Free generator · Runs in your browser

Chainmail generator Fabric off the bed.

Make print-in-place chainmail: square or hex ring mail, scale mail and tile fabric, cut to a sheet, a shape, a coaster, a bracer or a sleeve. It prints flat, already linked, with no supports.

  • Private by designNothing leaves this device
  • Four patternsRings, hexes, scales, tiles
  • Fits your bedBig sheets split into panels
  • Ready to sliceSTL, 3MF or one STL per colour

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Pattern

Pattern
Tile shape

Ring mail is open and light. Tile fabric is solid plates joined by links. Scale mail hangs each scale from the two above it.

Shape

Cells are kept only where they fit wholly inside the outline, so the edge row is always clean.

Size by
Outline
110 mm

The longer side of the outline.

100 mm

Measure round the arm where the band sits, with a soft tape or a strip of paper.

60 mm
Closure
5 mm

Added to your measurement so the band isn’t tight. Snap holes give about 5 mm either way.

Measure round your pet’s collar. The point hangs about half that length.

Widths are the arm measurements you want to cover. Eyelets down both sides lace it closed.

150 mm

Eyelets round the rim take a drawstring.

Cells

12.0 mm

Raised automatically if the links would crowd each other.

1.6 mm

Link and frame thickness. Thicker is stronger and stiffer.

0.350 mm

The gap kept between every link and cell while printing. Use your tolerance-test result; 0.35 mm suits most tuned printers.

1.2 mm
1.0 mm

Extra room for each link to slide in its window. More drapes better; less feels firmer.

Emblem

Centre emblem
Emblem tile
1.2 mm

Two or three letters read best.

Typeface

An emblem joins several cells in the middle into one solid tile with raised initials, a heart or a star.

Colours and view

Colours
Preview
60 mm

An illustration only: each cell stays rigid and the joints bend. Downloads are always flat.

Used to split big sheets into panels when no printer is chosen below the preview.

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    How print-in-place chainmail works

    Each cell is a flat ring or tile on the bed. Where two cells meet, each cell’s edge rises into a small arch, and an upright link stands across the gap: its bottom bar runs under both arches, its legs stand in the cells’ windows and its top bar crosses over both arches. Nothing touches while it prints, so the sheet comes off the bed already linked.

    1. Pattern: ring mail, hex fabric, scale mail or tiles.
    2. Shape: a sheet, a shape, or a coaster, bracer, bandana, sleeve or pouch.
    3. Cells: size, wire, clearance and looseness.
    4. Download and print flat, with no supports.

    Patterns

    Which pattern to choose

    PatternFeels likeGood for
    Square ring mailOpen, light, bends both waysSheets, patches, cosplay panels
    Hex ring fabricDenser, drapes in every directionCoasters, pouches, rounded shapes
    Scale mailScales hang from the row above; drapes outward more easilyBracers, shoulder pieces, dragon costumes
    Tile fabricSolid plates; firmer, with room for an emblemCuffs, bracelets, name patches

    Every pattern keeps the same clearance between parts. The cell size is raised for you if thicker wire or a bigger clearance would make the links crowd each other.

    Sizes

    Measuring for a bracer, bandana or sleeve

    You measureIt sets
    Round the wrist or forearm, where the band sitsBand length: the middle snap hole meets at this plus the room to move
    Band widthHow many rows of cells
    Round your pet’s collarThe bandana’s top edge
    Arm at the top and bottom of a sleeveThe panel’s two widths

    There are no standard sizes here: measure with a soft tape or a strip of paper. Snap bands have three holes about 5 mm apart, so they adjust a little.

    Printing

    Printing tips

    • No supports, no brim inside the sheet. The arch openings rise steeper than 45° and the link tops are short bridges.
    • First layer: a squashed first layer (elephant’s foot) can fuse links to cells. Turn on elephant foot compensation and slow the first layer.
    • Clearance: print the tolerance test first; if joints stick, add 0.05 mm.
    • Material: PLA for display pieces; PETG bends further before it cracks, for things you wear.
    • Big sheets come as panels with joiners, one plate each. Join them after printing.
    • Not for children under 3: links and studs are small parts.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview. A sheet bigger than its bed is split into panels on separate plates, with joiners on the last plate.

    Has every pattern been print-tested?

    The files are checked in software: every part is a closed shell, parts keep the chosen clearance from each other, and nothing overhangs past 45° except short bridges. Printers differ, so print a small sheet first and adjust the clearance.

    Can I sell what I print?

    The designs you make are yours. Text uses fonts under the SIL Open Font License or Apache 2.0, which allow it. We make no claims beyond that, so check anything else you add.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-13. Community posts are one maker's experience, not a specification.

    1. Mail (armour) Wikipedia
    2. Scale armour Wikipedia
    3. 3D printing support structures: the ultimate guide All3DP
    4. Design the clearance and tolerance UAL Creative Computing Institute
    5. Elephant foot compensation Prusa Research
    6. Color change Prusa Research
    7. Advanced filament guide Prusa Research
    8. 16 CFR Part 1501: small parts for children under 3 eCFR, US Government