Free generator · Runs in your browser

Polyhedron generator Every solid, five ways.

Make Platonic, Archimedean, Catalan and star polyhedra, or your own with Conway operators, as solids, hollow shells, wireframes, lamps with windows, snap-together classroom kits or folding nets.

  • Private by designNothing leaves this device
  • 39 shapes and morePlus Conway operators on any seed
  • Exact geometryCounts, angles and symmetry shown
  • Ready to sliceSTL, 3MF and a numbered SVG net

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Shape

The facts about the shape you pick show below.

6

Bipyramids with 3 to 5 sides have equal edges; wider ones are made as tall as they are wide.

Up to 4 letters, applied right to left: d dual (swaps faces and corners), a ambo (cuts every corner down to the edge midpoints), t truncate (cuts every corner off), k kis (raises a pyramid on every face), e expand (pulls the faces apart with a square in each edge), j join (a rhombus across every edge), o ortho (splits every face into quadrilaterals), b bevel (truncates the edges and corners), m meta (splits every face into triangles from its centre and edges), g gyro (twists every face into pentagons), s snub (twists the faces apart with triangles), n needle (kis of the dual), z zip (truncation of the dual). Example: tk on a cube truncates the kis cube.

ShapeBuilding…

Style

Make it as

One solid piece. Coloured by face type, each face is a 1.2 mm tile of its own colour over a core.

1.2 mm

How deep each face’s colour goes, when colouring by face type.

2.0 mm

A drain hole, or room for a small battery light: measure your light.

8 mm
2.4 mm

Never thinner than three nozzle widths.

Strut shape
Joints
1.6 × strut

Sets the thinnest strut allowed.

3.0 mm

The border left round each window. Faces too small for a window stay solid.

2.0 mm

Leave it open to put a battery light inside.

Every face prints flat as a numbered plate. Clips bent to the edge’s angle push into pockets on the inside of two plates.

3.0 mm
6.0 mm
0.15 mm

Room round each peg in its pocket. Raise it if the clips are too tight.

The face’s own number, and beside each edge the number of the face it joins.

The faces print flat, joined by a thin hinge layer, and fold up. Glue or tape the last edges.

1.6 mm
0.40 mm

Two layers at 0.2 mm bend well in PETG; PLA hinges may crack after many folds.

Preview

Size and printing

Size by
60 mm

Edge length is the longest edge; radius is centre to the farthest corner; height is as printed.

Rests on
0.0 mm

Slices this much off the bottom, so star shapes and corner-down solids stand on a flat face.

For ornaments. On a wireframe with a face on top, short spokes hold the loop in the middle.

5.0 mm

A round stand with a cone cup, printed beside the model, to show it on a corner.

Colours

Colour

By face type, each kind of face (and each tetrahedron of the stella octangula) is its own part in the 3MF. Wireframes use colour 1 for struts and 2 for joints; kits use the next colour for clips.

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    How to make a polyhedron

    1. Shape: pick one from the list, or a seed and Conway operators. The facts table shows its corners, edges and faces, face types, dihedral angles, symmetry and dual.
    2. Style: solid, hollow shell, wireframe, face frames, a snap-together kit or a hinged net.
    3. Size: by edge length, radius or height, and choose what it rests on.
    4. Download the STL or 3MF, and the numbered net as an SVG for assembly or as a paper template.

    For classroom solids such as cylinders, cones and fraction sets, use the math manipulatives generator.

    Catalogue

    Every shape in the list

    FamilyShapes
    Platonic (5)Tetrahedron, Cube, Octahedron, Dodecahedron, Icosahedron
    Archimedean (13)Truncated tetrahedron, Cuboctahedron, Truncated cube, Truncated octahedron, Rhombicuboctahedron, Truncated cuboctahedron, Snub cube, Icosidodecahedron, Truncated dodecahedron, Truncated icosahedron, Rhombicosidodecahedron, Truncated icosidodecahedron, Snub dodecahedron
    Catalan (13), the Archimedean dualsTriakis tetrahedron, Rhombic dodecahedron, Triakis octahedron, Tetrakis hexahedron, Deltoidal icositetrahedron, Disdyakis dodecahedron, Pentagonal icositetrahedron, Rhombic triacontahedron, Triakis icosahedron, Pentakis dodecahedron, Deltoidal hexecontahedron, Disdyakis triacontahedron, Pentagonal hexecontahedron
    StarSmall stellated dodecahedron, Great stellated dodecahedron, Great dodecahedron, Stella octangula (two tetrahedra)
    Prism family (3 to 20 sides)Prism, Antiprism, Bipyramid, Trapezohedron

