Free generator · Runs in your browser

Fidget clicker generator A name you can click.

Type a name and get a print-ready fidget clicker: a body for real keyboard switches and keycaps with your letters on top. Fit-tested sockets, no supports, one colour or three.

  • Private by designNames stay on this device
  • Real switchesAny MX-style switch
  • Fit you can tuneA 20-minute fit test
  • Ready to sliceSTL, 3MF and per-colour files

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Keys

Make
Keys from

A name gives one key per letter. With Words, each word gets a key: try "OK NO GO". Up to 12 keys.

3
Layout
3

A three-socket strip and three caps, each a step tighter or looser than your settings, marked with one to three dots. Print it once to find your best fit.

Letters

Typeface
10.0 mm

The height of a capital. Longer labels shrink to fit the 14.6 mm key top.

0.15 mm
Lettering
0.8 mm
0.6 mm

Body

Shape
4.0 mm
3.0 mm
19.50 mm

Centre to centre. Keyboards use 19.05 mm; 19.5 mm leaves room for printed caps.

Back

Cut into the back, readable when you turn the clicker over.

An open back is quicker to print and lets you push switches out from below. The switch pins show.

Key ring
4.5 mm
2.4 mm

Fit

Turn off to use keycaps you already have.

0.10 mm

Added to the 14 mm cutout. Loose switches: lower it. Switches that won’t go in: raise it.

0.150 mm

Added to the 4.1 × 1.17 mm cross. Caps that fall off: lower it. Caps that won’t go on: raise it.

2.4 mm

Preview and colours

Preview
Download

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    Make a name clicker in five steps

    A fidget clicker is a small body holding real keyboard switches, with a keycap on each one. This generator builds the body around your keys and prints the caps with your letters on top. Everything runs in your browser.

    1. Type the letters. A name gives one key per letter. Switch to Words for labels such as OK and GO, or Blank keys for plain caps.
    2. Run the fit test once. Printers make holes a little small. The 20-minute test strip finds the hole and stem sizes that suit your printer.
    3. Shape the body. Pick a row or a grid, a key ring and an open or closed back.
    4. Download and print. Every part prints upright with no supports.
    5. Assemble. Press the switches into the sockets, then press the caps onto the switches.

    What you need

    Which switches to buy

    The sockets take any MX-style switch: the common kind with a + shaped stem, made by Cherry, Gateron, Kailh, Akko and many others. Hot-swap switches made for keyboards work too. Low-profile switches (such as Kailh Choc) don't fit.

    TypeHow it feelsGood for
    Clicky (often blue)A bump and a sharp clickThe classic clicker sound
    Tactile (often brown)A bump, almost silentQuiet fidgeting at school or work
    Linear (often red)Smooth, no bumpA soft, quiet press

    Each switch travels 4 mm and registers about halfway, at 2 mm (Cherry's figures). The keycaps leave room for the full travel, so they never bottom out on the switch.

    Fit

    Getting a snug fit

    Two sizes decide whether a clicker feels solid:

    • The switch hole starts from the 14 mm square cutout used in keyboard plates. The clips on the switch spring out under a 1.5 mm plate. If a switch rattles, lower Switch hole fit; if it won't press in, raise it.
    • The keycap cross starts from Cherry's 4.1 mm cross with 1.17 mm arms. Printed holes come out small, so the default adds 0.15 mm. That's almost exactly what the open-source KeyV2 keycap library uses for printing.

    The fit test prints three sockets and three caps at one step tighter, your setting and one step looser, marked with one, two and three dots. Use the one that fits best, then set the sliders to match.

    Two colours

    Letters in a second colour

    LetteringPrinterHow
    RaisedAny printerPrint the keycaps on their own (Download: Keycaps only) and add a colour change at the height the page gives you. On a full plate, the body above that height would change colour too.
    Flush inlayMulti-material (AMS, MMU)The letters fill a pocket in the key top. The 3MF keeps them as a separate coloured part.
    EngravedAny printerLetters are cut 0.6 mm into the key top. Fill them with acrylic paint and wipe the top clean.

    Printing

    Print settings that work

    • Orientation: as laid out. The body stands on its back, and each keycap stands on its skirt with its stem post on the bed. Nothing needs support.
    • Layers: 0.2 mm is fine; 0.12 mm gives smoother key tops.
    • Material: PLA for most clickers; PETG for a keychain that lives in a hot car.
    • First layer: the stem socket starts on the bed and flares out slightly, which cancels elephant's foot. A squashed first layer can still close it up, so keep the first layer tidy.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Do store-bought keycaps fit the body?

    Yes. Any MX-compatible keycap fits a switch in these sockets. Turn off Print keycaps to download the body alone, and set Key spacing to 19.05 mm for standard-size caps.

    Can I make a clicker with more than one letter per key?

    Yes. Choose Words: each word becomes one key, and longer labels shrink to fit the key top.

    My keycaps fall off or won’t go on. What should I change?

    Change Keycap stem fit in steps of 0.025 mm: lower it if caps fall off, raise it if they won’t press on. The fit test shows three settings at once.

    Which typefaces can I use, and can I sell what I make?

    All the typefaces are open-licensed (SIL Open Font License or Apache 2.0), which allows using them to make physical products, including ones you sell.

    Is a clicker safe for young children?

    No. Keycaps and switches are small parts and a choking hazard for children under 3.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-08. Community posts are one maker's experience, not a specification.

    1. CHERRY MX Black Clear-Top data sheet (travel and pretravel) Cherry
    2. CHERRY MX2A Brown data sheet (height and width) Cherry
    3. Switch dimensions and physical specifications (plate cutout and thickness) ai03 keyboard design wiki
    4. KeyV2: parametric keycap library (stem cross for printing) GitHub
    5. Color change Prusa Research
    6. SIL Open Font License SIL International