Kits are small parts, so check toy-safety rules before selling for children.

    Are the braille labels ADA compliant?

    No claim is made. The labels are uncontracted braille for learning, not signage. Ask a braille reader to check them.

    Are they safe for young children?

    Unit cubes, small fraction pieces and tiles are small parts: not for children under 3. Supervise younger learners.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.

    1. Base-10 blocks (cube 1 cm, long 10 × 1 × 1 cm, flat 10 × 10 × 1 cm, big cube 10 cm) Everyday Mathematics, University of Chicago
    2. Table of UEB mathematical signs (simple numeric fraction line, dots 3-4) UK Association for Accessible Formats
    3. Basic braille, numbers: fractions, dollars, time Hadley
    4. Size and spacing of braille characters Braille Authority of North America
    5. 2010 ADA Standards, 703.3 Braille US Access Board
    6. Dodecahedron (inradius and volume) Wolfram MathWorld
    7. Icosahedron (inradius and volume) Wolfram MathWorld
    8. 16 CFR Part 1501: small parts for children under 3 eCFR, US Government
    9. Color change Prusa Research
    10. Atkinson Hyperlegible Braille Institute