Free generator · Runs in your browser

Photo frame generator Every photo deserves a frame.

Make a 3D printable photo frame for prints, Instax and Polaroid film, or a lithophane: a Polaroid-style caption, a heart or oval window, and a stand that plugs in. No supports.

  • Private by designNothing leaves this device
  • Prints and instant filmSized to the real photo
  • Lithophane readyRing back and tea-light base
  • Ready to sliceSTL, 3MF and per-colour files

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Photo

Orientation
90 mm
130 mm
0.4 mm
100 mm
80 mm
3.2 mm

Its thickest part. Match the lithophane generator’s setting.

Frame

Style
11.0 mm
3.0 mm
Window
2.0 mm

Caption

Engraved into the wide bottom border.

Typeface
Caption

Captions go on the Polaroid style’s wide bottom border.

Stand

Display
15 °

On the back panel, for a nail or screw head up to 8 mm across.

39.0 mm

Measure your LED tea light; the base’s pocket is this wide. Lithophanes always get the base.

Download and colours

Preview the frame

The frame prints face down; downloads are always laid out as printed.

Download

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    Make a photo frame in four steps

    Choose what the frame holds and the generator sizes everything around it: the window, the pocket behind it, a back panel that presses in, and a stand. Every part prints flat with no supports.

    1. Pick the photo. A print size, instant film, or a lithophane you made.
    2. Style the frame. Polaroid-style or even borders, and a window shape.
    3. Add a caption. It’s engraved into the wide bottom border.
    4. Print and assemble. Photo in, back panel pressed in, leg plugged in.

    Sizes

    Photo sizes it fits

    PhotoSizeWindow
    4 × 6 in print101.6 × 152.4 mmHides 3 mm of each edge
    5 × 7 in print127 × 177.8 mmHides 3 mm of each edge
    3.5 × 5 in print88.9 × 127 mmHides 3 mm of each edge
    Instax mini54 × 86 mmShows the whole photo and its border
    Instax square72 × 86 mmShows the whole photo and its border
    Instax wide108 × 86 mmShows the whole photo and its border
    Polaroid (i-Type, 600, SX-70)88.5 × 107.5 mmShows the whole photo and its border
    LithophaneYour sizeHides 3 mm of each edge; lit from behind

    Lithophanes

    Framing a lithophane

    Choose A lithophane, then make a flat lithophane at the size the page gives you in the lithophane generator. The frame’s back is a ring, so light passes through, and the base has a pocket for an LED tea light behind the picture. Use LED lights only: never a flame.

    Printing

    Printing it well

    • Face down: the frame’s front is the first layer, so a smooth or textured build plate gives it a lovely finish.
    • Fit: the back panel has 0.25 mm of clearance a side, so it presses in snugly. If it’s loose, a strip of tape holds it.
    • Colours: print the frame and back in different colours, or inlay the caption on a multi-material printer.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Everything prints flat. A 4 × 6 frame with its back and leg fits a 256 mm bed; for smaller beds, download the frame, back and stand separately.

    Can I put glass or acrylic in it?

    Use A custom size and set the thickness to your photo plus the sheet, and cut the sheet to the photo size.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-08. Community posts are one maker's experience, not a specification.

    1. What are Polaroid photo dimensions? Polaroid
    2. Instax film formats Wikipedia
    3. Photo print sizes Wikipedia