Photo puzzle maker
From a photo to a printed puzzle
This page opens the jigsaw studio with a 24-piece photo puzzle. Your photo is reduced to a few filament colours and printed as a thin colour layer on each piece.
Fewer, bigger pieces suit young children; numbered pieces help with large puzzles. The gap between pieces is a setting, so you can tune it to your printer.
Your photo never leaves this device.
Same studio, other starting points: Jigsaw puzzle generator.
The method
How to make a photo jigsaw puzzle
Pick a size and a piece count, and the generator draws the cuts: every cut is one smooth curve shared by the two pieces beside it, and each piece takes it moved half the cut gap towards itself. Your photo is grouped into a few filament colours and becomes a thin layer on top of every piece, split exactly along the cuts.
- Add a photo or choose a sample. Bold pictures with big areas of colour read best.
- Set the size and pieces: a target count, or columns × rows.
- Shape the pieces: tab size, jitter and the cut gap. Shuffle the seed for new shapes.
- Add a tray and lid if you want, then download and print.
Options
Cuts and pictures
| Option | What you get | Printer |
|---|---|---|
| Classic tabs | Interlocking pieces that hold together | Any |
| Wavy | Smooth wavy edges, no tabs; easier for young children | Any |
| Straight grid | Square tiles, a sliding-free picture puzzle | Any |
| Photo in colour | A 2–6 colour layer on top of every piece | Multi-material (AMS, MMU, tool changer) |
| Line art | Raised lines (a colour change gives two colours) or engraved lines | Any |
| Plain with numbers | Numbers engraved underneath, for sorting | Any |
Sizes
Pieces and sizes
| Puzzle | Pieces | Piece size |
|---|---|---|
| 150 × 100 mm | 6 (3 × 2) | 50 mm, a toddler puzzle |
| 200 × 150 mm | 24 (6 × 4) | 33 mm |
| 250 × 250 mm | 100 (10 × 10) | 25 mm |
| 300 × 200 mm | 150 (15 × 10) | 20 mm |
Pieces under about 20 mm get fiddly to print and to hold. The tray adds 6 mm of wall all round, plus the clearance.
Printing
Printing tips
- Cut gap: start at 0.2 mm. If pieces are tight, raise it by 0.05 mm; the tolerance test finds your printer’s number.
- Printing assembled: pieces are kept apart only by the gap, so the first layer matters. Turn on elephant’s foot compensation (about 0.2 mm on a 0.4 mm nozzle) and keep the bed clean and level.
- Colour layer: slice at the layer height you chose, so the picture is whole layers. Each colour is its own part; give each its filament.
- One nozzle: use line art with raised lines and add a colour change where the lines start.
- Kids: print knobbed pieces with 100% infill or five walls, in PLA or PETG.
Safety
Small parts
Puzzle pieces are small parts. US rules ban small parts in toys for children under 3 (16 CFR 1501): a part is small if it fits inside a test cylinder 31.8 mm across, 25.4–57.1 mm deep. Kids mode measures each piece against that cylinder (longer than 65.4 mm, or wider than 31.8 mm every way, with a margin) and says if any could fit. That is a design check, not a safety test.
Questions, answered
How many colours can the picture have?
From two to six filament colours. Pictures with bold areas of colour work best.
Do I need a multi-colour printer?
For the photo layer, yes, or use the line-art option, which needs only a colour change.
Which puzzle is best for toddlers?
The 6-piece preset with knobs and a tray. Small pieces are not for children under 3.
Is it free to use?
Yes. No account, no watermark, no limits, and your photo never leaves this device.
Will it fit my printer?
Choose your printer below the preview, or pick Fill my printer to make the biggest puzzle that fits. Printed assembled, the puzzle is one block; spread on plates, pieces fill as many plates as needed, one file per plate.
Can I sell puzzles I print?
The puzzles you make are yours. The photo is the part to check: only use pictures you took, bought a licence for, or have permission to use. Toys for children sold in the US need third-party testing and a Children’s Product Certificate, so check the rules before you sell.
Do I need a multi-colour printer?
For the photo in colour, yes: the colours share the same layers. On one nozzle, use line art with raised lines and a colour change, or plain pieces.
The pieces are too tight. What now?
Raise the Cut gap by 0.05 mm and reprint, and check elephant’s foot compensation in your slicer. Printing the pieces spread on plates also avoids fused bottom edges.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.
- Elephant foot compensation Prusa Research
- Multicolor printing with a Prusa: beginner’s guide Prusa Research
- Color change Prusa Research
- 16 CFR Part 1501: method for identifying toys and other articles intended for use by children under 3 years of age which present choking, aspiration, or ingestion hazards because of small parts eCFR
- Small Parts Ban and Choking Hazard Labeling U.S. Consumer Product Safety Commission
- Children’s Product Certificate U.S. Consumer Product Safety Commission