Free generator · Runs in your browser

Jigsaw puzzle generator Your photo, in pieces.

Make a classic interlocking jigsaw from your photo: pieces cut with smooth tabs, the picture printed on top in filament colours, a tray and a lid. Or engrave numbers under plain pieces, or make a chunky toddler puzzle with knobs.

  • Private by designPhotos stay on this device
  • Picture on top2–6 filament colours
  • Shuffle the shapesClassic, wavy or straight
  • Ready to sliceEvery piece its own object

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Picture

On top of the pieces
4

The photo is grouped into this many colours, one filament each.

Lines
0.6 mm

For a light drawing on a dark background.

Piece colours

Mirrored, so it reads with the piece turned over. Handy for sorting a big puzzle.

Size and pieces

Size

Pick your printer below the preview. The puzzle grows to the biggest that fits its bed, with room for the tray.

200 mm
150 mm

The height follows the picture, so nothing is cropped.

Outline
Pieces
24

The grid is picked so pieces come out close to square.

6
4

A peg that small hands can grab.

12 mm
10 mm

Piece shapes

Cut
20 %

How far tabs reach, as a share of the piece.

40 %

0 makes every piece alike; higher makes each one different.

0.20 mm

Clearance between pieces, split evenly between them. 0.15–0.25 mm suits most printers with a 0.4 mm nozzle; run the tolerance test to find yours. Toddler puzzles want 0.4 mm or more.

The same seed and settings always cut the same pieces.

A small heart or star cut from the middle of a piece.

1

Thickness and tray

4.0 mm

Kids mode uses at least 6 mm.

The colour layer and line heights are whole layers of this.

3 layers

A frame with a recess the size of the puzzle plus the clearance.

0.6 mm
Print the pieces

Colours

Preview

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    Shortcuts

    Start from your kind of project

    The same studio opens ready for each of these: Photo puzzle maker.

    The method

    How to make a photo jigsaw puzzle

    Pick a size and a piece count, and the generator draws the cuts: every cut is one smooth curve shared by the two pieces beside it, and each piece takes it moved half the cut gap towards itself. Your photo is grouped into a few filament colours and becomes a thin layer on top of every piece, split exactly along the cuts.

    1. Add a photo or choose a sample. Bold pictures with big areas of colour read best.
    2. Set the size and pieces: a target count, or columns × rows.
    3. Shape the pieces: tab size, jitter and the cut gap. Shuffle the seed for new shapes.
    4. Add a tray and lid if you want, then download and print.

    Options

    Cuts and pictures

    OptionWhat you getPrinter
    Classic tabsInterlocking pieces that hold togetherAny
    WavySmooth wavy edges, no tabs; easier for young childrenAny
    Straight gridSquare tiles, a sliding-free picture puzzleAny
    Photo in colourA 2–6 colour layer on top of every pieceMulti-material (AMS, MMU, tool changer)
    Line artRaised lines (a colour change gives two colours) or engraved linesAny
    Plain with numbersNumbers engraved underneath, for sortingAny

    Sizes

    Pieces and sizes

    PuzzlePiecesPiece size
    150 × 100 mm6 (3 × 2)50 mm, a toddler puzzle
    200 × 150 mm24 (6 × 4)33 mm
    250 × 250 mm100 (10 × 10)25 mm
    300 × 200 mm150 (15 × 10)20 mm

    Pieces under about 20 mm get fiddly to print and to hold. The tray adds 6 mm of wall all round, plus the clearance.

    Printing

    Printing tips

    • Cut gap: start at 0.2 mm. If pieces are tight, raise it by 0.05 mm; the tolerance test finds your printer’s number.
    • Printing assembled: pieces are kept apart only by the gap, so the first layer matters. Turn on elephant’s foot compensation (about 0.2 mm on a 0.4 mm nozzle) and keep the bed clean and level.
    • Colour layer: slice at the layer height you chose, so the picture is whole layers. Each colour is its own part; give each its filament.
    • One nozzle: use line art with raised lines and add a colour change where the lines start.
    • Kids: print knobbed pieces with 100% infill or five walls, in PLA or PETG.

    Safety

    Small parts

    Puzzle pieces are small parts. US rules ban small parts in toys for children under 3 (16 CFR 1501): a part is small if it fits inside a test cylinder 31.8 mm across, 25.4–57.1 mm deep. Kids mode measures each piece against that cylinder (longer than 65.4 mm, or wider than 31.8 mm every way, with a margin) and says if any could fit. That is a design check, not a safety test.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits, and your photo never leaves this device.

    Will it fit my printer?

    Choose your printer below the preview, or pick Fill my printer to make the biggest puzzle that fits. Printed assembled, the puzzle is one block; spread on plates, pieces fill as many plates as needed, one file per plate.

    Can I sell puzzles I print?

    The puzzles you make are yours. The photo is the part to check: only use pictures you took, bought a licence for, or have permission to use. Toys for children sold in the US need third-party testing and a Children’s Product Certificate, so check the rules before you sell.

    Do I need a multi-colour printer?

    For the photo in colour, yes: the colours share the same layers. On one nozzle, use line art with raised lines and a colour change, or plain pieces.

    The pieces are too tight. What now?

    Raise the Cut gap by 0.05 mm and reprint, and check elephant’s foot compensation in your slicer. Printing the pieces spread on plates also avoids fused bottom edges.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.

    1. Elephant foot compensation Prusa Research
    2. Multicolor printing with a Prusa: beginner’s guide Prusa Research
    3. Color change Prusa Research
    4. 16 CFR Part 1501: method for identifying toys and other articles intended for use by children under 3 years of age which present choking, aspiration, or ingestion hazards because of small parts eCFR
    5. Small Parts Ban and Choking Hazard Labeling U.S. Consumer Product Safety Commission
    6. Children’s Product Certificate U.S. Consumer Product Safety Commission