Free tool · Runs in your browser

STL to 3MF converter One tidy package.

Package STL and OBJ files as a 3MF: millimetres stated in the file, smaller downloads, and each part named and coloured. Runs in your browser, nothing uploaded.

  • PrivateConverted on your device
  • Named partsColours kept
  • Units statedAlways millimetres
  • Opens anywhereEvery modern slicer

Drop a file anywhere here · Drag to rotate · Scroll or pinch to zoom

Size
—
Volume
—
Weight
—
Fits
—

File

Size and orientation

STL and OBJ files don’t say their units. If the model looks 25 times too small, it was made in inches.

100 %
Turn 90°

Mesh check

Watertight
—
Separate bodies
—
Triangles
—
Surface area
—
Overhang area
—

Weight and cost

2
15 %
Estimated weight
—
Filament
—
Material cost
—
If printed solid
—

An estimate from walls and infill; your slicer gives the exact figure. How it’s worked out

Download

Download as

For files with several objects or plates. 3MF always keeps them as parts.

Off keeps the original position.

Open a file to convert it.

Your file is read on this device and is never uploaded.

Advertisement

The method

Why convert STL to 3MF

  • Units are stated. The 3MF says millimetres, so it can’t arrive at the wrong scale.
  • Smaller files. 3MF stores each vertex once and compresses the package. In our tests a 3MF was about a fifth the size of the same model as binary STL.
  • Several parts in one file, each with a name and a display colour, loaded as parts of one object.

Every current slicer, including Bambu Studio, PrusaSlicer, Orca Slicer and Cura, opens 3MF.

Mesh check

What the checks mean

  • Watertight: every edge is shared by exactly two triangles facing the same way. Slicers need this to know what is inside the part.
  • Open edges are holes in the surface; non-manifold edges are shared by three or more triangles; flipped faces point inward. Most slicers repair small problems on import, but a clean mesh slices predictably.
  • Separate bodies are pieces that don’t touch. Several bodies in one STL is normal for print-in-place parts and plates of parts.
  • Overhang area is surface facing down at more than 45° from vertical, not counting the face on the bed. It’s a rough guide to where supports may be needed.

Estimates

How the weight is worked out

A printed part is a solid skin plus sparse infill. The tool takes the surface area times the wall thickness (walls × 0.42 mm lines) as the skin, fills the rest of the volume at your infill percentage, and multiplies by the material’s density. Your slicer knows the real toolpaths, so treat this as a quick estimate.

MaterialDensitySource
PLA1.24 g/cm³Prusament PLA data sheet (ISO 1183)
PETG1.25 g/cm³Polymaker PolyLite PETG
ABS1.04 g/cm³Polymaker PolyLite ABS
ASA1.13 g/cm³Polymaker ASA
TPU 95A1.22 g/cm³Polymaker PolyFlex TPU95
PC1.19 g/cm³Polymaker PolyLite PC
Nylon (CoPA)1.12 g/cm³Polymaker PolyMide CoPA
PLA-CF1.29 g/cm³Polymaker PLA-CF

Densities vary by brand and colour, by a few percent. Check your filament’s data sheet for its exact value.

Questions, answered

Can I combine several STL files into one 3MF?

This version converts one file at a time. Files that already hold several objects keep them as separate parts.

Will my slicer open it?

Bambu Studio, PrusaSlicer, Orca Slicer and Cura all open 3MF.

Is my file uploaded?

No. It is converted in your browser.

Sources

Print advice is a starting point drawn from these references, checked on 2026-11-07. Community posts are one maker's experience, not a specification.

  1. 3MF Core Specification 3MF Consortium
  2. STL (STereoLithography) File Format Family Library of Congress
  3. Prusament PLA technical data sheet Prusa Research
  4. Technical data at a glance (densities) Polymaker