SLSEOS · official manufacturer imageEOS P 770
Polymer powder-bed system using CO₂ laser sintering.
Source reviews: 2026-10-17.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | P 770 |
| Process | SLS |
| Build envelope (X × Y × Z) | 700 × 380 × 580 mm Sources: EOS P 770 system specifications |
| Nominal box volume | 154.28 L · calculated from the envelope Sources: EOS P 770 system specifications |
| Enclosure | Not verified |
| Materials cited in this profile | Polymer powder Sources: EOS P 770 system specifications |
| Manufacturer listing status | Documented by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Laser Type | CO₂ Sources: EOS P 770 system specifications |
|---|---|
| Laser Count | 2 Sources: EOS P 770 system specifications |
| Laser Power Per Unit (W) | 70 Sources: EOS P 770 system specifications |
Configuration and workflow
The published specification distinguishes build space from installation clearance. The laser configuration and material parameter set determine the applicable process workflow.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: P 770 · Listing status only
Explore EOS through the generationsRead this with the specifications
The cited manufacturer documentation identifies this configuration; regional supply and stock were not established.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
