Free generator · Runs in your browser

SVG to STL converter Every colour, its own part.

Turn SVG logos and images into 3D printable models, as a single silhouette or a multicolour print with each colour ready for its own filament.

  • Private by designFiles never leave this device
  • Up to six coloursMosaic or raised
  • Clean outlinesSmoothing and speck filter
  • Ready to sliceMulti-part 3MF and STL

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Artwork

Colours

Make
4.0

Colours in the artwork are grouped into this many filaments.

Colours are

A rounded plate behind the shape, in its own colour.

2.0 mm
6.0 mm
6.0 mm

Off makes light areas stand out instead.

2.0 mm
2.5 mm
Outline

Size

80.0 mm
2.4 mm
0.8 mm
1.0
1.00 mm²

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    Convert an SVG or image to STL

    Drop in a logo, icon or drawing. The generator traces its shapes on your device and extrudes them into a solid model, either as a single silhouette or with every colour as its own printable part.

    1. Add your artwork. SVG files are drawn by your browser; PNG, JPG and WebP work too.
    2. Choose colours. Group the artwork into 2–6 filament colours, or make a one-colour silhouette.
    3. Size it and download a multi-part 3MF, STL, or one STL per colour.

    Colour

    Multicolour prints: mosaic or raised

    StyleLooks likePrinter
    Flush mosaicSmooth, flat face with colours side by sideMulti-material (AMS, MMU, tool changer)
    Raised on a baseColours stand on a base in the main colourBase colour on any printer; extra colours need a filament change or multi-material

    Colours are found by grouping similar pixels (k-means clustering), so gradients become bands. Flat-colour art gives the cleanest result.

    Artwork

    Getting clean results

    • Use flat colours. Photos and gradients turn into many small regions.
    • Keep details printable. Lines thinner than about 0.8 mm at the final size will not print.
    • Only upload what you may use. Logos and characters are often trademarked or copyrighted.

    Questions, answered

    Is my file uploaded?

    No. The artwork is traced on your device and never leaves it.

    Why are there colours I did not expect?

    Anti-aliased edges and gradients create in-between shades. Lower the number of colours, or raise smoothing and the speck filter.

    Which slicers read the multicolour 3MF?

    The 3MF stores each colour as a named part of one object, which PrusaSlicer, Bambu Studio and OrcaSlicer load ready for filament assignment. Use “STL per colour” for slicers that prefer separate files.

    Can I convert a Spotify Code?

    Yes: save the Spotify Code image from the app and use One colour mode.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-07. Community posts are one maker's experience, not a specification.

    1. Multicolor printing with a Prusa: beginner’s guide Prusa Research
    2. 3MF specification 3MF Consortium
    3. Modeling with 3D printing in mind Prusa Research