The method
Print a model bigger than your printer
A printer can only make parts as big as its build volume. To go bigger, the model is cut into parts that each fit, printed one at a time and joined. This tool does the cutting in your browser.
- Open the model and type the finished size you want. One number is enough; the others follow.
- Choose your printer, or type its bed size. The tool works out the fewest parts that fit and shows them in a different colour each.
- Pick a joint. Matching holes, pegs or pockets are added to both sides of every cut.
- Download the parts, each already turned onto its print side, with an assembly guide.
Cuts
How the cuts are chosen
Every cut is straight and flat. Flat cut faces sit well on the bed and glue cleanly. You choose the shape of the cuts and how much of the work the tool does.
- Grid. Cuts across the width, depth and height, giving blocks. This suits most models.
- Wedges. Cuts through the upright centre line, like slicing a cake, with flat layers added when the model is too tall. This suits round things such as domes, bowls, wheels and planets, because every seam runs from the middle to the edge.
- Fewest parts. The tool divides each side of the model by the space on your bed and rounds up. When “Turn parts onto their best side” is on, it also tries laying the parts on another side and keeps whichever way needs fewer.
- Place each cut. Type the position of every cut yourself, for example to keep a seam off a face or a logo. The fields start with the cuts the tool chose.
- Smart seams. Starting from equal parts, a cut moves to a nearby place where the model is thinner than on both sides, such as a waist or a stem, if every part still fits.
- Staggered seams. Every other layer and row has its cuts moved sideways, like bricks in a wall. A part then bridges the seam below it, and no seam runs straight through the model. The tool only uses spare room on the bed for this, so the number of parts stays the same.
- Turned and tilted cuts. The whole cutting grid can be turned about the upright axis and tilted, up to 45° each way, for seams that follow a leaning or diagonal model.
- Angled cuts. Up to 12 cuts that each have their own position, turn and lean. Every cut goes right through the model, one after another, and each part is saved lying on its largest cut face. Use this to follow a shoulder line, to keep a seam off a face, or to split a long model on a slant so the parts lock against sliding. The tool doesn’t choose these cuts for you.
- Safety margin. The margin is taken off both edges of the bed and off the top, so brims and skirts still fit.
- Empty cells are skipped. A cell of the grid with no model in it makes no part.
Parts that don’t fit the bed are flagged in red.
Joints
Which joint to use
| Joint | What gets printed | Best for |
|---|---|---|
| Dowel pins | A round hole in both faces, plus separate pins that print lying down | Most prints. Both cut faces stay flat, so either can sit on the bed |
| Pegs and holes | A peg on one face and a hole in the other | Fewer loose pieces. The face with pegs can’t go on the bed |
| Square keys | A square hole in both faces, plus separate square keys | Small faces with room for only one joint: a square key can’t turn, so one is enough to line the parts up |
| Snap clips | An undercut slot in both faces, plus separate barbed clips | Joints that hold themselves while the glue sets, or without glue on light models |
| Filament pins | Small holes in both faces for short lengths of 1.75 mm filament | Thin walls and small faces where a printed pin won’t fit |
| Magnet pockets | A pocket in both faces, sized to your disc magnets | Models that come apart again for moving or storage |
| Flat faces | Nothing | Glue-only joints, or when you will add your own fixings |
- Sized to the face. On “Auto”, each face gets the biggest pin or key from 3 to 10 mm that leaves a solid wall around it. Large faces get up to four, or two magnets.
- Checked at depth. Before a hole is placed, the model is checked at the hole’s full depth on both sides, so a hole never breaks out through a sloping or thin wall, through the far side of a thin part, or into a hole coming from another face. A face too small for any joint is left flat and listed in the fit check.
- Clearance. The fit clearance is added to every hole. 0.2 mm is only this tool’s starting value. Printers and filaments differ, so download the fit test piece in step 5 and print it before printing the rest.
- Pins, keys and clips print lying flat, so their layers run along their length. The download includes spares.
- Snap clips are new. A clip is a flat bar with a barbed, slotted head at each end. Each head squeezes through the narrow mouth of its pocket and springs out behind it. How well it holds depends on your filament and printer, so try the fit test piece first, and glue the joint as well if it must not come apart.
Printing
Getting parts that fit together
- Use the print side in the file. Each part is saved already turned. The tool picks the side with the least overhanging surface and the most flat area on the bed, which is often a cut face.
- Keep settings the same for every part: the same printer, nozzle, filament and layer height, so the faces meet evenly.
