The method
How to make brick name letters
Type a name and the generator turns each letter into a flat brick piece: studs on top, stud holes underneath, sized for the common 8 mm stud system. The brick font is our own 5 × 7 stud alphabet, like a brick mosaic, so letters sit flush beside ordinary bricks. Typeface blocks snap any of our typefaces to the stud grid, and typeface outline keeps the letter shapes and adds studs wherever they fit.
- Print the fit test and set the stud and hole sizes from the best tiles.
- Type the name, pick a style, a height in studs and a thickness in plates.
- Add a base plate to stand the name on a shelf, or leave it off to press the letters onto a plate you have.
- Download and print everything flat, studs up, with no supports.
Sizes
The 8 mm stud system
| Measure | Size | Used for |
|---|---|---|
| Stud pitch | 8 mm | Stud spacing and the grid every letter snaps to |
| Plate height | 3.2 mm | Letter thickness steps and the base plate |
| Brick height | 9.6 mm | Three plates |
| Stud | 4.9 mm across, 1.8 mm tall | The studs on top (size adjustable) |
| Play | 0.1 mm each side | A 1-stud piece is 7.8 mm, so neighbours sit 0.2 mm apart |
These are measured sizes of real bricks. Moulded bricks vary by a few hundredths of a millimetre; a 3D printer varies more, which is why the stud and hole sizes are adjustable.
Fit test
Getting the clutch right
A printer’s holes come out a little small and its studs a little big, by different amounts on every machine. The fit test prints five hole tiles and five stud tiles, each 0.1 mm apart and marked with 1 to 5 dots. Three dots is your current setting.
- Hole tiles (smooth top): press each onto a real brick. Pick the one that grips without forcing.
- Stud tiles: press a real brick onto each and pick the best clutch.
- Set the sizes on the Fit step to the winning tiles, then make the letters.
Printing
Printing tips
- Orientation: flat, studs up. The stud holes open onto the bed, so nothing needs support.
- Layers: 0.2 mm or finer. Studs are only 1.8 mm tall, so finer layers make them rounder.
- First layer: elephant’s foot shrinks the stud holes. Lower first-layer flow, or use a bigger hole size.
- Colours: every letter is its own object in the 3MF, so a multi-material printer can print a rainbow name at once.
- Small parts: letters and bricks aren’t for children under 3.
Questions, answered
Is it free to use?
Yes. No account, no watermark, no limits.
Will they fit the bricks I have?
They’re sized for the common 8 mm stud system used by most building-brick brands. How tightly they grip depends on your printer, so print the fit test first and set the stud and hole sizes from it.
Which style should I pick?
The brick font and typeface blocks are made of whole studs, so they line up with other bricks and every square has a stud and a hole. The brick font is drawn for studs and reads best; typeface blocks can look rough on diagonals below about 8 studs. Outline letters look like the typeface but only get studs where one fits, and thin letters may have no holes to grip with.
Can I sell what I make?
The typefaces are open-licensed and allow making physical products. Describe them as fitting 8 mm stud bricks, and don’t use a brick maker’s brand name for your product.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-09. Community posts are one maker's experience, not a specification.
- Dimensions: general considerations Robert Cailliau