Free generator · Runs in your browser

House number signs Easy to read from the street.

Make an address plaque with big, clear numbers and your street name. Choose the shape, border and colours, add screw holes or a tape recess, and download an STL or 3MF.

  • Private by designNothing leaves this device
  • Six plate shapesSized to your text
  • No supportsPrints face up
  • Two-colour readySwap layer shown

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Plate

Shape
Size
8 mm

The plate grows to hold the text, icon and holes with this much space around them.

200 mm
100 mm

Text and icon shrink to fit if they are too big. Pick your printer below the preview to check it fits.

8 mm
10 mm
5.0 mm

5 mm or more for outdoor signs and stakes; keyhole slots need about 6 mm.

Border

Text

60 mm

Height of a capital letter or digit.

12 mm
10 mm
Typeface
Line alignment
0.0 mm

Grows thin strokes, for script typefaces and small lines.

Letters
1.6 mm
1.0 mm

The plate below the letters takes the letter colour: swap filament where the face starts.

Icon

Icon

Use this when your logo is light on a dark background.

30 mm
Icon goes

Points the arrow the other way.

Mounting

Holes

7.5 mm suits a 4 mm countersunk wood screw. Measure yours if it differs.

Measure your double-sided mounting tape.

0.6 mm

Keep it shallower than the tape is thick, so the tape still presses on the wall.

100 mm
Stakes
15 °
0.30 mm

Extra width in the stand’s slot. Raise it if the plate will not slide in.

Preview

Colours

Match your slicer profile: the swap layer below the preview depends on it. The first layer is assumed to be the same height.

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    House number sign generator

    House numbers people can read

    This page opens the sign studio set up for an address: large numbers on a rounded plate with the street name below. Bold fonts and strong contrast read best from a distance.

    For outdoor signs, print in ASA or PETG, which handle sun and weather better than PLA.

    Check any local rules on number size and placement where you live.

    Same studio, other starting points: Sign generator · Desk name plate generator.

    The method

    How to make a 3D printed sign

    Type up to three lines, pick a plate shape and a way to hang it, and the generator sizes the plate around the text (or fits the text into the size you measured), adds the border, icon and holes, and gives you a file ready to slice.

    1. Pick a shape and whether the plate fits the text or a size you set.
    2. Type the text. Each line has its own letter height, so a big house number can sit over a small street name.
    3. Add an icon or your logo, and a border.
    4. Choose the mounting: screws, keyholes, tape, cord, a garden stake or a desk stand.
    5. Download and print face up. The text and border are their own parts in the 3MF, and the swap layer for one nozzle is shown below the preview.

    Mounting

    Ways to put it up

    MountBest forHow it works
    Countersunk screwsHouse numbers, outdoor plaquesHoles with a 90° countersink, so the screw head sits flush with the face. Sized from your screw: 4 mm thread and 7.5 mm head by default.
    Keyhole slotsName plates, indoor signsHidden on the back. Push the sign over two screw heads and slide it down. Needs a plate of about 6 mm.
    Tape recessDoor and office signsShallow pockets on the back for strips of double-sided mounting tape, so the sign sits flat against the door.
    Cord holesDoor hangers, shop signsTwo holes at the top corners for a cord, ribbon or chain.
    Garden stakePlant markers, yard signsA pointed stake below the sign, printed flat as one piece.
    Desk standDesk name signs, receptionA separate stand with a slot that leans the sign back. Slide the plate in; no glue needed.

    Sizes

    Letter heights that read

    Bigger letters read from further away. Print one line as a test and look at it from where people will stand. For a house number seen from the street, larger is better; some places set a minimum size for house numbers, so check your local rules.

    SignMain lineSecond lineSuggested plate
    House number60–100 mm12–20 mm150–250 mm wide, 5–6 mm thick
    Family name plate20–35 mm8–12 mm160–220 mm wide
    Desk name sign14–20 mm7–10 mm150–200 mm wide
    Door sign15–25 mm7–10 mm100–200 mm wide
    Garden stake10–18 mm—70–120 mm wide, 5 mm thick

    Printing

    Printing tips

    • Two colours on one nozzle: raised text and borders start on the plate’s top face, so swap filament at the layer shown below the preview. Engraved text works the other way: the plate under the letters is one colour and the face over it another.
    • Three colours: on a multi-material printer, give the plate, text and border their own filament in the 3MF.
    • Outdoors: print in ASA or PETG, not PLA. ASA resists UV light and heat well; PETG copes with water and most outdoor use but fades in strong sun. Use 4 or more walls and 5 mm or more of thickness, and stainless screws.
    • Stakes: push a stake into damp soil, or make a pilot hole first, so it does not snap. PETG bends rather than breaks.
    • No supports: everything prints face up. Keyhole slots and tape recesses on the back bridge a short gap, which most printers handle.
    • Script typefaces: raise Thicken letters to 0.3 mm or more so thin strokes print.

    Questions, answered

    How big should house numbers be?

    Bigger is easier to read from the street. Some towns set a minimum height for house numbers, so check your local rules.

    Which filament for outdoors?

    ASA or PETG. PLA can soften and fade in direct sun.

    Can the numbers be a different colour?

    Yes. Raised text is its own part, so print it in a second colour or add a colour change where the text starts.

    Is it free to use?

    Yes. No account, no watermark, no limits.

    Will it fit my printer?

    Choose your printer below the preview to check. If the sign is too big, lower the letter height or set a smaller size; long signs can also be printed in parts and joined.

    Can I sell signs I print?

    The designs you make are yours. The typefaces are open-licensed, which allows making physical products. If you add a logo, make sure you have the right to use it.

    Will it last outside?

    ASA and PETG last far longer outdoors than PLA, which softens in hot sun and turns brittle. A coat of UV-resistant clear lacquer helps any filament.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-10. Community posts are one maker's experience, not a specification.

    1. DIN 7997: cross-recessed countersunk head wood screws, dimensions fasten.it
    2. ASA Prusa Research
    3. PETG Prusa Research
    4. Color change Prusa Research
    5. SIL Open Font License SIL International