Free tool · Runs in your browser

3MF colour splitter One object per colour.

Open a model you painted in your slicer, or a coloured 3MF, and get one closed object for each colour: a 3MF with named, coloured parts and a zip of STLs. Painted borders are kept exactly. Nothing is uploaded.

  • PrivateFiles never leave your device
  • Exact bordersPainted pieces rebuilt as triangles
  • Closed solidsColour skins over a core
  • Ready to print3MF and one STL per colour

Drop a file anywhere here · Drag to rotate · Scroll or pinch to zoom

0%
Objects
—
Triangles
—
Colours
—
Filament slots
—

Colours

Switch a colour off to see inside.

    Mesh check

      Painted model

      Save the project as a 3MF in your slicer (the project file, not a sliced plate file). STL files carry no colour.

      How to split

      Inside of the model

      1.2 mm

      How deep each colour reaches into the model. 1.2 mm is about three lines from a 0.4 mm nozzle; use at least two lines’ worth so the colour stays solid. Thicker uses more of each colour.

      The core is printed in this colour, under the skins of the others.

      Two filament slots or materials with the same colour become one object. Turn this off to keep one object per slot.

      Download

      Parts stay together when you move them; separate objects can be placed and printed one at a time.

      One named, coloured object for each colour.

      Open a painted 3MF to split it.

      Your file is read on this device and is never uploaded.

      Advertisement

      The method

      From painted triangles to one object per colour

      When you paint a model in your slicer, the colours are saved inside the 3MF as codes on the triangles, not as separate objects. This tool reads those codes and makes one closed object for each colour, so you can open the model in another slicer, print on a printer without a filament changer, or edit the colours in a design program. It runs in your browser and nothing is uploaded.

      1. Save the project as a 3MF in your slicer, with the painting done.
      2. Open it here. The checks list the objects, triangles, colours and filament slots found.
      3. Choose the skin thickness and where the inside of the model goes.
      4. Check the preview. Switch colours off, or pull them apart, to see each piece.
      5. Download a 3MF with one named, coloured object per colour, or a zip with one STL per colour.

      File formats

      Which colour data it reads

      What the 3MF holdsWhere it is keptWhat this tool does
      Colours painted in your slicerA paint code on each painted triangle (an attribute named slic3rpe:mmu_segmentation or paint_color). The code can cut the triangle into smaller pieces, each with its own filament number.Cuts every painted triangle into its pieces and sorts them by filament number. Unpainted areas take the part’s own filament.
      A filament for each object or partThe slicer’s model settings inside the 3MF (Metadata/Slic3r_PE_model.config or Metadata/model_settings.config)Uses that filament for the part. A part in one colour stays a solid part in that colour.
      Colours from a design program3MF base materials or colour groups, referenced per triangle or per objectEach material or colour becomes its own object, named as in the file.
      Filament coloursThe slicer’s project settings inside the 3MFColours each object to match. Slots with no colour get one from a fixed palette.
      • Exact borders. A painted triangle can be cut into halves and quarters, again and again, to follow your brush. Every cut is rebuilt as real triangles, so the border between colours is exactly where you painted it.
      • Filament numbers. Painted areas are named “Filament 1”, “Filament 2” and so on, the slot they were painted with.
      • Plate files. A sliced plate file holds printer moves, not the painted model. Open the project 3MF instead.

      Closed solids

      Why each colour is a skin

      SettingWhat you getGood for
      Core in the main colourEvery other colour is a skin of the thickness you choose; the main colour is its own surface plus the whole insideMost prints: the fewest colour changes, and the inside in one filament
      Core as its own objectEvery colour is a skin, and the inside is a separate core object, coloured like the main colourPrinting the inside in a cheaper or stronger filament, or editing the colours on their own

      Painting colours only the surface. To make separate objects that each print as a solid, the inside has to be shared out too. This tool gives each colour a skin that reaches the thickness you choose into the model, and puts the rest of the inside in one core. Colour only needs to be where it shows, and some slicers have a setting that limits how far a painted colour reaches into the model for the same reason.

      • Every piece is closed. Each object is a watertight solid. The skins sit a few hundredths of a millimetre proud of the surface and the core reaches a hundredth of a millimetre into them, so pieces overlap slightly instead of touching on an exact edge, and slicers read them cleanly.
      • Thin parts. Where the model is thinner than two skins, the inside walls cross. The checks warn you; use a thinner skin.
      • No full-volume split. Sharing the whole inside between colours, so a colour runs right through the model, needs exact 3D boolean cuts that this tool doesn’t do. Skins over a core are what multi-colour prints need.

      Printing

      Printing the colours

      • With a filament changer or several tool heads, load the 3MF, keep the colours as parts of one object and give each part its filament.
      • Without a filament changer, colours that sit on top of the model (like a painted top face) can often be printed in one go with a filament change at that layer. Colours on the sides need a filament changer, because the skins are printed layer by layer next to each other.
      • Printing pieces separately works for colours that come off as a shell, such as a painted face or a band. Check the exploded view: thin skins are fragile on their own and may need a brim.
      • Line them up. All objects keep the same position, so the 3MF parts and STLs fit back together when loaded at the same place.

      Limits

      What this tool doesn’t do

      • Up to 2 million painted pieces per file in a browser tab.
      • Other painting such as support or seam painting, and fuzzy-skin or height-range settings, are ignored.
      • Texture and vertex colours from photo scans are not read; only the colour data in the table above.
      • Modifier, negative and support-blocker parts are left out of the output.
      • Meshes with holes are split as far as possible, but their pieces may not close. Repair the model first.

      Questions, answered

      Is it free?

      Yes. Every setting and download is free, with no account.

      Is my file uploaded?

      No. The 3MF is read and split by your browser, on your device. Nothing is sent to 3Dprintsy or anyone else.

      Will the pieces fit my printer?

      The pieces keep the size of your model, so they fit wherever the painted model fits. The preview shows the size in millimetres.

      Can I sell what I make?

      The pieces are made from your model, so what you may do with them depends on the model’s own licence. 3Dprintsy claims nothing over the files this tool makes.

      Why does a colour come out as many pieces?

      Each separate painted area becomes a shell of the same object. A colour painted in three places is one object with three shells, which slicers print together.

      Why is a colour missing?

      Only colours that are painted on, or set for a part, are found. A filament slot that nothing uses has no geometry. If the whole model shows as one colour, the painting may not have been saved: save the project 3MF again from your slicer.

      What does “nearest filament colour” mean?

      It is the closest colour in the filament colour list on this site, measured by how different the two colours look. It is a guide only: real filament looks different on screen and in light.

      Sources

      Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.

      1. Multi material painting Prusa Research knowledge base
      2. Multiple extruders settings, interlocking and advanced bonding Prusa Research knowledge base
      3. TriangleSelector.cpp: serialize, deserialize and perform_split (version 2.6.0) PrusaSlicer source code, GitHub
      4. Model.cpp: FacetsAnnotation set_triangle_from_string (version 2.6.0) PrusaSlicer source code, GitHub
      5. 3mf.cpp: painted triangle attributes and model config (version 2.6.0) PrusaSlicer source code, GitHub
      6. 3MF Core Specification: triangles, properties and base materials 3MF Consortium
      7. 3MF Materials and Properties Extension: colour groups 3MF Consortium
      8. What’s actually inside a 3MF from a multi-colour slicer DEV Community