Formlabs
Fuse X1
Official Fuse X1 technical illustration, not a photograph.
330 × 330 × 565 mmIndustrial
Printers by type
SLS & polymer powder printers
Polymer powder bed fusion fuses thin layers of nylon or similar powder. The surrounding powder supports the part, so complex shapes print without support structures.
- printer profiles
- 20
- manufacturers
- 9
- introduction years on record
- 2017–2026
- largest box volume (EOS P 770)
- 154 L
Current models with photos
Start with these.
A spread of current and recent machines from different makers, newest first. Not a ranking.
What this page includes
Profiles listing selective laser sintering (SLS), HP Multi Jet Fusion (MJF) or Stratasys Selective Absorption Fusion (SAF).
- Additive Manufacturing Technologies NIST · Checked 2026-10-15
- Selective Laser Sintering (SLS): Complete Guide Formlabs · Checked 2026-10-15
Newest introductions
Largest build volumes
- EOS P 770700 × 380 × 580 mm
- EOS INTEGRA P 450420 × 420 × 500 mm
- EOS P3 NEXT340 × 340 × 600 mm
- EOS P 500500 × 330 × 400 mm
- EOS P 500 FDR500 × 330 × 400 mm
Manufacturers
All SLS & polymer powder printers
20 profiles, alphabetical. Specifications are manufacturer claims linked on each profile; a dash means not verified.
| Printer | Process | Build volume (X × Y × Z) | Year |
|---|---|---|---|
| 3D Systems SLS 380 | SLS | 381 × 330 × 460 mm | — |
| EOS FORMIGA P 110 FDR | SLS | 200 × 250 × 330 mm | — |
| EOS FORMIGA P 110 Velocis | SLS | 200 × 250 × 330 mm | — |
| EOS INTEGRA P 450 | SLS | 420 × 420 × 500 mm | — |
| EOS P 500 | SLS | 500 × 330 × 400 mm | — |
| EOS P 500 FDR | SLS | 500 × 330 × 400 mm | — |
| EOS P 770 | SLS | 700 × 380 × 580 mm | — |
| EOS P3 NEXT | SLS | 340 × 340 × 600 mm | — |
| Formlabs Fuse 1 | SLS | 165 × 165 × 300 mm | 2017 |
| Formlabs Fuse 1+ 30W | SLS | 165 × 165 × 300 mm | 2022 |
| Formlabs Fuse X1 | SLS | 330 × 330 × 565 mm | 2026 |
| HP Jet Fusion 5000 | MJF | 380 × 284 × 250 mm | — |
| HP Jet Fusion 5200 | MJF | 380 × 284 × 380 mm | — |
| HP Jet Fusion 5600 | MJF | 380 × 284 × 380 mm | — |
| Raise3D RMS220 | SLS | 220 × 220 × 350 mm | — |
| Sinterit Lisa X | SLS | — | — |
| Sinterit SUZY | SLS | — | — |
| Sintratec S3 | SLS | — | — |
| Stratasys H350 | SAF | 315 × 208 × 293 mm | — |
| TPM3D S320HT | SLS | — | — |