The method
OBJ to STL in three steps
- Open the OBJ. Each object or group in the file becomes a part. Faces with four or more corners are split into triangles.
- Set the file units. OBJ doesn’t store units, and Blender exports in metres by default.
- Download STL, or a 3MF that keeps each object as a named part.
Trade-offs
What doesn’t carry over
OBJ files often come with an MTL file of materials and texture images. STL has no colour or texture, so only the shape is kept. Vertex normals and texture coordinates are not needed for printing and are dropped.
Units
Why a model comes in at the wrong size
STL and OBJ files store bare numbers with no unit. Slicers assume millimetres, so a model made in inches arrives 25.4 times too small, and one exported from Blender in metres arrives 1,000 times too small. 3MF states its unit (micron, millimetre, centimetre, inch, foot or metre), and this tool reads it.
| Made in | Set “File units” to | Size change |
|---|---|---|
| Inches (many US CAD exports) | Inches | × 25.4 |
| Centimetres | Centimetres | × 10 |
| Metres (Blender’s default) | Metres | × 1,000 |
Mesh check
What the checks mean
- Watertight: every edge is shared by exactly two triangles facing the same way. Slicers need this to know what is inside the part.
- Open edges are holes in the surface; non-manifold edges are shared by three or more triangles; flipped faces point inward. Most slicers repair small problems on import, but a clean mesh slices predictably.
- Separate bodies are pieces that don’t touch. Several bodies in one STL is normal for print-in-place parts and plates of parts.
- Overhang area is surface facing down at more than 45° from vertical, not counting the face on the bed. It’s a rough guide to where supports may be needed.
Questions, answered
My model is tiny after converting. Why?
The OBJ was probably made in metres or centimetres. Set “File units” to match and download again.
Are textures kept?
No. STL stores shape only. Download a 3MF to keep each object as a separate, coloured part.
Is my file uploaded?
No. It is converted in your browser.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-07. Community posts are one maker's experience, not a specification.
- Wavefront OBJ File Format Library of Congress
- STL (STereoLithography) File Format Family Library of Congress
- 3MF Core Specification 3MF Consortium