Coffee scoop generator
A coffee scoop that measures what you choose
This page opens the scoop studio with a two-tablespoon coffee scoop and a bag clip. Change the amount and the cup is resized until it holds exactly that volume.
Ground coffee varies in density, so for grams choose “my own powder” and weigh a level scoop once to set it.
Check a new scoop by weighing water: about 1 g per ml.
Same studio, other starting points: Measuring scoop generator.
The method
How to make a measuring scoop
Say how much the scoop should hold, in millilitres, spoons, cups or grams of a powder, and the generator works out the cup. It builds the cavity, measures its volume level with the rim, and adjusts the width or depth until the two agree. The readout shows the target, the computed volume and the difference.
- Pick a scoop: a round cup, a rectangular scoop, a coffee scoop, a nested set or a double-ended scoop.
- Set the amount and its unit. For grams, pick the powder.
- Shape it: wide or deep, and narrow enough for your jar if it has to fit one.
- Download, print and check: weigh it full of water before you rely on it.
Units
Kitchen units
| Unit | Millilitres | Defined as |
|---|---|---|
| US teaspoon | 4.929 | 1/3 US tablespoon |
| US tablespoon | 14.787 | 1/2 US fluid ounce |
| US fluid ounce | 29.574 | 1/128 US gallon (231 cubic inches) |
| US cup | 236.588 | 8 US fluid ounces |
| Metric teaspoon | 5 | 5 ml |
| Metric tablespoon | 15 | 15 ml |
| Metric cup | 250 | 250 ml |
A US recipe means US units; most metric countries use 5 ml, 15 ml and 250 ml measures. Nutrition labels in the US round a teaspoon to 5 ml and a cup to 240 ml, so a label’s serving may differ slightly from a measuring cup.
Grams
Scooping by weight
To scoop a weight, the generator divides the grams by the powder’s bulk density: how many grams a level millilitre holds, air included. The values come from the FAO/INFOODS Density Database. Different sources in the database disagree, because a powder’s density depends on its grind, moisture and how it settles, so a scoop by weight is always approximate.
| Powder | g/ml | Published range |
|---|---|---|
| White sugar | 0.88 | 0.70–0.95 |
| Wheat flour, white | 0.67 | 0.48–0.67 |
| Whey powder | 0.56 | one entry |
| Whole milk powder | 0.56 | 0.21–0.56 |
| Drinking chocolate powder | 0.53 | 0.50–0.55 |
| Instant coffee powder | 0.25 | one entry |
| Roasted coffee beans | 0.37 | 0.35–0.38 |
| White rice, raw | 0.82 | 0.72–0.85 |
| Rolled oats | 0.34 | 0.30–0.38 |
| Corn starch, loosely packed | 0.54 | one entry |
| Baking powder | 0.9 | one entry |
For anything not listed (ground coffee, protein blends, pet food, detergent), choose My own powder: print a scoop of a known volume, fill it level, weigh it and divide the grams by the millilitres.
Printing
Printing and using it
- No supports: scoops stand on their flat bottom, and handles are upright fins on the bed. The nested set’s handles rise at 45°.
- Check the volume: fill it level with room-temperature water and weigh it. One millilitre of water weighs about one gram (0.998 g at 20 °C).
- Accuracy: walls a little thicker than drawn shrink the cavity; small scoops are affected most.
- Food contact: print in PETG with a clean nozzle. Layer lines trap powder and moisture, so wash and dry it, keep it for dry foods and replace it when it wears.
- Not for medicine or baby formula: use the measure that comes with the product.
Questions, answered
How much coffee per cup?
That depends on your taste and brewer. Make a scoop for the amount you already use.
Will the bag clip hold?
It is a light spring clip for folded bags. Print it in PETG for a longer life.
Is it food safe?
Printed parts have layer lines that trap residue. Wash it well and use a filament sold for food contact.
Is it free to use?
Yes. No account, no watermark, no limits.
Will it fit my printer?
Choose your printer below the preview. Single scoops are small; a nested set spreads over as many plates as it needs.
How exact is it?
The cavity in the file holds the target to well within 0.5%. A printed scoop is less exact, because printers lay walls slightly thicker or thinner than drawn. Weigh it full of water to check, and adjust the amount if needed.
Is it food safe?
No printed part can promise that. PETG is a common choice for kitchen use, but layer lines hold residue where bacteria can grow, so keep printed scoops for dry foods, wash and dry them and replace them when worn. Do not use one for medicine or baby formula.
Can I sell scoops I print?
The designs you make are yours. The typefaces are open-licensed, which allows making physical products. Do not sell them as accurate measures or as food-safe; that is a claim no one can make for a printed part.
Sources
Print advice is a starting point drawn from these references, checked on 2026-11-12. Community posts are one maker's experience, not a specification.
- Handbook 44, Appendix C: General tables of units of measurement NIST
- Metric kitchen: cooking measurement equivalencies NIST
- Special Publication 430: Household weights and measures NIST
- FAO/INFOODS Density Database, version 2.0 FAO
- Water density U.S. Geological Survey
- Food safe FDM printing Prusa Research
- SIL Open Font License SIL International