Desk name plate generator
A name plate for any desk
This page opens the sign studio set up for a desk: a name and a job title on a plate, with a slotted stand that leans it back. Change the font, border and colours to match an office or a classroom.
Raised letters in a second colour stand out best. Print it flat on its back with no supports.
Making several? Change the name and download again; your settings stay as they are.
Same studio, other starting points: Sign generator · House number sign generator.
The method
How to make a 3D printed sign
Type up to three lines, pick a plate shape and a way to hang it, and the generator sizes the plate around the text (or fits the text into the size you measured), adds the border, icon and holes, and gives you a file ready to slice.
- Pick a shape and whether the plate fits the text or a size you set.
- Type the text. Each line has its own letter height, so a big house number can sit over a small street name.
- Add an icon or your logo, and a border.
- Choose the mounting: screws, keyholes, tape, cord, a garden stake or a desk stand.
- Download and print face up. The text and border are their own parts in the 3MF, and the swap layer for one nozzle is shown below the preview.
Mounting
Ways to put it up
| Mount | Best for | How it works |
|---|---|---|
| Countersunk screws | House numbers, outdoor plaques | Holes with a 90° countersink, so the screw head sits flush with the face. Sized from your screw: 4 mm thread and 7.5 mm head by default. |
| Keyhole slots | Name plates, indoor signs | Hidden on the back. Push the sign over two screw heads and slide it down. Needs a plate of about 6 mm. |
| Tape recess | Door and office signs | Shallow pockets on the back for strips of double-sided mounting tape, so the sign sits flat against the door. |
| Cord holes | Door hangers, shop signs | Two holes at the top corners for a cord, ribbon or chain. |
| Garden stake | Plant markers, yard signs | A pointed stake below the sign, printed flat as one piece. |
| Desk stand | Desk name signs, reception | A separate stand with a slot that leans the sign back. Slide the plate in; no glue needed. |
Sizes
Letter heights that read
Bigger letters read from further away. Print one line as a test and look at it from where people will stand. For a house number seen from the street, larger is better; some places set a minimum size for house numbers, so check your local rules.
| Sign | Main line | Second line | Suggested plate |
|---|---|---|---|
| House number | 60–100 mm | 12–20 mm | 150–250 mm wide, 5–6 mm thick |
| Family name plate | 20–35 mm | 8–12 mm | 160–220 mm wide |
| Desk name sign | 14–20 mm | 7–10 mm | 150–200 mm wide |
| Door sign | 15–25 mm | 7–10 mm | 100–200 mm wide |
| Garden stake | 10–18 mm | — | 70–120 mm wide, 5 mm thick |
Printing
Printing tips
- Two colours on one nozzle: raised text and borders start on the plate’s top face, so swap filament at the layer shown below the preview. Engraved text works the other way: the plate under the letters is one colour and the face over it another.
- Three colours: on a multi-material printer, give the plate, text and border their own filament in the 3MF.
- Outdoors: print in ASA or PETG, not PLA. ASA resists UV light and heat well; PETG copes with water and most outdoor use but fades in strong sun. Use 4 or more walls and 5 mm or more of thickness, and stainless screws.
- Stakes: push a stake into damp soil, or make a pilot hole first, so it does not snap. PETG bends rather than breaks.
- No supports: everything prints face up. Keyhole slots and tape recesses on the back bridge a short gap, which most printers handle.
- Script typefaces: raise Thicken letters to 0.3 mm or more so thin strokes print.
Questions, answered
What size is a desk name plate?
Fit mode sizes the plate to the text for you. Choose a fixed width if it must fill a holder or a space.
Can I make one for each person in a team?
Yes. Change the name and download again for each person.
Does the stand print separately?
Yes. The stand is its own piece with a slot that leans the plate back; both print flat with no supports.
Is it free to use?
Yes. No account, no watermark, no limits.
Will it fit my printer?
Choose your printer below the preview to check. If the sign is too big, lower the letter height or set a smaller size; long signs can also be printed in parts and joined.
Can I sell signs I print?
The designs you make are yours. The typefaces are open-licensed, which allows making physical products. If you add a logo, make sure you have the right to use it.
Will it last outside?
ASA and PETG last far longer outdoors than PLA, which softens in hot sun and turns brittle. A coat of UV-resistant clear lacquer helps any filament.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-10. Community posts are one maker's experience, not a specification.
- DIN 7997: cross-recessed countersunk head wood screws, dimensions fasten.it
- ASA Prusa Research
- PETG Prusa Research
- Color change Prusa Research
- SIL Open Font License SIL International