Free tool · Runs in your browser

3MF to STL converter Every part, every plate.

Convert 3MF files from Bambu Studio, Orca Slicer, PrusaSlicer and Cura to STL, as one file or one STL per object. It runs in your browser, so nothing is uploaded.

  • PrivateConverted on your device
  • Project filesBambu and Orca 3MF
  • Split optionOne STL per object
  • Also OBJ and STEPSame tool, any output

Drop a file anywhere here · Drag to rotate · Scroll or pinch to zoom

Size
—
Volume
—
Weight
—
Fits
—

File

Size and orientation

STL and OBJ files don’t say their units. If the model looks 25 times too small, it was made in inches.

100 %
Turn 90°

Mesh check

Watertight
—
Separate bodies
—
Triangles
—
Surface area
—
Overhang area
—

Weight and cost

2
15 %
Estimated weight
—
Filament
—
Material cost
—
If printed solid
—

An estimate from walls and infill; your slicer gives the exact figure. How it’s worked out

Download

Download as

For files with several objects or plates. 3MF always keeps them as parts.

Off keeps the original position.

Open a file to convert it.

Your file is read on this device and is never uploaded.

Advertisement

The method

From 3MF project to STL

A 3MF is a zip package with the model as XML inside. This tool reads every object in the build, applies each one’s position, and writes them out as STL: one combined file, or one STL per object in a zip.

  1. Open the 3MF. Projects from Bambu Studio and Orca Slicer, which keep objects in separate files inside the package, are supported.
  2. Choose one file or one per object.
  3. Download. Objects keep the positions they had on the plate unless you centre them.

Trade-offs

What STL leaves behind

STL stores only triangles. Converting from 3MF drops:

  • Colours and filament assignments. Keep the 3MF if you need them, or download a 3MF from here, which keeps each part’s colour.
  • Print settings saved in slicer projects.
  • Units: the STL is written in millimetres, which is what slicers expect.

Mesh check

What the checks mean

  • Watertight: every edge is shared by exactly two triangles facing the same way. Slicers need this to know what is inside the part.
  • Open edges are holes in the surface; non-manifold edges are shared by three or more triangles; flipped faces point inward. Most slicers repair small problems on import, but a clean mesh slices predictably.
  • Separate bodies are pieces that don’t touch. Several bodies in one STL is normal for print-in-place parts and plates of parts.
  • Overhang area is surface facing down at more than 45° from vertical, not counting the face on the bed. It’s a rough guide to where supports may be needed.

Estimates

How the weight is worked out

A printed part is a solid skin plus sparse infill. The tool takes the surface area times the wall thickness (walls × 0.42 mm lines) as the skin, fills the rest of the volume at your infill percentage, and multiplies by the material’s density. Your slicer knows the real toolpaths, so treat this as a quick estimate.

MaterialDensitySource
PLA1.24 g/cm³Prusament PLA data sheet (ISO 1183)
PETG1.25 g/cm³Polymaker PolyLite PETG
ABS1.04 g/cm³Polymaker PolyLite ABS
ASA1.13 g/cm³Polymaker ASA
TPU 95A1.22 g/cm³Polymaker PolyFlex TPU95
PC1.19 g/cm³Polymaker PolyLite PC
Nylon (CoPA)1.12 g/cm³Polymaker PolyMide CoPA
PLA-CF1.29 g/cm³Polymaker PLA-CF

Densities vary by brand and colour, by a few percent. Check your filament’s data sheet for its exact value.

Questions, answered

Does it work with Bambu Studio 3MF files?

Yes. Bambu Studio and Orca Slicer store objects in separate model files inside the 3MF; the tool follows those links and places each object where it sat on the plate.

Can I get one STL per object?

Yes: turn on “One file per object” and the download is a zip with an STL for each.

Is anything uploaded?

No. The conversion runs in your browser.

Sources

Print advice is a starting point drawn from these references, checked on 2026-11-07. Community posts are one maker's experience, not a specification.

  1. 3MF Core Specification 3MF Consortium
  2. STL (STereoLithography) File Format Family Library of Congress
  3. Prusament PLA technical data sheet Prusa Research
  4. Technical data at a glance (densities) Polymaker