The method
How to make a set of swatches
A swatch is a small card printed in the filament itself, so you can see the real colour, finish and translucency before you choose a spool. This generator engraves each card with its colour, brand, filament and a note, adds a strip of thickness steps, and lays a whole batch out on your printer’s plates.
- Pick the filaments: choose a brand and filament, then one colour or all of them, or type your own lines.
- Add a note such as the temperatures from the spool label.
- Pick your printer below the preview to fill its plates.
- Download the 3MF: every swatch is its own object, named after its colour, so you can give each its filament.
The list
Writing swatch lines
| Line | Prints |
|---|---|
Galaxy Black | Just the colour name |
Polymaker | Panchroma Basic PLA | Lemon Yellow | Colour, brand and filament |
Polymaker | Panchroma Basic PLA | Lemon Yellow | #EED230 | 215 °C | All of it, with the exact preview colour |
[A12] Sunlu | PLA+ | Grey | An order or shelf ID names the object without printing it |
The hex code only colours the preview and the 3MF. Where a maker doesn’t publish one, the preview guesses from the colour name, so check it against the real spool.
Steps
Reading the thickness steps
The strip along the bottom runs from the thinnest step on the left to the thickest on the right. Hold the swatch up to a light: the step where light stops coming through tells you how thick a wall must be to hide what’s behind it, which matters for lamp shades, lithophanes and colour layering. Set the steps to multiples of your layer height, such as 0.2 or 0.4 mm.
Printing
Printing a batch
- One filament per swatch: on a multi-material printer, assign each object its filament. On one nozzle, print each swatch on its own, or the batch one plate per filament.
- Text: engraved letters print in the same filament, so there’s nothing to change mid-print.
- First layer: the thin steps need a clean first layer. Print the swatches flat as laid out.
- Storing them: thread them on a ring through the hole, or make a stand with the holder grid using a custom slot a little bigger than the card.
Questions, answered
Is it free to use?
Yes. No account, no watermark, no limits.
Where do the colours come from?
From the filament makers’ own store listings, which we check for our materials pages. The list covers seven brands and isn’t every filament on sale; type a line for anything missing.
Why aren’t temperatures filled in?
Makers give different ranges for each filament and printer, and we haven’t checked them for every line, so we don’t guess. Copy them from the spool label into the note.
Can I print a batch on a single-nozzle printer?
Yes. Pick one filament’s swatches from the list, print them, then swap the spool and print the next ones, or print one swatch per spool as you open it.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-09. Community posts are one maker's experience, not a specification.