Free generator · Runs in your browser

Christmas village house generator Your name on the high street.

Make a snowy cottage, a bakery with your family name over the door, a chapel with a steeple or a whole street, with lit windows, a pocket for a battery tea light and base tiles that join together.

  • Private by designNothing leaves this device
  • Nine buildingsOr a whole street
  • Lit from insideTea-light pocket or string
  • Ready to slicePacked plate by plate

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Building

Make
Building
52 mm

For the lighthouse, the width across its foot.

48 mm

Front to back. A tea light needs about 46 mm or more inside.

1

Each storey is 26 mm tall.

45 °

Up to 45°, so the roof halves print flat without supports.

A family name or a shop name. Type / to start a second line, such as The Smith Family / Bakery. Leave empty for no sign.

Shown on a little plaque on the door. Leave empty for none.

Write type | sign | number on each line, up to 8 buildings. Types: cottage, townhouse, shop, chapel, bakery, toy shop, station, barn, lighthouse. Each uses its own usual size.

Not on the chapel or the lighthouse.

Its own white part, with drips along the eaves.

Windows and light

Windows
0.6 mm

Thin panels printed flat in white or natural filament, so the light glows through.

Light

Battery tea lights only, never a real flame. Sizes vary between makes, so measure yours: wax tea lights are commonly about 38 mm across and 16 mm tall.

The body, without the bulb. It sets how deep the pocket is.

0.5 mm

Added all round, so the light drops in and lifts out.

Measure the widest part of the wire. The channel adds 0.6 mm.

Base and village

Holds the light, the trees and lamp posts, and joins the next tile with a peg.

Raised letters on the front of the tile; on the first tile of a street.

Typeface

Colours

Preview

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    How to make a Christmas village house

    Pick a building, size it, give it a sign and a house number, and the generator builds the walls, a snowy roof, window frames, glass and a base tile with a pocket for a battery tea light, then lays every piece out on your printer’s plates.

    1. Pick a building, or write a list of them for a whole street.
    2. Size it: width, depth, storeys and roof pitch.
    3. Measure your tea light and type its width and height, so the pocket fits.
    4. Personalise it: a sign over the door, a house number, a name and a year on the base.
    5. Choose your printer below the preview, download, print and glue the roof on.

    Buildings

    The nine buildings

    BuildingUsual size (mm)What makes it
    Cottage52 × 48, 1 storeyArched door, a window either side, chimney
    Townhouse44 × 48, 3 storeysTall and narrow, door to one side
    Shop50 × 48, 2 storeysGable front, a wide shop window and a sign
    Chapel44 × 64A tower with a belfry and spire, tall pointed windows
    Bakery60 × 48, 2 storeysArched shop windows either side of the door
    Toy shop48 × 48, 2 storeysGable front, two display windows, round gable window
    Train station88 × 48A long hall with arched windows and a wide door
    Barn54 × 52Big braced door and a hayloft door
    Lighthouse48 acrossStriped tower, gallery, lantern and cap

    Every building is an original, generic design. In a street each uses its usual size; pick One building to set your own.

    Light

    Lighting it safely

    Use battery lights only. Printed plastic softens with heat and can burn, so never put a real candle inside.

    OptionWhat you getMeasure
    Tea-light pocketA round pocket in the base, your light’s width plus the clearance all round, with a collar when there’s room and a hole underneath to push the light outThe light’s width and body height
    Light-string channelA groove across every tile under the buildings, for the wire of a battery light stringThe widest part of the wire
    Glass panelsThin panels behind each window, printed flat in white or natural filament, that glow when litNothing: they are sized from the windows

    Printing

    Printing tips

    • Walls: print upright as one hollow piece. Window and door tops bridge short gaps; most printers manage these without supports.
    • Roof: two halves printed flat. The pitch is capped at 45° so the ridge edge doesn’t need supports. Glue them onto the gable walls.
    • Snow: on one nozzle, add a filament change to white where the snow starts, 2.4 mm up each roof half. On a multi-material printer, give the Snow part white.
    • Chimney: prints upside down on its snow cap, then glues onto the roof.
    • Glass: 0.6–0.8 mm panels in white or natural PLA or PETG let the light through. Each fits a rebate behind its window from the inside.
    • Signs and numbers: flat pieces with raised letters, printed face up with a filament change, then glued on.
    • Tiles: pegs fit their sockets with 0.25 mm all round. If yours are tight, sand the peg lightly.
    • Small parts: trees, lamp posts and number plaques are small. Not for children under 3.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview. Every wall set, roof half and tile is its own piece, spread over as many plates as needed; the readout shows how many.

    Can I sell village houses I print?

    The designs you make are yours, and the buildings are original, generic designs. The typefaces are open-licensed, which allows making physical products. Trees, lamp posts and plaques are small parts, so check toy-safety rules before selling for children.

    Can I use a real candle?

    No. Use a battery tea light or a battery light string. Printed plastic softens and can burn near a flame.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.

    1. Tealight Wikipedia
    2. Color change Prusa Research
    3. Design the clearance and tolerance UAL Creative Computing Institute
    4. SIL Open Font License SIL International