Free generator · Runs in your browser

Braille label generator Labels you can feel.

Type a label and get a 3D printable braille plate with smooth domed dots, translated to Unified English Braille, with raised print text above.

  • Private by designText stays on this device
  • UEB Grade 1Capitals, numbers, punctuation
  • Sized to standardsADA sign or NLS paper dots
  • Ready to sliceSTL and two-colour 3MF

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Text

Up to six lines. Letters, numbers and . , ? ! - ' are supported.

8.0 mm

Dots

Dot standard
1.55 mm
0.75 mm
2.40 mm
6.60 mm
10.10 mm

Plate

6.0 mm
2.4 mm
3.0 mm
Mounting
Ring position
0.0 cells

0 keeps your own line breaks only.

Colours

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    Make a braille label

    Type the label text. It is translated to Unified English Braille (Grade 1, uncontracted) on your device, and each dot is built as a smooth dome on a plate, with optional raised print text for sighted readers.

    Not for ADA signage. The 2010 ADA Standards require contracted (Grade 2) braille on signs. These Grade 1 labels are for personal, household and learning use. Ask a braille reader to check labels that matter.

    Dimensions

    Braille dot dimensions

    DimensionADA signs (range)NLS paper brailleSign preset
    Dot base diameter1.5–1.6 mm1.44 mm1.55 mm
    Dot height0.6–0.9 mm0.48 mm0.75 mm
    Dot spacing in a cell2.3–2.5 mm2.34 mm2.4 mm
    Cell to cell6.1–7.6 mm6.2 mm6.6 mm
    Line to line10.0–10.2 mm10.16 mm10.1 mm

    Signs use larger, taller dots than paper braille. Dots are domed or rounded, never flat-topped.

    Translation

    How the text is translated

    • Letters follow the standard UEB alphabet.
    • Capitals get the capital sign (dot 6); a word in capitals gets two.
    • Numbers start with the number sign (dots 3-4-5-6) followed by the letters a–j.
    • A letter a–j straight after a number gets the Grade 1 indicator (dots 5-6) so it is not read as a digit.
    • Contractions are not used (that is what Grade 1 means), so every letter is spelled out.

    Printing

    Printing crisp, comfortable dots

    • Fine layers: 0.08–0.12 mm make round domes rather than stepped bumps.
    • Dots up, plate flat on the bed, no supports.
    • Small nozzle: a 0.25–0.4 mm nozzle resolves a 1.5 mm dome; FDM domes are always approximate.
    • Contrast helps partially sighted readers: light dots on a dark plate or the reverse.

    Questions, answered

    Can I use these labels on public signs?

    Not as ADA-compliant signs: the ADA requires contracted (Grade 2) braille and also regulates mounting and print characters. These labels are for personal and learning use.

    Which characters are supported?

    Letters, digits, spaces and the punctuation marks . , ? ! - and '. Anything else is left out and listed in the advice.

    Is printed braille readable?

    Usually, if dots are tall enough and smooth. Print with fine layers and ask a braille reader to check it.

    Why is there print text too?

    Labels are often shared with sighted people. The ADA places braille below the print text, so the generator does the same.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-07. Community posts are one maker's experience, not a specification.

    1. 2010 ADA Standards, 703.3 Braille US Access Board
    2. Guide to the ADA Standards, Chapter 7: Signs US Access Board
    3. Specification 800: Braille books and pamphlets Library of Congress, NLS
    4. Size and spacing of braille characters Braille Authority of North America
    5. Reading uncontracted braille (UEB) CNIB / INCA
    6. The ABCs of UEB Braille Authority of North America