The method
How to make a lattice part
Pick a cell and a shape, and the generator fills the shape with the repeating cell, trims it cleanly at the surface and seals it into a solid that slices like any other model. The density and weight update as you go.
- Choose a cell: a minimal surface such as the gyroid, or a strut lattice such as the octet truss.
- Choose the shape and its size, and add solid plates or walls if the part needs a face.
- Set the cell size and thickness, or grade it so it gets denser towards the top.
- Download and print. Most cells need no supports; the tips below say which ones bridge.
Cells
The cells
| Cell | Kind | How it prints | Good for |
|---|---|---|---|
| Gyroid | Minimal surface | No supports: it leans everywhere | Light, stiff parts; even in every direction |
| Schwarz P | Minimal surface | No supports; flatter spots at chamber tops | Round chambers, fluid and air flow samples |
| Schwarz D (diamond) | Minimal surface | No supports | Stiff, dense-looking blocks |
| Neovius | Minimal surface | No supports; flatter spots on big cells | A busier, more enclosed surface |
| Lidinoid | Minimal surface | No supports; fine detail needs small layers | A twisted, organic look |
| BCC | Struts | Struts lean 35°: fine on small cells | Simple, light infill |
| FCC | Struts | 45° struts plus flat ones that bridge | Stiffer than BCC |
| Octet truss | Struts | 45° struts plus flat ones that bridge | High stiffness for its weight |
| Simple cubic | Struts | Upright struts and flat bridges | Grids, crates, test coupons |
| Diamond | Struts | Struts lean 35° | Springy, bending-dominated parts |
| Kelvin | Struts | 45° struts plus flat ones that bridge | Foam-like cushioning |
Settings
Sizes and settings
| Setting | Range | What it does |
|---|---|---|
| Cell size | 4–30 mm | The repeat length. Smaller cells are stiffer, with shorter bridges. |
| Wall thickness | 0.6–4 mm | Sheet surfaces. At least two nozzle widths prints reliably. |
| Strut diameter | 0.8–6 mm | Strut lattices. Nodes are filleted so struts don’t snap at the joints. |
| Network density | 10–70% | Network surfaces: the share of each cell that is solid. |
| Grading | Bottom to top | Thickness or density changes smoothly up the part. |
| Plates and walls | 0.8–5 mm | Solid skins: a bottom plate for bed grip, a top for a flat face, walls round the sides. |
| Detail | Draft, Standard, Fine | How finely the download is meshed. |
Printing
Printing tips
- Overhangs: most printers handle slopes of 45° or more from the bed without supports. Minimal surfaces lean all the way round, so they rarely need any.
- Bridges: flat struts in FCC, octet, cubic and Kelvin cells print as bridges between nodes. Keep cells small and the cooling fan on.
- Slicing: use 100% infill or enough perimeters, so the slicer fills the thin walls solid. Big lattices slice slowly.
- Bed grip: a lattice touches the bed only where cells are cut. Add a bottom plate or a brim.
- Test first: print the compare plate to see how each cell turns out on your printer before a big part.
Questions, answered
Is it free to use?
Yes. No account, no watermark, no limits. Everything is built in your browser.
Will it fit my printer?
Choose your printer below the preview. If the part is too big, lower the width, depth or height; the cells stay the same size.
Can I sell parts I print?
The designs you make are yours. The cells are mathematical shapes that anyone may use, and the label typeface is open-licensed, which allows making physical products. We make no claims about strength: test any part that carries a load.
Why is the file so big?
Lattices have a lot of surface. Lower Detail, use bigger cells or a smaller part to shrink the file. The advice list shows the triangle count before you download.
How is the density worked out?
From the finished solid: its volume divided by the volume of the shape it fills, including any plates and walls. The weight assumes PLA at 1.24 g/cm³.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-10. Community posts are one maker's experience, not a specification.
- Gyroid Wikipedia
- Triply periodic minimal surface Wikipedia
- Schwarz minimal surface Wikipedia
- Neovius surface Wikipedia
- Lidinoid Wikipedia
- Bitruncated cubic honeycomb (Kelvin structure) Wikipedia
- Effective properties of the octet-truss lattice material Journal of the Mechanics and Physics of Solids (Deshpande, Fleck and Ashby, 2001)
- Marching cubes: a high resolution 3D surface construction algorithm ACM SIGGRAPH (Lorensen and Cline, 1987)
- Modeling with 3D printing in mind Prusa Research