The method
How to make a name puzzle
A name puzzle is a tray with a pocket shaped like each letter of a child’s name, and chunky letter pieces that drop into them. This generator traces each letter, grows its pocket by the gap you choose, and lays the name out in one or more rows to fit your printer. Every piece is checked against the small-parts test cylinder.
- Type the name and pick a typeface. Rounded faces like Fredoka are easiest for small hands.
- Check the small-parts readout. If a piece could fit the cylinder, the page says how tall the letters need to be.
- Pick your printer below the preview so the rows and plates fit its bed.
- Download and print the tray and the pieces flat, with no supports.
Safety
Small parts and choking
US rules ban toys for children under 3 that have small parts (16 CFR 1501). A part is small if it fits entirely inside a test cylinder 31.8 mm across, with a slanted floor 25.4 mm deep on one side and 57.1 mm on the other, in any orientation. Pieces that break off during use-and-abuse tests count too.
| Rule | What the generator does |
|---|---|
| Longer than 65.4 mm | No straight line inside the cylinder is longer, so the piece can’t fit. Checked with 1 mm to spare. |
| Wider than 31.8 mm every way across | The piece can’t pass through the opening in any orientation. Also checked with 1 mm to spare. |
| Dots and accents | Joined to their letter with a bridge, so an i or É is one piece. |
| Punctuation | Left out. A full stop or hyphen would be a tiny loose piece. |
| Knobs | Off by default. A knob that snaps off is a small part, so print knobbed pieces solid and pull-test them. |
The check measures whole pieces as designed. It can’t tell whether a print is strong, so look over every piece before play. It is not a safety certification: children’s products sold in the US must be tested by a CPSC-accepted lab and certified, and small parts is one of the rules that small-batch makers get no testing relief from.
Sizes
Choosing a size
| Letter height | Letters per row on a 256 mm bed | Notes |
|---|---|---|
| 55–65 mm | About 5 | Narrow letters such as I and L may fail the small-parts check |
| 67–75 mm | About 4 | Every capital passes; the default |
| 80–100 mm | About 3 | Chunky and easy to grab; use 2–3 rows |
Lowercase letters are shorter than capitals, so some fail the check at sizes where capitals pass. The readout names any that do.
Printing
Printing tips
- Plates: the tray and pieces are laid out together when they fit; otherwise each plate is its own file in a zip.
- Colours: in the 3MF every piece is its own object in its own colour. On one nozzle, print each colour’s pieces together.
- Strength: three walls and 15–20% infill. Knobbed pieces need 100% infill or at least five walls.
- First layer: elephant’s foot makes pieces tight. Raise the gap around each letter if they stick.
- Material: PLA or PETG. Wipe clean; printed plastic isn’t made for chewing, so supervise play.
Questions, answered
Is it free to use?
Yes. No account, no watermark, no limits.
Why are some letters flagged as small parts?
Narrow letters such as I, J and L, and short lowercase letters, can slip into the test cylinder end-first at smaller sizes. Make the letters taller, as the readout suggests, or use capitals.
Can I sell the puzzles I make?
The typefaces are open-licensed and allow making physical products. Toys for children 12 and under sold in the US need third-party testing and a Children’s Product Certificate, so check the CPSC rules before you sell.
The pieces are too tight. What now?
Raise Gap around each letter by 0.2 mm and reprint the tray, or run the tolerance test to find your printer’s number. Toddlers need a looser fit than adults.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-09. Community posts are one maker's experience, not a specification.
- 16 CFR Part 1501: method for identifying toys and other articles intended for use by children under 3 years of age which present choking, aspiration, or ingestion hazards because of small parts eCFR
- Small Parts Ban and Choking Hazard Labeling U.S. Consumer Product Safety Commission
- Children’s Product Certificate U.S. Consumer Product Safety Commission
- Small Batch Manufacturers and Third Party Testing U.S. Consumer Product Safety Commission