Free generator · Runs in your browser

Potion bottle generator Brew it, print it.

Make decorative potion bottles: eight shapes, cork-style stoppers, screw caps and gem toppers, raised or engraved labels, and sets of up to eight bottles in a rack beside a bubbling cauldron.

  • Private by designNothing leaves this device
  • Eight shapesFlasks, vials, hearts and more
  • No supportsShaped to 45° for printing
  • Ready to sliceEvery part its own object

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Bottles

How many bottles
86 mm

From the base to the top of the neck. Every bottle in a set shares the size.

64 mm

Across the front at the widest point.

16.0 mm
14 mm

Walls

Nozzle
3

The wall is this many slicer lines thick (each about 1.125 × the nozzle), so it fills with whole lines and no gaps.

Downloads a solid bottle; turn on spiral (vase) mode in your slicer for one smooth, fast wall. Screw caps need normal walls.

Stopper

Stopper
Topper
2.00 mm

Coarser threads print more reliably. The profile is the 60° ISO basic form; it is not a standard bottle finish, so only this cap fits.

0.25 mm

The gap between stopper and neck. Plugs taper so they wedge near the top; caps get half on each thread face.

Label

Label

One line per bottle, in order. Short words print biggest.

On the parchment
Icon
Style
Typeface

Set

Holder
0.6 mm

How much bigger each pocket is than its bottle, all round.

80 mm

A disc with bubbles that drops in and wedges inside the bowl.

Colours

Preview

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    How to make a potion bottle

    Pick a shape and a size, choose a stopper and a label, and the generator turns a bottle with walls a whole number of slicer lines thick, a neck that fits its stopper, and every part laid out on your printer’s plates.

    1. Pick the shapes: one bottle, or up to eight mixed in a set.
    2. Set the walls for your nozzle, or choose a solid model for spiral vase mode.
    3. Choose a stopper: a tapered cork-style plug, a gem or bead topper, or a screw cap on a printed thread.
    4. Add a label: raised or engraved text, an icon, or a curved parchment plate.
    5. Download and print. Bottles, stoppers, labels, the rack and the cauldron are each their own object.

    Shapes

    The bottle shapes

    ShapeLooks likeLabel
    Round flaskA ball with a neck, the classic health potionOn the belly
    Conical flaskA lab flask with straight sloping sidesLow on the cone
    Tall vialA slim tube with a short shoulderAlong the side
    Heart bottleA heart from the front, the neck rising between its lobesNone: the shape says it
    Square apothecaryFlat faces and rounded cornersOn the front face
    Skull bottleA cranium and jaw with an engraved faceNone: it wears its face
    GourdTwo stacked bulbsOn the lower bulb
    TriangularThree rounded facesOn the front face

    Stoppers

    Stoppers, threads and fit

    StopperHow it fitsPrint it
    Cork-style plugTapers 0.7 mm in diameter: the tip has the clearance you set, so it wedges snugly near the topHead-down, no supports
    Gem or bead topperThe same plug with a short head; the gem or bead is its own part with a flat baseGem on its base; glue it on
    Screw capA 60° thread (the ISO basic form) on the neck and the matching thread in the cap, with half the clearance on each faceCap top-down, no supports

    The thread is the generator’s own size, not a standard bottle finish: only the cap made with the bottle fits it. Print a single bottle and cap first if you change the clearance.

    Printing

    Printing tips

    • No supports: every shoulder, bulge and lug is held to 45°, so bottles print upright as they stand.
    • Walls: the wall is a whole number of lines, about 1.125 × the nozzle each, so the slicer fills it without gaps.
    • Vase mode: choose the solid model and turn on spiral vase mode for one fast, seamless wall. Measure the neck before printing the stopper.
    • A filled look: a colour change around half height gives a coloured potion under a pale top.
    • Translucent filament glows when lit from behind; walls of one or two lines let the most light through.

    Honesty

    Props, not containers

    These bottles are decorative props for shelves, costumes, games and parties. They are not for food, drink, medicine or chemicals: printed walls can leak between layers, can’t be cleaned like glass, and most filaments and colourants aren’t tested for contact with what you’d put inside. Stoppers, gems and beads are small parts, so keep them away from children under 3.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview. Bottles, stoppers, labels, the rack and the cauldron spread over as many plates as they need, and the preview warns if one item is bigger than the bed.

    Can I sell bottles I print?

    The designs you make are yours. The typefaces are open-licensed, which allows making physical products. Sell them as decorations, not containers, and check toy-safety rules for small parts before selling for children.

    Will it hold water?

    Sometimes, but don’t rely on it. Thicker walls and slightly hotter printing help, yet printed walls can still seep. They are props: never use them for drinks or chemicals.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-10. Community posts are one maker's experience, not a specification.

    1. Layers and perimeters (spiral vase) Prusa Research
    2. Creating profiles for different nozzles (default extrusion width) Prusa Research
    3. ISO metric screw thread Wikipedia
    4. Modeling with 3D printing in mind Prusa Research
    5. Color change Prusa Research
    6. Food-safe FDM printing Prusa Research
    7. Small parts for toys and children’s products US Consumer Product Safety Commission
    8. SIL Open Font License SIL International