Medal generator
Medals for any event
This page opens the trophy studio with a 1st, 2nd and 3rd medal set. Change the event name, the year and the emblem, and the slot follows the ribbon width you measure.
For team awards, paste a list of names to make one medal (or one set) per person, packed onto your printer’s plates.
A spinning centre is an option for a fidget-style medal.
Same studio, other starting points: Trophy and medal generator.
The method
How to make a trophy or medal
Pick an award, type the event, the name and the year, and the generator builds every part ready to print: the cup and its base, the plaque, a topper on a peg, or a medal with a slot for your ribbon.
- Choose the award: a trophy cup, a column award, a medal or a wall plaque.
- Size it. For a medal, measure your ribbon’s width.
- Add the text and a topper or emblem. For a team, paste a list of names.
- Download and print. Each part is its own object, so the cup, base, plaque and text can each take their own filament.
Options
What each award is made of
| Award | Parts | Prints | Notes |
|---|---|---|---|
| Trophy cup | Base, cup on a stem, plaque, optional lid and topper | Cup upright or in two halves; plaque flat | Handles print with the cup or glue on |
| Column award | Base, star column or upright plaque, topper | Column upright; plaque flat | The column fits a peg on the base; the plaque’s tab fits a slot |
| Medal | Medal, raised text, optional spinning centre or bearing caps | Flat, face up | Ribbon slot = ribbon width + clearance |
| Wall plaque | Shield, raised text and rim | Flat, face up | Keyhole slot on the back for one screw |
Printing
Printing tips
- Overhangs: slopes of 45° or less from vertical print without supports on most printers. The classic, tall and flute cups stay within that; the bowl does not, so print it in halves or add supports under it.
- Handles: printed-on handles keep every slope at 50° or steeper. For wide loops, choose glue-on handles, which print flat.
- Two colours on one nozzle: add a colour change where the raised text starts on a plaque or medal, and at the top of the base on an upright cup.
- Gold, silver and bronze: in a set, each medal colour is its own part in the 3MF.
- Spinning centre: the printed-in-place centre needs the right spin gap for your printer. Free it with a twist after printing.
Questions, answered
What ribbon width should I use?
Measure your ribbon; the slot is sized to it with a small clearance.
How do I get gold, silver and bronze?
Each medal in a set is its own part, so print each in its colour, or paint them.
Can I add a club logo?
Yes, upload a picture of a logo you are allowed to use.
Is it free to use?
Yes. No account, no watermark, no limits.
Will it fit my printer?
Choose your printer below the preview. Parts that don’t fit one plate spread over as many plates as needed, and the download comes with a file per plate.
Can I sell awards I print?
The designs you make are yours. The typefaces are open-licensed, which allows making physical products. Do not add logos or names you don’t have the right to use. Medals with spinning centres or bearings have small parts: not for children under 3.
What ribbon width should I use?
Measure the ribbon you have. Ribbons are sold in inch widths, such as 7/8 inch (about 22 mm), 1 inch (25.4 mm) and 1.5 inch (38 mm), and the slot adds your clearance on top.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.
- The 45-degree rule in 3D printing Snapmaker
- Support material: overhang threshold Prusa Research
- Color change Prusa Research
- 608 high precision ball bearing data sheet GMN Bearing USA
- Ball bearing dimension table (608, 688, 626) igus
- R188 series ball bearings NSK
- Small parts for toys and children’s products US Consumer Product Safety Commission
- SIL Open Font License SIL International