Free generator · Runs in your browser

Letter bead generator Spell it out, bead by bead.

Make letter beads for friendship bracelets, letter charms and collar slide letters. Pick a shape, size the hole to your cord or strap, and print with no supports.

  • Private by designNothing leaves this device
  • Five shapesSquare, round, heart, hexagon, letter
  • No supportsHoles shaped to print cleanly
  • Ready to sliceOne object per bead

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Beads

One bead per character. Spaces become plain spacer beads, if you want them (under Bracelet).

Letters
Bead shape
12 mm

Height of the bead’s face; for letter charms, the letter’s height.

7.0 mm

Grows by itself if the hole needs more room.

Lettering

Letters
0.8 mm
0.6 mm
0.80 ×

How much of the face the letter fills.

Letter charms are cut in the shape of the letter itself, with the hole running through it.

Typeface

Hole

Hole for
1.0 mm

Measure your cord, elastic or chain.

0.4 mm

Added to the cord for the hole. Small holes print tight, so add more if threading is hard.

20 mm
3.0 mm

The slot adds 0.6 mm to the width and 0.4 mm to the thickness so the letters slide on.

Bracelet

170 mm

Measure around the wrist and add a little room. Spacers are split between both ends.

Colours

Beads
Preview

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    The method

    How to make letter beads

    Type a word and the generator makes one bead per letter, each with a hole running sideways through it. Beads print face up, so the letters come out crisp, and the hole is shaped to print over itself without supports.

    1. Type the letters and pick a bead shape and size.
    2. Measure your cord or strap and set the hole to match.
    3. Choose the lettering: raised for a colour change on one nozzle, flush for a multi-material printer, engraved for one colour.
    4. Download, print and thread.

    Ideas

    What to make

    MakeSettings
    Friendship braceletSquare or round beads, 10–12 mm, elastic cord, rainbow beads, filled to the wrist size
    Letter charmsLetter charm shape, 18–25 mm, a 2–3 mm cord or chain
    Collar or strap lettersSquare beads, Strap or collar hole, the strap’s width and thickness
    Bag and lanyard namesHexagon or heart beads on a 2–3 mm cord
    Spelling and sorting gamesBig round beads, 20 mm or more, on a thick lace (for children over 3)

    Holes

    Holes that print cleanly

    A round hole lying on its side would need support at the top. Here the top of the cord hole rises to a point at 45°, a common rule of thumb for the steepest overhang that prints cleanly, so it prints without any. A strap slot is flat on top, which prints as a short bridge. Small holes come out a little tight: if threading is hard, add 0.2 mm more room, or twist a drill bit through by hand.

    Printing

    Printing tips

    • Layers: 0.12–0.16 mm for beads under 12 mm, so the letters stay sharp.
    • Two colours on one nozzle: raised letters, with a colour change at the height the page gives.
    • Rainbow beads: every bead is its own object in the 3MF; on one nozzle, print one colour’s beads at a time.
    • Elastic: pre-stretch it before threading, and tie a surgeon’s knot.
    • Small parts: beads aren’t for children under 3.

    Questions, answered

    Is it free to use?

    Yes. No account, no watermark, no limits.

    How many beads do I need for a bracelet?

    Measure around the wrist, add a little room, and switch on Fill with spacers to a length. The page adds plain spacer beads at both ends to reach it.

    Can I use symbols or emoji?

    Any character the typeface has works. Hearts and stars come from the device’s own fonts when the typeface lacks them, so check the preview.

    Can I sell what I make?

    The typefaces are open-licensed and allow making physical products. Jewellery for young children has its own safety rules in many countries, so check them before selling.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-09. Community posts are one maker's experience, not a specification.

    1. Color change Prusa Research
    2. View slicing information (pauses and filament changes) Bambu Lab
    3. SIL Open Font License SIL International