Free generator · Runs in your browser

Bolt and nut generator Threads that turn.

Generate printable ISO metric bolts, nuts, thumb screws and threaded rods from M3 to M20, with a printing clearance so they screw together.

  • Free and privateNothing to install
  • Bolts, nuts, rodsPlus thumb screws
  • ISO profile60° threads, standard hex sizes
  • Ready to sliceSTL and 3MF files

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Thread

Pitch
0.150 mm

Part

Make
30.0 mm
0.0 mm

Leave a smooth shank under the head for stronger clamping.

22.0 mm
8.0 mm

Colours

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    Printable threads that actually screw together

    The generator builds the ISO metric thread profile, a 60° thread with flat crests and roots, then adds a clearance so printed parts mate despite plastic squish. Choose a size, a part and a clearance, and print vertically.

    Reference

    ISO metric sizes

    SizeCoarse pitchNut across flatsNut heightHead height
    M30.55.52.42.0
    M40.773.22.8
    M50.884.73.5
    M61.0105.24.0
    M81.25136.85.3
    M101.5168.46.4
    M121.751810.87.5
    M162.02414.810.0
    M202.53018.012.5

    Nuts follow ISO 4032 and heads ISO 4017. Older DIN 934 nuts use 17 mm (M10) and 19 mm (M12) across flats.

    Printing

    Print settings for threads

    • Vertical axis: threads printed standing are far stronger and smoother than lying down.
    • Fine layers: about a sixth of the pitch, and no more than 0.16 mm.
    • Walls: 3–5 perimeters, so the thread is solid plastic.
    • Size: M6 and up with a pitch of 1 mm or more prints reliably on a 0.4 mm nozzle.
    • Clearance: 0.1–0.2 mm per side is typical; measure yours with the tolerance test.

    Questions, answered

    Will a printed nut fit a metal bolt?

    Usually, with clearance around 0.1–0.15 mm. Small sizes (M3–M5) are better served by heat-set inserts or captive metal nuts.

    Why is my printed thread stiff?

    Raise the clearance by 0.05 mm, check for elephant’s foot on the first threads, and make sure the axis was vertical.

    Are the threads right-handed?

    Yes, standard right-hand threads that tighten clockwise.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-07. Community posts are one maker's experience, not a specification.

    1. ISO metric screw thread Wikipedia
    2. DIN EN ISO 4032 hexagon nuts fasten.it
    3. ISO 4017 hexagon head screws BOLTS
    4. 3D printing threads and screws Sovol
    5. 3D printing threads Snapmaker