Free generator · Runs in your browser

Molecule model generator Chemistry you can hold.

Type a compound, such as caffeine, aspirin or glucose, and print its real 3D shape: ball-and-stick or space-filling, in two halves that need no supports, or as a classroom kit of balls and sticks. 3D shapes from PubChem.

  • Private by designOnly a look-up is sent
  • Real 3D shapesFrom PubChem, public domain
  • No supportsHalves and kits print flat
  • Ready to sliceEach element its own part

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Molecule

Molecule from

These shapes ship with the page, so they work offline.

Press Enter or Look up. Only what you type is sent, to PubChem at the U.S. National Library of Medicine, which returns the compound’s 3D shape.

Or open one from your computer. Files are read on this device and never uploaded. XYZ files carry no bonds, so bonds are guessed from distances.

Leave empty to use the molecule’s own name. Used on the plaque or stand and in the file name.

Style

Style

A kit is always ball and stick.

8.0 mm per Å

How many millimetres each ångström becomes. A carbon–carbon bond is about 1.5 Å, so 10 mm per Å makes it 15 mm long.

25 % of atom size

Each ball as a share of its atom’s van der Waals radius.

0.15 Å

Radius in ångströms, scaled like the atoms. Sticks never go below 2 mm across, so they print.

Double and triple bonds

Print as

Print as

Cut in half along the plane that crosses the most atoms. Each half prints on its flat face with no supports, and pegs line the halves up for gluing. Flat molecules such as benzene print in one piece, lying flat.

One ball per atom, with holes at the real bond angles, and a stick per bond. Balls are grouped on plates by colour. Up to 80 atoms.

One piece with a small flat underneath. It needs supports under the atoms that hang out.

0.20 mm

Extra room around each peg. 0.2 mm suits most printers; go up if pegs are too tight, down if loose. A test print of one ball and one stick is worth it.

Extras

Label

The name and formula, raised on top. The stand has a post with a peg that fits a hole in the model.

Typeface

A loop on the atom farthest out. Best on small, flat molecules.

Colours

Standard model colours (CPK). Nitrogen is a lighter blue than usual so it shows on the blue preview.

Other elements use their usual model colours.

Preview

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    How to print a molecule model

    Type a compound’s name and the generator fetches its 3D shape from PubChem, the free chemistry database run by the U.S. National Library of Medicine. It then builds a model that prints without the forest of supports a ball-and-stick download usually needs.

    1. Choose the molecule: a built-in one, a look-up by name or PubChem number, or your own SDF, MOL or XYZ file.
    2. Pick a style and a scale. 8 to 12 mm per ångström suits a desk model.
    3. Choose how to print it: two halves to glue, a kit to build, or whole.
    4. Download. Each element is its own part in the 3MF, ready for its own filament.

    PubChem has no single 3D shape for some compounds, such as salts and metals. Then the 2D drawing is used, lying flat, and the page tells you so.

    Options

    Styles and print modes

    OptionWhat you getSupports
    Ball and stickBalls a quarter of each atom’s size, joined by sticks; double and triple bonds as two or three thinner sticksNone in halves or kit
    Space-fillingEach atom at its full van der Waals size, overlapping like the real electron cloudNone in halves
    Sticks onlyBonds as sticks with small joints, the way chemists sketch in 3DNone in halves
    Two halvesCut where the plane crosses the most atoms, with peg holes where the atoms are large enoughNone; atoms well away from the cut may need a little
    Classroom kitA ball per atom with holes at the bond angles, a stick per bond, plates by colourNone
    WholeOne piece with a small flat underneathNeeded
    ElementColourRadius (Å)
    HydrogenWhite1.20
    CarbonDark grey1.70
    NitrogenLight blue1.55
    OxygenRed1.52
    SulfurYellow1.80
    ChlorineGreen1.75
    PhosphorusOrange1.80

    Radii from Bondi (1964); Mantina et al. (2009) for main-group elements Bondi did not list. Elements with no published radius use 2.0 Å.

    Printing

    Printing tips

    • Halves: print both flat side down, push the pegs into one half, add a little glue and press the other half on.
    • Kit: print a ball and a stick first to check the fit, then change the peg clearance if needed. Each plate holds one colour.
    • Small models: sticks never go below 2 mm across. At small scales, hydrogens and sticks are fragile; 0.15 mm layers help.
    • Big molecules: up to 200 atoms. Proteins and other large molecules are better as surface models than ball-and-stick prints.
    • Small parts: kit balls, sticks and pegs are small parts, not for children under 3.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview. If the model is too big, lower the scale. Kit pieces fill as many plates as needed, one colour per plate.

    Can I sell models I print?

    The models you make are yours. Molecule shapes are facts of nature, and PubChem’s data is in the public domain. The label typefaces are open-licensed, which allows making physical products. Kit pieces are small parts, so check toy-safety rules before selling for children.

    What is sent over the internet?

    Only a look-up: the name or number you type goes to PubChem, which returns the 3D shape. Built-in molecules and files you open never leave this device.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.

    1. PUG REST: programmatic access to PubChem National Center for Biotechnology Information (NCBI)
    2. Programmatic access and usage policy (5 requests a second) NCBI PubChem
    3. Citation guidelines (PubChem data is public domain) NCBI PubChem
    4. Kim S. et al., PubChem 2025 update, Nucleic Acids Research 53 (D1) Oxford University Press
    5. Bondi A., van der Waals volumes and radii, J. Phys. Chem. 68, 441 (1964) American Chemical Society
    6. Mantina M. et al., Consistent van der Waals radii for the whole main group, J. Phys. Chem. A 113, 5806 (2009) American Chemical Society
    7. Cordero B. et al., Covalent radii revisited, Dalton Trans. 2832 (2008) Royal Society of Chemistry
    8. Jmol colors (CPK convention) Jmol project
    9. Sodium chloride: lattice constant 564.02 pm Wikipedia
    10. SIL Open Font License SIL International