    Coordinates are computed, not typed in: Platonic and Archimedean solids come from their symmetry groups (Wythoff’s construction), Catalan solids are their duals, and Conway results are brought to canonical form so every face is flat. Every shape is checked with Euler’s formula, V − E + F = 2. Star polyhedra break that rule (the small stellated dodecahedron gives −6), so the table shows the star’s own counts and the model is its outer surface.

    Styles

    Styles and what they suit

    StyleGood forPrints
    SolidDisplay pieces, paperweights, dice-like shapes; two colours by face typeOn its largest face, with no supports for most shapes
    Hollow shellLight, quick prints; a hole for draining or a lightThe inside ceiling bridges; keep walls 1.6 mm or more
    WireframeOrnaments and teaching edgesShort struts bridge; steep shapes print best
    Face framesLamps and hanging ornaments with windowsLike a shell with windows; for battery or LED lights only
    Snap-together kitClassrooms: build, take apart, count facesEvery plate and clip flat, no supports
    Hinged netFolding demonstrationsFlat in one piece where the net fits your bed

    Kits

    How the snap-together kit works

    Each face prints flat, outer side down, with sloped edges so neighbouring plates meet flush. Pockets on the inside take the pegs of small clips. Each clip is bent to the exact dihedral angle of its edge, and its angle is in its name in the 3MF. Shapes with two or three different angles get two or three clip types.

    • Numbers: every plate carries its number, and beside each edge the number of the face that joins it. The SVG net shows the same numbers.
    • Fit: push a clip into one plate, then hinge the second plate onto it. If it is tight, raise the peg clearance by 0.05 mm.
    • Small shapes: edges too short for a clip are left out; glue those, and the advice says how many.

    Printing

    Printing tips

    • Overhangs: the advice lists the steepest overhang. Most printers manage about 50° without supports; star shapes and corner-down solids need supports or a flat base.
    • Wireframes: keep struts at least three nozzle widths thick. Flat struts at the top print as bridges.
    • Lamps: use battery tea lights or low-power LEDs only, never a candle or a hot bulb. PETG copes with warmth better than PLA.
    • Colours: load the 3MF to get each face type as its own part, ready for a multi-colour printer.
    • Small parts: clips and small kits are not for children under 3.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview to check. Kits and nets are laid out on your bed, over several plates if needed.

    Which shapes are not here?

    Johnson solids and most of the 53 non-convex uniform polyhedra are not in the list yet. Conway operators reach many more shapes from any seed.

    Why does the star show V − E + F = −6?

    A small stellated dodecahedron has pentagram faces that pass through each other, so it is not shaped like a ball and Euler’s formula gives −6. Its outer surface, which is what prints, still gives 2.

    Can I sell what I print?

    The designs you make are yours, and these shapes are centuries-old geometry anyone may make. Kits are small parts, so check toy-safety rules before selling them for children.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-13. Community posts are one maker's experience, not a specification.

    1. Archimedean solid Wikipedia
    2. Catalan solid Wikipedia
    3. Kepler–Poinsot polyhedron Wikipedia
    4. Wythoff construction Wikipedia
    5. Conway notation for polyhedra George W. Hart
    6. Canonical polyhedra George W. Hart
    7. polyHédronisme (Conway operator code, MIT licence) Anselm Levskaya
    8. Dihedral angle Wolfram MathWorld
    9. 16 CFR Part 1501: small parts for children under 3 eCFR, US Government
    10. PETG Prusa Research