Free generator · Runs in your browser

Cribbage board generator Fifteen two, fifteen four.

Make a personalised cribbage board for 2, 3 or 4 players: classic, continuous, round or shaped like 29, with your family name, colour tracks, tapered pegs and a place to keep them.

  • Private by designNothing leaves this device
  • Five layoutsClassic to travel box
  • No supportsPrints flat, split to fit
  • Ready to sliceEach player their own colour

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Board

Layout

Two rows of 30 holes a player: out along one row and back along the other, twice round for 121.

One continuous track of 120 holes a player that winds back and forth: once round for 121.

The tracks spiral in from the rim to a finish hole near the centre.

The track draws the number 29, the best hand in cribbage.

A small board on a box: 60 holes a player, twice round, with the pegs and a deck of cards inside.

Players
Game to
6.50 mm

Centre to centre along the track. Groups of five have an extra gap.

11.0 mm
Edge
8 mm

Track

Tracks and lettering

Flush inlay: each player’s track is its own colour on a multi-material printer. Raised: two colours with one colour change. Engraved: one colour.

Numbers
3.2 mm

Height of the numbers and labels. Below 3 mm they need a 0.4 mm nozzle and fine layers.

S after 90 points and SS after 60 (games to 121 only).

At the start and on every turn.

5

A short row for a third peg that counts games won. 0 leaves it off.

Personalise

Across the middle or along the edge. Leave empty for none.

Up to 3 letters, set large beside the name.

A spade, heart, diamond and club, drawn as simple shapes.

Typeface
18 mm

Pegs

Pegs
3.5 mm

The middle of the tapered shaft. The hole is this plus the clearance.

Peg top
Pegs per player

Pegs are small and get lost.

Measure your pegs with calipers. Many metal pegs are 1/8 inch (3.18 mm), but check yours.

0.20 mm

Added to the peg size to make the hole.

6.0 mm

Storage and mounting

Peg storage

A round board has no straight edge for the door, so its pegs go in the separate box.

The box is sized for one deck beside the pegs.

Measure your deck, in its box or out, as you will store it.

Parts join with dovetail tabs underneath. Pick your printer below the preview.

Four round recesses underneath.

10 mm

For a board that lives on the wall.

Colours

Preview

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    How to make a personalised cribbage board

    Pick a layout and the number of players, and the generator lays out every track in groups of five, adds the start and finish holes, the skunk lines and the numbers, then sizes the pegs to the holes and splits a long board to fit your printer.

    1. Pick the layout, the players and the game length.
    2. Choose the finish: a flush colour inlay, raised or engraved.
    3. Personalise it: a name, a date, a monogram and card suits.
    4. Choose the pegs and where they are stored.
    5. Download and print flat, with no supports.

    Rules

    What the board has to show

    FeatureOn the boardWhy
    Game121 points, or 61 for a short gameThe first player to reach the game hole wins.
    Holes120 a player (a continuous track), or 60 gone round twiceOne hole for every point before the game hole.
    GroupsEvery 5 holes, with streets of 30Counting in fives is quicker at the table.
    Start and finishTwo start holes, and the game hole (the 121st)Two pegs leapfrog, so the last score is always shown.
    Skunk line (S)After hole 90A loser on 61–90 points is skunked.
    Double skunk (SS)After hole 60A loser on 60 points or fewer is double skunked.
    Games wonA short row for a third pegCounts games in a match.

    House rules on skunks vary: some players use them, some do not, and stakes differ. A short game to 61 has no skunk lines on this board.

    Options

    Layouts and sizes

    LayoutHoles a playerTypical size (2 players, 6.5 mm spacing)
    Classic long board60, twice roundAbout 245 × 70 mm
    Continuous track120, once roundAbout 305 × 90 mm, in 2 parts on a 256 mm bed
    Round spiral120About 190 mm across
    29 board120About 250 × 235 mm
    Travel box60, twice roundAbout 155 × 105 mm, sized for a deck

    Boards grow with the hole spacing and with each extra player. Pegs and holes follow the peg size: the hole is the peg plus the clearance.

    Pegs

    Pegs that seat firmly

    • Printed pegs taper from 0.3 mm wider than the hole under the head to 0.5 mm narrower at the tip, so they wedge in and stay put.
    • Bought pegs: measure the shank with calipers and enter it. Many metal pegs are 1/8 inch (3.18 mm), but sizes vary.
    • Test first: print the first five holes of a track and one peg. Adjust the clearance by 0.05 mm until the fit is right.

    Printing

    Printing tips

    • Flat, top up, no supports. The cavity roof and keyhole slots are short bridges.
    • Inlay: each player’s track is its own object in the 3MF, so it can take its own filament.
    • One nozzle: choose Raised and add a colour change at the board’s thickness.
    • Small numbers: use a 0.4 mm nozzle or finer and 0.12–0.16 mm layers for the top.
    • Parts: long boards split across the straights; glue the dovetail joints.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview. Classic and continuous boards split into parts that fit the bed; the round, 29 and travel boards print in one piece, so check the size shown.

    Can I sell boards I print?

    The designs you make are yours, and cribbage is a traditional game anyone may make. The typefaces are open-licensed, which allows making physical products. Pegs are small parts, so check toy-safety rules before selling for children.

    Which rules does the board follow?

    The holes, game hole and skunk lines follow the American Cribbage Congress glossary and the published rules listed below. Skunks are optional in many homes: turn the lines off if you do not play them.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-13. Community posts are one maker's experience, not a specification.

    1. Learn to Talk Cribbage (glossary) American Cribbage Congress
    2. Cribbage: how to play Bicycle Cards
    3. Cribbage Pagat (John McLeod)
    4. Cribbage Wikipedia
    5. Playing Card Dimensions PrintNinja
    6. Color change Prusa Research
    7. SIL Open Font License SIL International