Free generator · Runs in your browser

Clay cutters Earrings and charms.

Turn a shape, an SVG or a picture into a polymer clay cutter with a thin cutting edge. Set the size for earrings or charms, add a grip, and download an STL or 3MF.

  • Private by designDrawings stay on this device
  • Cutter and stampStamp fits inside the cutter
  • Sharp, sturdy bladeTapered like the pros
  • Ready to sliceSTL and two-part 3MF

Drag to rotate · Scroll or pinch to zoom · Arrow keys when focused

Size
—
Filament
—
Parts
—
Fits
—

Start from

Shape

Start from
Typeface

Size

80.0 mm

Measured along the longer side.

14.0 mm

14 mm suits rolled cookies; 15–20 mm for thick gingerbread.

0.8 mm

Closes small gaps and softens tight inside corners the dough would tear on.

Cutter

0.80 mm
1.6 mm
4.0 mm

The wide rim you press on. It also holds the cutter flat on the bed.

2.0 mm

Stamp

Raises the drawing’s inner lines (eyes, buttons, veins) so they emboss the dough.

1.0 mm
2.0 mm

Window

A small cutter in the same shape, for the window in sandwich cookies.

0.40 ×

Colours

Download

Building the preview…

Print it well

    Everything is built on this device. Nothing you type or upload is sent anywhere.

    Advertisement

    Clay cutter generator

    Cutters for polymer clay

    This page opens the cookie cutter studio set up for clay: a 40 mm cutter, a thin blade and no stamp. Change the size for studs, drops or charms, and print one small test cutter first.

    A cutter for clay works like a cookie cutter: a thin wall that cuts, a wider flange to press on, and an optional grip. Use the stamp option for a cutter that also presses a pattern.

    Your shape never leaves this device.

    Same studio, other starting points: Cookie cutter generator.

    The method

    Make a cookie cutter in four steps

    The generator traces the outer outline of your drawing, builds a tapered cutter around it and, if you like, a stamp that presses the inner lines into the dough. Everything happens on your device.

    1. Choose a drawing. Clean, dark line art on a light background traces best. SVG files work too, or type a letter or number.
    2. Size it. Set the cookie's longer side; 60–100 mm is typical.
    3. Tune the cutter. The defaults follow common practice: a 0.8 mm blade on a sturdier wall and flange.
    4. Print blade up. The flange sits on the bed, so no supports are needed.

    Design

    Anatomy of a good cutter

    PartDefaultWhy
    Blade0.8 mm, top 3–4 mmTwo nozzle widths: thin enough to cut cleanly, thick enough to print solid.
    Wall1.6 mmKeeps the outline from flexing as you press.
    Flange4 mm wide, 2 mm highSpreads the pressure on your hand and holds the print flat while it prints.
    Height14 mmDeep enough for rolled dough; go to 15–20 mm for thick gingerbread.

    Food safety

    Using printed cutters safely

    Printed plastic is not like a metal cutter. Layer lines trap dough, and bacteria can grow in them, so Prusa recommends treating printed cutters as items you replace after some use.

    • Keep contact short: cookie dough touches the cutter for seconds, which is the low-risk end of food contact.
    • Wash by hand in warm water. PLA softens above about 60 °C, so no dishwasher.
    • Nozzle matters: brass nozzles can contain lead; a stainless steel nozzle is preferred for food items.
    • "Food-safe" filament refers to the raw material. Regulators such as the FDA judge each substance, not the finished print, so the print itself is never certified.

    Artwork

    Drawings that make great cutters

    • Bold outlines. Thin, broken lines are bridged by the smoothing control, but closed shapes trace best.
    • Avoid tiny features. Narrow necks under about 5 mm tear the dough and snap off when baked.
    • Inner details become the stamp. Eyes, buttons and patterns inside the outline are raised on the stamp, mirrored so they read correctly.
    • Solid silhouettes make plain stamps; use a line drawing to get embossed detail.

    Questions, answered

    What size should clay earring cutters be?

    Whatever suits the earring: start around 30 to 40 mm and print one test cutter first. Very small shapes lose detail.

    Why does my clay stick in the cutter?

    Dust the cutter with cornflour or chill the clay. A thin blade and a smooth inside also help the clay release.

    Can the same cutter be used for food afterwards?

    Keep clay tools for clay only. Polymer clay is not food safe.

    Can I use any image?

    Yes, as long as the shape is darker than the background. Use Invert for a light drawing on a dark background. Only use images you have the right to use.

    Why is my stamp plain?

    The stamp raises the drawing’s inner lines. A solid black silhouette has none, so the stamp is a flat plate. Use a line drawing with details inside the outline.

    Which filament should I use?

    PLA or PETG both work. Keep cutters away from heat: PLA softens around 60 °C.

    Does the stamp fit inside the cutter?

    Yes. It is inset by the fit value (1 mm by default) on every side, so you can press it in after cutting.

    Are printed cookie cutters food safe?

    Short contact with dough is common practice, but layer lines can trap food, so wash them by hand and replace them after a while. See the food-safety notes above.

    Sources

    Print advice is a starting point drawn from these references, checked on 2026-11-07. Community posts are one maker's experience, not a specification.

    1. Food-safe FDM printing Prusa Research
    2. PLA material guide (heat resistance) Prusa Research
    3. How to make food-grade 3D printed models Prusa Research blog
    4. Determining the regulatory status of components of a food contact material US Food and Drug Administration
    5. Cookie Cutter Maker documentation (blade and flange dimensions) Superhive