- Find each part’s number on a cut face. The bar under the number shows which way up it reads. The assembly guide shows where every number goes, layer by layer.
- Fit everything dry first, then glue with an adhesive that suits your filament.
Scaling
What scaling up changes
Scaling multiplies every dimension by the same amount, so the model keeps its proportions. Two things are worth knowing:
- Filament grows with the cube of the scale. A model at twice the size has eight times the volume. The estimate in step 6 shows the weight and cost before you print.
- Facets grow too. A curved surface in an STL is made of flat triangles. They become easier to see as the model gets bigger. If you can, export the original at a finer resolution.
| Scale | Size | Volume |
|---|---|---|
| 200% | 2× | 8× |
| 300% | 3× | 27× |
| 500% | 5× | 125× |
| 1,000% | 10× | 1,000× |
Hollowing and repair
Hollow models and broken meshes
- Hollowing works out how deep every point inside the model lies and builds an inner surface one wall thickness in. The inside is measured on a grid, so the tool errs on the thick side: walls come out at the thickness you asked for or a little more. Thin parts of the model that have no room for a cavity stay solid. Look at narrow grooves and deep sharp corners in your slicer, where a grid can miss detail.
- The cavity is closed until the model is cut. Once cut, most parts are open shells. For resin printing, check in your slicer that no part still holds a sealed pocket, and add drain holes there.
- Joints sit in the wall, so a hollow model needs a wall thick enough to hold them: about 6 mm for filament pins and 8 mm or more for printed pins. Thinner walls are left flat for glue.
- Repair runs when you open a file that isn’t watertight. It joins points that are almost on top of each other, removes collapsed and doubled triangles, turns faces that point the wrong way and closes holes with flat patches. The fit check says what was fixed and whether anything is still open.
Limits
What this tool doesn’t do yet
- Cuts are flat and go right through. An angled cut can have its own position and angle, but it can’t stop part-way through the model, and you can’t draw a curved cut.
- No dovetails or lap joints. Joints are holes, pegs and pockets in the cut faces.
- No drain holes. Hollow parts for resin printing may need drain holes added in your slicer.
- Repair is for common faults. A model made of many overlapping shells, or one with large missing areas, needs a mesh tool.
- Up to 300 parts and 2 million triangles per job.
Questions, answered
Is my file uploaded?
No. The model is scaled and cut by your browser, on your device. Nothing is sent to 3Dprintsy or anyone else.
Is there a limit on the number of parts?
Up to 300 parts per job, with every joint type. There’s no account and no paid tier.
How do I know which part goes where?
Each part has its number engraved on a cut face, and the zip download includes an assembly guide as a web page and as a PDF: a map of every layer with the part numbers, a table of sizes, print sides, weights and times, and the list of plates. You can also download the PDF on its own in step 7.
What is a plate?
A group of parts that fit on the bed together, so they can print in one go. The tool packs the parts into as few plates as it can. Choose “STL per plate” to get one file for each, already arranged, or “One 3MF” to get every plate side by side in one file.
How is the print time worked out?
From the volume of filament in each part, divided by your layer height, line width and print speed, with 30% added for travel moves and slowing at corners. It is a rough guide for planning; your slicer gives the real time. With more than one printer, the plates are shared out so the printers finish as close together as possible.
Should I hollow the model?
For resin, hollowing a large model saves a lot of resin. For filament, a low infill gives much the same saving and keeps solid faces for the joints, so hollowing is only worth it when you want an empty inside, for example to add weight or lights.
Will the parts need supports?
Often less than the whole model would. Each part is turned onto the side with the least overhang, and the cut faces are flat. Shapes that overhang in every direction will still need some support.
Can I use it for resin printers?
Yes. Type your resin printer’s build volume in step 3. The pin holes and labels are the same; choose a clearance that suits your resin and exposure.
Why did a seam get no pins?
The contact area there is too small or too thin to hold a pin with a solid wall around it. Try a smaller pin, filament pins, or move the cut with “Place each cut”.
Can each cut have its own angle?
Yes. Choose “Angled cuts” in step 4 and set up to 12 cuts, each with its own position, turn and lean of up to 45°. Joints are still checked at depth, so a hole keeps a solid wall to every other cut face of its part.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-11. Community posts are one maker's experience, not a specification.
- 3MF Core Specification 3MF Consortium
- STL (STereoLithography) File Format Family Library of Congress
- Wavefront OBJ File Format Library of Congress
- Technical data at a glance (densities) Polymaker