Free generator · Runs in your browser

Pill organizer generator Sized to your pills.

Make a weekly, monthly or custom pill organizer with compartments sized from your own pills, flip, sliding, carousel or strip lids, day names in any language, braille and large print.

  • Private by designNothing leaves this device
  • Four lid typesFlip, sliding, carousel, strips
  • Braille and large printLabels you can feel
  • Ready to sliceSTL and multi-colour 3MF

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Layout

Layout
Doses a day

Rows run from morning at the back to night at the front, each with its own icon: sunrise, sun, sunset and moon.

31

Numbered compartments in rows of seven.

3
4

Compartments

Size the compartments

Measure your largest pill with calipers or a ruler. There is no standard pill size, so use your own.

12.0 mm
6.0 mm
6.0 mm
4

The pills are laid flat side by side, in layers if needed.

2.0 mm

Added to each inside size, so pills drop in and tip out easily.

24 mm
22 mm
16 mm

Rounds the bottom of each compartment so pills slide out with a fingertip.

2.0 mm
1.6 mm

Lids

Lid

A lid on every compartment, on hinges printed in place. The whole organizer prints in one piece with the lids laid open flat. Up to two rows (one or two doses).

One lid per day (per column), sliding out the front in 45° dovetail grooves.

A round box of seven wedges and one blank space. Turn the cover so its single opening shows today; park it on the blank space to close.

Each day is its own small box with a sliding lid, snapped into a holder. Take one day with you.

0.30 mm

The gap at every hinge, lid and snap. Tight printers fit at 0.2 mm; the hinge generator has a clearance test.

Snap stiffness

How hard the lids click shut. Soft is easier for stiff fingers; firm stays shut in a bag.

Labels

Day names are written by your browser. Letters outside the typeface print in a fallback typeface.

Day names
Week starts on

7.5 mm letters instead of 4.5 mm, in Atkinson Hyperlegible, a typeface made for readers with low vision.

Sunrise, sun, sunset and moon, so doses can be told apart by touch as well as sight.

Labels are

Grade 1 braille letters on sliding lids, carousels and strips. Flip lids print top down, so they cannot carry braille dots.

Dot size
Braille letters

Colours and view

Lid colours

Each colour is its own part in the 3MF, for multi-colour printers.

Preview

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    How to make a pill organizer

    Measure a pill, say how many go in each compartment, pick a layout and a lid, and the generator sizes every compartment, labels it and lays everything out on your printer’s plates. Everything is built on this device.

    1. Pick the layout: a week, two weeks, a month or your own grid, with up to four doses a day.
    2. Measure your largest pill (length, width, thickness) and set how many go in each compartment. Each inside size is the pills laid flat plus the extra room you choose.
    3. Choose a lid: flip lids, sliding lids, a carousel or daily strips.
    4. Label it: day names in your language, dose icons, braille and large print.
    5. Download and print in PETG, as laid out, with no supports.

    Lids

    Which lid to choose

    LidHow it worksHow it printsGood for
    Flip lidsA lid on every compartment, on cone-pin hinges, clicking shut with a bump on its lipOne piece, lids laid open flatWeekly AM/PM boxes
    Sliding lidsOne lid per day in 45° dovetail groovesTray upright, lids flatBraille and large print
    CarouselA turning cover with one opening over seven wedges and a blankBase upright, cover upside downOne dose a day
    Daily stripsEach day a small box with a sliding lid, snapped into a holderStrips upright, lids flatTaking a day with you

    Options

    Sizes and options

    SettingRangeWhat it does
    Pill sizeMeasured by youNo standard size exists: measure your largest pill
    Extra room0.5–6 mmAdded to each inside size
    CompartmentAt least 14 × 14 × 8 mm insideRoom for a fingertip; flip lids need about 13 mm depth for their hinges
    Clearance0.15–0.6 mmThe gap at hinges, lids and snaps
    Snap stiffnessSoft, medium, firmA snap overlap of 0.15, 0.3 or 0.45 mm
    Letters4.5 mm, or 7.5 mm large printCapital height, in Atkinson Hyperlegible
    Braille dotsSign or paper sizesThe same dot sizes as the braille label generator

    Accessibility

    Braille, large print and touch

    Braille day labels use Unified English Braille, Grade 1 (uncontracted) letters, with domed dots at the sign sizes from the 2010 ADA Standards’ ranges or the paper sizes from NLS Specification 800: the same dimensions as the braille label generator. Letters with accents are written without them, and other scripts are left out, because other braille codes differ.

    Not a compliance claim. Printed braille is approximate. Ask a braille reader to check the labels before relying on them.

    • Large print sets letters 7.5 mm tall in Atkinson Hyperlegible, designed by the Braille Institute for readers with low vision.
    • Dose icons are raised or engraved shapes (sunrise, sun, sunset, moon) that can be told apart by touch.
    • Contrast: raised labels in a dark colour on light lids, or the reverse, are easiest to read.

    Safety

    Safety and cleaning

    Not child-resistant. A printed pill organizer is not child-resistant packaging, which in the US must pass tests under the Poison Prevention Packaging Act. Keep it up high and out of sight of children, and keep each medicine’s original pharmacy container and label. The generator makes no medical claims; ask a pharmacist how to sort your medicines.

    • PETG: its base polymer is generally considered food-safe, but printed layers leave tiny grooves where dirt and bacteria can collect. Fine layers and a smooth inside help.
    • Cleaning: wash by hand in warm soapy water and dry fully before refilling. Hot dishwasher cycles can warp printed parts.
    • Nozzle: for parts that touch food, Prusa recommends a clean stainless steel nozzle; brass nozzles can contain lead.

    Printing

    Printing tips

    • No supports: grooves, snaps and hinges are 45° or flatter, and flip lids print laid open.
    • Print slowly for the hinges: about 40 mm/s on outer walls and a clean, unsquashed first layer keep the hinge gaps open. Print the hinge clearance test if unsure.
    • Braille: fine layers (0.08–0.12 mm) give rounder dots.
    • Two colours on one nozzle: add a colour change at the top of the lids for raised labels.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview. The tray, lids and strips are laid out side by side and spread over several plates if they need to. If the tray itself is too big, make the compartments smaller.

    Can I sell organizers I make?

    The designs you make are yours. The typeface is open-licensed, which allows making physical products. Do not sell them as child-resistant or as a medical device, and check the rules where you sell.

    Is it child-resistant?

    No. Keep it out of reach and sight of children, as you would any medicine.

    Is the braille correct?

    It uses Grade 1 letters at standard dot sizes, but printed dots vary. Ask a braille reader to check it.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.

    1. Poison Prevention Packaging Act US Consumer Product Safety Commission
    2. Up and Away campaign resources US Centers for Disease Control and Prevention
    3. Food safe FDM printing Prusa Research
    4. Bacterial biofilm growth on 3D-printed materials Frontiers in Microbiology (2021)
    5. 2010 ADA Standards, 703.3 Braille US Access Board
    6. Specification 800: Braille books and pamphlets Library of Congress, NLS
    7. Braille Institute launches typeface designed to improve legibility for readers with low vision Braille Institute (PR Newswire)
    8. SIL Open Font License SIL International