Free generator · Runs in your browser

Pixel art maker Every pixel, its own colour.

Draw pixel art or import a picture, and print it as a keychain, fridge magnet, coaster, desk stand or a set of wall tiles, with every colour its own part in the 3MF.

  • Private by designPictures stay on this device
  • Draw or importA pad from 8 × 8 to 64 × 64
  • No supportsEverything prints flat
  • Ready to sliceOne named part per colour

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Draw

Click or drag to draw. With the keyboard: arrow keys move the cursor, Space paints, Shift with an arrow paints as it moves, number keys 1 to 8 pick a colour, 0 picks the eraser, F fills, I picks up a colour, Ctrl+Z undoes and Ctrl+Y redoes.

Start from a sprite

Import a picture

Sharp keeps hard pixel edges and finds the grid of real pixel art by itself. Smooth averages each cell, for photos. The picture stays on this device.

Colours

4

Each colour is its own part in the 3MF, named after the colour unless you type a name. With stepped heights, give every colour its own height in steps of 0.2 mm.

Pick a real filament colour

Make

Make a
3.0 mm

Each cell’s width. Keep it at least twice your nozzle: 0.8 mm for a 0.4 mm nozzle, and 2 mm or more for crisp corners.

4.5 mm

Measure the wire of your key ring or clasp and add a little.

Measure your magnets: the pocket is 0.3 mm wider and 0.2 mm deeper.

100 mm

The pixels scale to fill it.

Joining and hanging

The art splits into tiles that fit your printer, picked below the preview (220 × 220 mm if none). Square pins line the tiles up; keyholes on the top row hang the set on nails or screws.

Measure your phone with its case: the groove in front is 1 mm wider.

Preview

Style

Pixels

Every colour in one flat layer: for a multi-colour printer. On a rectangle, empty cells fill flush in the backing colour.

Each colour stands at its own height (set beside each colour), so a single nozzle can print it with a colour change at each step.

Round pixels with a hole, like ironed fuse beads.

1.2 mm

How far the pixels stand on the backing (or their full thickness without one).

Holds separate pieces of the art together. Keychains, magnets and the rest always have one.

2.4 mm
Shape
1.5 mm

Backing beyond the art. Cut to the art, it rounds the outline and fills tiny gaps.

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    How to 3D print pixel art

    Draw on the pad, start from a sprite or import a picture. Touching cells of one colour join into one shape, every colour becomes its own part, and the generator adds the backing, ring, magnet pocket, rim, stand or tile joints for what you make.

    1. Draw with the pen, fill and mirror tools, or import a picture.
    2. Set the colours. Name them, or pick a real filament colour.
    3. Choose what to make and the pixel size.
    4. Download the 3MF and give each part its filament, or use stepped heights and colour changes on one nozzle.

    Products

    What you can make

    MakeWhat it addsGood pixel size
    PlaqueThe art on its own, cut to its outline or on a rectangle2–5 mm
    KeychainA ring above the top of the art, with a hole you size2–3 mm
    Fridge magnetA pocket under the art for a magnet you measure, open at the back2.5–4 mm
    CoasterA square coaster you size, with the art scaled to fill it and a rimSet by the coaster size
    Wall tilesBig art split into tiles that fit your bed, with square pins and keyholes6–12 mm
    Desk standA plaque and a base that holds it upright, with a groove for a phone3–5 mm

    Styles

    Flat, raised, stepped or beads

    StyleLooks likePrinter
    Flat tilesA flush mosaicMulti-colour, one part per colour
    RaisedPixels standing on the backingMulti-colour, or one colour change for one-colour art
    Stepped heightsEach colour at its own heightOne nozzle: a colour change at each height
    Fuse beadsRound pixels with holesMulti-colour

    On one nozzle, stepped heights show each colour on top: the generator lists the heights to change filament at.

    Printing

    Printing tips

    • Pixel size: at least two lines of your nozzle (0.8 mm on a 0.4 mm nozzle). Bigger pixels print crisper corners.
    • Multi-colour: open the 3MF and give each named part its filament.
    • One nozzle: choose stepped heights and add a colour change at each listed height.
    • No supports: the magnet pocket is open at the back, and pin holes and keyholes only bridge short gaps.
    • Magnets: the pocket is 0.3 mm wider than the magnet; a drop of glue holds it.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview. Wall tiles split to fit its bed; for anything else, lower the pixel size if it is too big.

    Can I sell what I print?

    Designs you draw are yours, and the built-in sprites are original to this site. Pictures you import must be yours to use: characters from games and films belong to their owners. Keychains and magnets are small parts, so check toy-safety rules before selling for children.

    Does my picture leave my device?

    No. Pictures are scaled and reduced to colours in your browser. Share links hold only the drawing and settings.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.

    1. What Is the Minimum Wall Thickness for 3D Printing? QIDI Technology
    2. Color change Prusa Research
    3. What size should my custom drink coasters be? 4OVER4