How it works
Colour a model for a multi-colour printer, in the browser
A printer with a filament changer, or several tool heads, can print one model in many colours, but the colours have to be painted onto the model first. Usually that means a slicer installed on your computer. This tool paints in the browser instead: on a school or work computer, a tablet, or anywhere you can’t install software. Nothing is uploaded.
- Open an STL, OBJ or 3MF, or start with the sample snowman. A 3MF keeps the colours it already has.
- Set up your filaments. Up to 16, each with a colour picker or a colour from the filament list.
- Paint. Use the brush and bucket on the model, or colour height bands and the whole model from the form.
- Check it from every side with the view buttons. Undo and redo as you go.
- Download a 3MF for your slicer, a coloured 3MF, or one STL per colour.
Tools
Brush, bucket, bands and finer triangles
| Tool | What it does | Works with |
|---|---|---|
| Brush | Paints every triangle under the circle that faces you. The size is on screen, so zoom in for detail. | Mouse, pen or touch |
| Bucket fill | Fills the connected area you click, up to edges sharper than the feature angle, and (if you choose) up to other colours. | Mouse, pen or touch |
| Eraser | Paints back to the base filament. | Mouse, pen or touch |
| Height band | Colours everything between two heights from the bed, with an exact line. Good for simple layer colours. | Keyboard, mouse or touch |
| Whole model | Colours the whole model in the chosen filament. | Keyboard, mouse or touch |
| Finer triangles | Splits long triangle edges, so the brush follows smaller shapes. Up to 1 million triangles. | Keyboard, mouse or touch |
- Triangles are the pixels. Paint goes on whole triangles. A flat face made of two big triangles paints as two pieces; use finer triangles first to paint shapes on it.
- The brush paints what you see. Faces hidden behind others are left alone, so turn the model to reach them.
- Feature angle. The bucket compares each pair of neighbouring faces. At 0–5° it stays on one flat face; at 30° it fills smooth curves but stops at sharp corners.
- Exact height lines cut the triangles that cross a band’s heights, so the colour changes at exactly that height, like a filament change at a layer.
Downloads
Which file to download
| Download | What is inside | Open it in |
|---|---|---|
| 3MF for slicers | Your model, with a paint code on every triangle naming its filament, saved in the two attribute names slicers use (slic3rpe:mmu_segmentation and paint_color). | Slicers that read painted 3MF files. The model opens painted; set the filament colours in the slicer. |
| Coloured 3MF | A list of your filaments as 3MF base materials, and a material on every triangle (pid and p1). | Design programs and slicers that read 3MF colours |
| Zip of STLs | One closed solid per colour: a skin of the colour depth over a core in the main colour. | Any slicer. Load all the files together and give each its filament. |
- Filament numbers. Filament 1 here is filament 1 in your slicer. A printer profile with fewer filaments than you used may show the extra colours as the first filament; add filaments in the slicer.
- Colours in the slicer. The 3MF for slicers lists your filament colours too, but most slicers use the filaments set up in the slicer. Match them there.
- The STLs fit back together. Every file keeps the same position. Load them all at once, as parts of one object, and give each its filament.
Printing
Printing the colours
- With a filament changer or several tool heads, open the 3MF for slicers. Each colour prints where you painted it.
- Without a filament changer, height bands still work: change the filament by hand at each band’s height, using your slicer’s pause or colour change at a layer. Colours side by side on one layer need a filament changer.
- Each colour change wastes some filament as the nozzle purges. Fewer colours on a layer, and fewer layers with many colours, mean less waste and a faster print.
- Small painted spots under about two nozzle widths may not print. Paint details a little larger than you want them.
Accessibility
Painting without a mouse
The brush, bucket and eraser need a pointer: a mouse, a pen or a touch screen. We say so plainly rather than offer a keyboard brush that would be hard to aim. Everything else works with the keyboard alone: choosing filaments and colours, height bands, filling the whole model, finer triangles, undo and redo, the view buttons, and every download. With the preview focused, the arrow keys turn the model and + and − zoom. Each action is announced, and the preview’s description lists the filaments on the model.
Limits
What this tool doesn’t do
- Up to 3 million triangles per model, and 1 million after making triangles finer.
- Paint is per triangle. The brush doesn’t cut triangles along its edge as some slicers do; make triangles finer for smoother borders. Painting in a 3MF that cut triangles into pieces is kept, as real triangles.
- No textures or photos. It doesn’t turn an image or texture map into paint.
- One model at a time. Parts of a 3MF are painted together and saved as separate objects.
- Slicer settings such as filament types, purge amounts and support painting are not saved.
Questions, answered
Is it free?
Yes. Every tool and download is free, with no account and no watermark.
Is my file uploaded?
No. The model is opened, painted and saved by your browser, on your device. Nothing is sent to 3Dprintsy or anyone else.
Will it fit my printer?
The model keeps its size. The size shows under the preview, in millimetres; check it against your printer’s bed.
Can I sell what I make?
The painted files are made from your model, so what you may do with them depends on the model’s own licence. 3Dprintsy claims nothing over the files this tool makes.
Why does the brush paint big patches?
Paint covers whole triangles, and flat areas of a model are often a few big triangles. Use finer triangles, then paint again.
My slicer shows only one colour. Why?
Check that the printer in your slicer has as many filaments as you painted with. If it has fewer, add filaments and the painting appears. If the slicer doesn’t read painted 3MF files, try the coloured 3MF or the zip of STLs.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.
- 3MF Core Specification: triangles, properties and base materials 3MF Consortium
- 3MF Materials and Properties Extension 3MF Consortium
- TriangleSelector.cpp: serialize, deserialize and perform_split (version 2.6.0) PrusaSlicer source code, GitHub
- 3mf.cpp: painted triangle attribute and painting version (version 2.6.0) PrusaSlicer source code, GitHub
- bbs_3mf.cpp: paint_color attribute and colours of other 3MF files Bambu Studio source code, GitHub
- Multi material painting Prusa Research knowledge base
- Insert pause or custom G-code at layer Prusa Research knowledge base